Package: smartmontools Version: 6.5+svn4324-1~bpo8+1 Severity: normal smartd and manual invocations of smartctl on my external Seagate Momentus 5400.5 controller cause this kernel message to spam my syslogs:
Jun 25 16:55:28 fs kernel: [1443893.546323] sd 10:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE Jun 25 16:55:28 fs kernel: [1443893.546341] sd 10:0:0:0: [sdf] tag#0 Sense Key : Hardware Error [current] [descriptor] Jun 25 16:55:28 fs kernel: [1443893.546351] sd 10:0:0:0: [sdf] tag#0 Add. Sense: No additional sense information Jun 25 16:55:28 fs kernel: [1443893.546364] sd 10:0:0:0: [sdf] tag#0 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 The kernel folk keep pointing the finger at userspace, specifically udisks2. I don't believe I'm using udisks2: fs:/home/tconnors# dpkg --get-selections | grep udisk libudisks2-0:amd64 install udisks2 deinstall https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1618678 https://bugs.freedesktop.org/show_bug.cgi?id=98991 https://bugzilla.kernel.org/show_bug.cgi?id=153241 debian bugs 858416 858141 are the udisks equivalent bugs smartctl otherwise seems to work: fs:/home/tconnors# smartctl -a /dev/sdf smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-0.bpo.3-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.5 Device Model: ST9160310AS Serial Number: 5SV1ELVY LU WWN Device Id: 5 000c50 00e473341 Firmware Version: DE04 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Jun 25 16:59:24 2017 AEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 104 099 006 Pre-fail Always - 6393100 3 Spin_Up_Time 0x0003 099 092 085 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 083 083 020 Old_age Always - 17605 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 116739584 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 23866 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1 12 Power_Cycle_Count 0x0032 094 094 020 Old_age Always - 6785 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 6 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 071 052 045 Old_age Always - 29 (Min/Max 24/36) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 29 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 3706 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 217081 194 Temperature_Celsius 0x0022 029 048 000 Old_age Always - 29 (0 13 0 0 0) 195 Hardware_ECC_Recovered 0x001a 049 031 000 Old_age Always - 6393100 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18075 (19 241 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4024126278 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3276934669 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9642 - # 2 Extended offline Completed without error 00% 9634 - # 3 Short offline Completed without error 00% 9614 - # 4 Short offline Completed without error 00% 9590 - # 5 Short offline Completed without error 00% 9566 - # 6 Short offline Completed without error 00% 9542 - # 7 Extended offline Completed without error 00% 9520 - # 8 Short offline Completed without error 00% 9518 - # 9 Short offline Completed without error 00% 9494 - #10 Short offline Completed without error 00% 9470 - #11 Short offline Completed without error 00% 9446 - #12 Short offline Completed without error 00% 9422 - #13 Short offline Completed without error 00% 9398 - #14 Short offline Completed without error 00% 9374 - #15 Extended offline Completed without error 00% 9352 - #16 Short offline Completed without error 00% 9350 - #17 Short offline Completed without error 00% 9326 - #18 Short offline Completed without error 00% 9302 - #19 Short offline Completed without error 00% 9278 - #20 Short offline Completed without error 00% 9254 - #21 Short offline Completed without error 00% 9230 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. -- System Information: Debian Release: 8.8 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable'), (5, 'testing'), (2, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-0.bpo.3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages smartmontools depends on: ii debianutils 4.4+b1 ii init-system-helpers 1.22 ii libc6 2.19-18+deb8u9 ii libcap-ng0 0.7.4-2 ii libgcc1 1:5.3.1-7 ii libselinux1 2.3-2 ii libstdc++6 5.3.1-7 ii lsb-base 4.1+Debian13+nmu1 Versions of packages smartmontools recommends: ii bsd-mailx [mailx] 8.1.2-0.20141216cvs-2 Versions of packages smartmontools suggests: pn gsmartcontrol <none> pn smart-notifier <none> -- Configuration Files: /etc/default/smartmontools changed: start_smartd=yes -- no debconf information
