Package: xserver-xorg-video-qxl
Version: 0.1.4+20161126git4d7160c-1
Severity: normal
Dear Maintainer,
* What led up to the situation?
Debian 9 fresh install in QEMU, qxl video; KDE desktop
It worked on first boot, but crashed on 2nd login.
I suspect the difference is that I switched screen res,
which worked fine during the session; doesn't seem to want to
afterwards though
* What exactly did you do (or not do) that was effective (or
ineffective)?
See the x log below
* What was the outcome of this action?
Can't log back into my KDE session
* What outcome did you expect instead?
A happy KDE session
This qemu is running on Fedora 26; other guests are working so I think the bug
here
is in the X qxl driver.
Dave
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Red Hat, Inc. QXL paravirtual graphic
card [1b36:0100] (rev 04)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.9.0-3-amd64 (debian-ker...@lists.debian.org) (gcc version 6.3.0
20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2 (2017-06-12)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 17217 Jun 18 14:34 /var/log/Xorg.0.log
Contents of last Xorg X server log file (/var/log/Xorg.0.log.old):
---------------------------------------------------------------------
[ 375.321] (--) Log file renamed from "/var/log/Xorg.pid-1532.log" to
"/var/log/Xorg.0.log"
[ 375.321]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 375.321] X Protocol Version 11, Revision 0
[ 375.321] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 375.321] Current Operating System: Linux debian9vm 4.9.0-3-amd64 #1 SMP
Debian 4.9.30-2 (2017-06-12) x86_64
[ 375.321] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64
root=/dev/mapper/debian9vm--vg-root ro quiet
[ 375.321] Build Date: 03 March 2017 03:14:41PM
[ 375.321] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 375.321] Current version of pixman: 0.34.0
[ 375.321] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 375.321] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 375.321] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 18 14:34:33
2017
[ 375.321] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 375.322] (==) No Layout section. Using the first Screen section.
[ 375.322] (==) No screen section available. Using defaults.
[ 375.322] (**) |-->Screen "Default Screen Section" (0)
[ 375.322] (**) | |-->Monitor "<default monitor>"
[ 375.322] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 375.322] (==) Automatically adding devices
[ 375.322] (==) Automatically enabling devices
[ 375.322] (==) Automatically adding GPU devices
[ 375.322] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 375.322] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 375.322] Entry deleted from font path.
[ 375.322] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 375.322] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 375.322] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 375.322] (II) Loader magic: 0x5619ecc04e00
[ 375.322] (II) Module ABI versions:
[ 375.322] X.Org ANSI C Emulation: 0.4
[ 375.322] X.Org Video Driver: 23.0
[ 375.322] X.Org XInput driver : 24.1
[ 375.322] X.Org Server Extension : 10.0
[ 375.323] (++) using VT number 7
[ 375.323] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[ 375.323] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 375.328] (--) PCI:*(0:0:2:0) 1b36:0100:1af4:1100 rev 4, Mem @
0xf4000000/67108864, 0xf8000000/67108864, 0xfc054000/8192, I/O @ 0x0000c0c0/32,
BIOS @ 0x????????/131072
[ 375.328] (II) LoadModule: "glx"
[ 375.328] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 375.329] (II) Module glx: vendor="X.Org Foundation"
[ 375.329] compiled for 1.19.2, module version = 1.0.0
[ 375.329] ABI class: X.Org Server Extension, version 10.0
[ 375.329] (==) Matched qxl as autoconfigured driver 0
[ 375.329] (==) Matched qxl as autoconfigured driver 1
[ 375.329] (==) Matched modesetting as autoconfigured driver 2
[ 375.329] (==) Matched fbdev as autoconfigured driver 3
[ 375.329] (==) Matched vesa as autoconfigured driver 4
[ 375.329] (==) Assigned the driver to the xf86ConfigLayout
[ 375.329] (II) LoadModule: "qxl"
[ 375.329] (II) Loading /usr/lib/xorg/modules/drivers/qxl_drv.so
[ 375.329] (II) Module qxl: vendor="X.Org Foundation"
[ 375.329] compiled for 1.19.0, module version = 0.1.4
[ 375.329] Module class: X.Org Video Driver
[ 375.329] ABI class: X.Org Video Driver, version 23.0
[ 375.329] (II) LoadModule: "modesetting"
[ 375.329] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 375.329] (II) Module modesetting: vendor="X.Org Foundation"
[ 375.329] compiled for 1.19.2, module version = 1.19.2
[ 375.329] Module class: X.Org Video Driver
[ 375.329] ABI class: X.Org Video Driver, version 23.0
[ 375.329] (II) LoadModule: "fbdev"
[ 375.329] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 375.329] (II) Module fbdev: vendor="X.Org Foundation"
[ 375.329] compiled for 1.19.0, module version = 0.4.4
[ 375.329] Module class: X.Org Video Driver
[ 375.329] ABI class: X.Org Video Driver, version 23.0
[ 375.329] (II) LoadModule: "vesa"
[ 375.329] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 375.329] (II) Module vesa: vendor="X.Org Foundation"
[ 375.329] compiled for 1.19.0, module version = 2.3.4
[ 375.329] Module class: X.Org Video Driver
[ 375.329] ABI class: X.Org Video Driver, version 23.0
[ 375.329] (II) qxl: Driver for QXL virtual graphics: QXL 1
[ 375.329] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 375.329] (II) FBDEV: driver for framebuffer: fbdev
[ 375.329] (II) VESA: driver for VESA chipsets: vesa
[ 375.332] (II) [KMS] Kernel modesetting enabled.
[ 375.332] (WW) Falling back to old probe method for modesetting
[ 375.332] (WW) Falling back to old probe method for fbdev
[ 375.332] (II) Loading sub module "fbdevhw"
[ 375.332] (II) LoadModule: "fbdevhw"
[ 375.332] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 375.332] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 375.332] compiled for 1.19.2, module version = 0.0.2
[ 375.332] ABI class: X.Org Video Driver, version 23.0
[ 375.332] (WW) Falling back to old probe method for vesa
[ 375.332] (II) qxl(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 375.332] (==) qxl(0): Depth 24, (--) framebuffer bpp 32
[ 375.332] (==) qxl(0): RGB weight 888
[ 375.332] (==) qxl(0): Default visual is TrueColor
[ 375.332] (==) qxl(0): Using gamma correction (1.0, 1.0, 1.0)
[ 375.332] (II) qxl(0): Deferred Frames: Disabled
[ 375.332] (II) qxl(0): Offscreen Surfaces: Enabled
[ 375.332] (II) qxl(0): Image Cache: Enabled
[ 375.332] (II) qxl(0): Fallback Cache: Enabled
[ 375.332] (==) qxl(0): DPI set to (96, 96)
[ 375.332] (II) Loading sub module "fb"
[ 375.332] (II) LoadModule: "fb"
[ 375.333] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 375.333] (II) Module fb: vendor="X.Org Foundation"
[ 375.333] compiled for 1.19.2, module version = 1.0.0
[ 375.333] ABI class: X.Org ANSI C Emulation, version 0.4
[ 375.333] (II) Loading sub module "ramdac"
[ 375.333] (II) LoadModule: "ramdac"
[ 375.333] (II) Module "ramdac" already built-in
[ 375.333] (II) qxl(0): Output Virtual-0 has no monitor section
[ 375.336] (II) qxl(0): Output Virtual-1 has no monitor section
[ 375.336] (II) qxl(0): Output Virtual-2 has no monitor section
[ 375.336] (II) qxl(0): Output Virtual-3 has no monitor section
[ 375.336] (II) qxl(0): EDID for output Virtual-0
[ 375.336] (II) qxl(0): Printing probed modes for output Virtual-0
[ 375.336] (II) qxl(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328
768 771 775 798 -hsync +vsync (47.8 kHz P)
[ 375.336] (II) qxl(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256
2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz)
[ 375.336] (II) qxl(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248
2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 375.336] (II) qxl(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880
2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
[ 375.336] (II) qxl(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 375.336] (II) qxl(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632
1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[ 375.336] (II) qxl(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496
1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[ 375.336] (II) qxl(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904
900 903 909 934 -hsync +vsync (55.9 kHz)
[ 375.336] (II) qxl(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696
960 963 967 996 -hsync +vsync (59.7 kHz)
[ 375.336] (II) qxl(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680
854 857 867 887 -hsync +vsync (53.1 kHz)
[ 375.336] (II) qxl(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680
800 803 809 831 -hsync +vsync (49.7 kHz)
[ 375.336] (II) qxl(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664
720 723 728 748 -hsync +vsync (44.8 kHz)
[ 375.336] (II) qxl(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504
768 771 781 798 -hsync +vsync (47.7 kHz)
[ 375.336] (II) qxl(0): Modeline "800x600"x59.9 38.25 800 832 912 1024
600 603 607 624 -hsync +vsync (37.4 kHz)
[ 375.336] (II) qxl(0): Modeline "848x480"x59.7 31.50 848 872 952 1056
480 483 493 500 -hsync +vsync (29.8 kHz)
[ 375.336] (II) qxl(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480
483 493 500 -hsync +vsync (29.9 kHz)
[ 375.336] (II) qxl(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480
483 487 500 -hsync +vsync (29.7 kHz)
[ 375.336] (II) qxl(0): EDID for output Virtual-1
[ 375.336] (II) qxl(0): EDID for output Virtual-2
[ 375.336] (II) qxl(0): EDID for output Virtual-3
[ 375.336] (II) qxl(0): Output Virtual-0 connected
[ 375.336] (II) qxl(0): Output Virtual-1 disconnected
[ 375.336] (II) qxl(0): Output Virtual-2 disconnected
[ 375.336] (II) qxl(0): Output Virtual-3 disconnected
[ 375.336] (II) qxl(0): Using exact sizes for initial modes
[ 375.336] (II) qxl(0): Output Virtual-0 using initial mode 1024x768 +0+0
[ 375.336] (II) qxl(0): PreInit complete
[ 375.336] (II) UnloadModule: "modesetting"
[ 375.336] (II) Unloading modesetting
[ 375.336] (II) UnloadModule: "fbdev"
[ 375.336] (II) Unloading fbdev
[ 375.336] (II) UnloadSubModule: "fbdevhw"
[ 375.336] (II) Unloading fbdevhw
[ 375.336] (II) UnloadModule: "vesa"
[ 375.336] (II) Unloading vesa
[ 375.336] (--) Depth 24 pixmap format is 32 bpp
[ 375.336] (II) UXA(0): Driver registered support for the following
operations:
[ 375.336] (II) solid
[ 375.336] (II) copy
[ 375.336] (II) composite (RENDER acceleration)
[ 375.336] (II) put_image
[ 375.336] (II) qxl(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 375.337] resizing primary to 1024x768
[ 375.337] primary is 0x5619eea0c4d0
[ 375.341] (--) RandR disabled
[ 375.344] (II) SELinux: Disabled on system
[ 375.344] (II) AIGLX: Screen 0 is not DRI2 capable
[ 375.344] (EE) AIGLX: reverting to software rendering
[ 375.363] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 375.364] (II) IGLX: Loaded and initialized swrast
[ 375.364] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 375.364] (II) qxl(0): Setting screen physical size to 270 x 203
[ 375.392] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 375.392] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 375.392] (II) LoadModule: "libinput"
[ 375.392] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 375.393] (II) Module libinput: vendor="X.Org Foundation"
[ 375.393] compiled for 1.19.0, module version = 0.23.0
[ 375.393] Module class: X.Org XInput Driver
[ 375.393] ABI class: X.Org XInput driver, version 24.1
[ 375.393] (II) Using input driver 'libinput' for 'Power Button'
[ 375.393] (**) Power Button: always reports core events
[ 375.393] (**) Option "Device" "/dev/input/event3"
[ 375.393] (**) Option "_source" "server/udev"
[ 375.394] (II) input device 'Power Button', /dev/input/event3 is tagged by
udev as: Keyboard
[ 375.394] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 375.408] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 375.408] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 375.408] (**) Option "xkb_model" "pc105"
[ 375.408] (**) Option "xkb_layout" "gb"
[ 375.427] (II) input device 'Power Button', /dev/input/event3 is tagged by
udev as: Keyboard
[ 375.427] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 375.428] (II) config/udev: Adding input device QEMU QEMU USB Tablet
(/dev/input/event1)
[ 375.428] (**) QEMU QEMU USB Tablet: Applying InputClass "libinput pointer
catchall"
[ 375.428] (II) Using input driver 'libinput' for 'QEMU QEMU USB Tablet'
[ 375.428] (**) QEMU QEMU USB Tablet: always reports core events
[ 375.428] (**) Option "Device" "/dev/input/event1"
[ 375.428] (**) Option "_source" "server/udev"
[ 375.488] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is
tagged by udev as: Mouse
[ 375.488] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is a
pointer caps
[ 375.520] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/event1"
[ 375.520] (II) XINPUT: Adding extended input device "QEMU QEMU USB Tablet"
(type: MOUSE, id 7)
[ 375.520] (**) Option "AccelerationScheme" "none"
[ 375.520] (**) QEMU QEMU USB Tablet: (accel) selected scheme none/0
[ 375.520] (**) QEMU QEMU USB Tablet: (accel) acceleration factor: 2.000
[ 375.520] (**) QEMU QEMU USB Tablet: (accel) acceleration threshold: 4
[ 375.580] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is
tagged by udev as: Mouse
[ 375.580] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is a
pointer caps
[ 375.581] (II) config/udev: Adding input device QEMU QEMU USB Tablet
(/dev/input/js0)
[ 375.581] (II) No input driver specified, ignoring this device.
[ 375.581] (II) This device may have been added with another device file.
[ 375.582] (II) config/udev: Adding input device QEMU QEMU USB Tablet
(/dev/input/mouse0)
[ 375.582] (II) No input driver specified, ignoring this device.
[ 375.582] (II) This device may have been added with another device file.
[ 375.582] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 375.582] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput
keyboard catchall"
[ 375.582] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[ 375.582] (**) AT Translated Set 2 keyboard: always reports core events
[ 375.582] (**) Option "Device" "/dev/input/event0"
[ 375.582] (**) Option "_source" "server/udev"
[ 375.583] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is tagged by udev as: Keyboard
[ 375.583] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is a keyboard
[ 375.612] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 375.612] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 8)
[ 375.612] (**) Option "xkb_model" "pc105"
[ 375.612] (**) Option "xkb_layout" "gb"
[ 375.613] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is tagged by udev as: Keyboard
[ 375.613] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is a keyboard
[ 375.613] (II) config/udev: Adding input device ImExPS/2 Generic Explorer
Mouse (/dev/input/event2)
[ 375.613] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass
"libinput pointer catchall"
[ 375.613] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer
Mouse'
[ 375.613] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 375.613] (**) Option "Device" "/dev/input/event2"
[ 375.613] (**) Option "_source" "server/udev"
[ 375.614] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is tagged by udev as: Mouse
[ 375.614] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is a pointer caps
[ 375.644] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[ 375.644] (II) XINPUT: Adding extended input device "ImExPS/2 Generic
Explorer Mouse" (type: MOUSE, id 9)
[ 375.644] (**) Option "AccelerationScheme" "none"
[ 375.644] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme
none/0
[ 375.644] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor:
2.000
[ 375.644] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration
threshold: 4
[ 375.645] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is tagged by udev as: Mouse
[ 375.645] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is a pointer caps
[ 375.645] (II) config/udev: Adding input device ImExPS/2 Generic Explorer
Mouse (/dev/input/mouse1)
[ 375.645] (II) No input driver specified, ignoring this device.
[ 375.645] (II) This device may have been added with another device file.
[ 375.646] (II) config/udev: Adding input device PC Speaker
(/dev/input/event4)
[ 375.646] (II) No input driver specified, ignoring this device.
[ 375.646] (II) This device may have been added with another device file.
[ 379.952] (II) qxl(0): Allocate new frame buffer 1440x900 stride
[ 379.954] (EE)
[ 379.955] (EE) Backtrace:
[ 379.955] (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4a) [0x5619ec97746a]
[ 379.955] (EE) 1: /usr/lib/xorg/Xorg (0x5619ec7be000+0x1bd219)
[0x5619ec97b219]
[ 379.955] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0
(0x7f355ff62000+0x110c0) [0x7f355ff730c0]
[ 379.955] (EE) 3: /usr/lib/xorg/modules/drivers/qxl_drv.so
(0x7f355bcd5000+0x12c13) [0x7f355bce7c13]
[ 379.955] (EE) 4: /usr/lib/xorg/modules/drivers/qxl_drv.so
(0x7f355bcd5000+0x139f1) [0x7f355bce89f1]
[ 379.955] (EE) 5: /usr/lib/xorg/modules/drivers/qxl_drv.so
(0x7f355bcd5000+0x13d16) [0x7f355bce8d16]
[ 379.955] (EE) 6: /usr/lib/xorg/Xorg (0x5619ec7be000+0xd3e7e)
[0x5619ec891e7e]
[ 379.955] (EE) 7: /usr/lib/xorg/Xorg (ProcRRSetScreenSize+0xe8)
[0x5619ec8e3ab8]
[ 379.955] (EE) 8: /usr/lib/xorg/Xorg (0x5619ec7be000+0x545e5)
[0x5619ec8125e5]
[ 379.955] (EE) 9: /usr/lib/xorg/Xorg (0x5619ec7be000+0x58568)
[0x5619ec816568]
[ 379.955] (EE) 10: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf1)
[0x7f355fbe32b1]
[ 379.955] (EE) 11: /usr/lib/xorg/Xorg (_start+0x2a) [0x5619ec80021a]
[ 379.955] (EE)
[ 379.955] (EE) Segmentation fault at address 0x1a
[ 379.955] (EE)
Fatal server error:
[ 379.955] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 379.955] (EE)
[ 379.955] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 379.955] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[ 379.955] (EE)
[ 380.152] (EE) Server terminated with error (1). Closing log file.
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 380.283] (--) Log file renamed from "/var/log/Xorg.pid-1710.log" to
"/var/log/Xorg.0.log"
[ 380.284]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 380.284] X Protocol Version 11, Revision 0
[ 380.284] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 380.284] Current Operating System: Linux debian9vm 4.9.0-3-amd64 #1 SMP
Debian 4.9.30-2 (2017-06-12) x86_64
[ 380.284] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64
root=/dev/mapper/debian9vm--vg-root ro quiet
[ 380.284] Build Date: 03 March 2017 03:14:41PM
[ 380.284] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 380.284] Current version of pixman: 0.34.0
[ 380.284] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 380.284] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 380.284] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 18 14:34:38
2017
[ 380.284] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 380.284] (==) No Layout section. Using the first Screen section.
[ 380.284] (==) No screen section available. Using defaults.
[ 380.284] (**) |-->Screen "Default Screen Section" (0)
[ 380.284] (**) | |-->Monitor "<default monitor>"
[ 380.284] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 380.284] (==) Automatically adding devices
[ 380.284] (==) Automatically enabling devices
[ 380.284] (==) Automatically adding GPU devices
[ 380.284] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 380.284] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 380.284] Entry deleted from font path.
[ 380.284] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 380.284] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 380.284] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 380.284] (II) Loader magic: 0x5570adb19e00
[ 380.284] (II) Module ABI versions:
[ 380.284] X.Org ANSI C Emulation: 0.4
[ 380.284] X.Org Video Driver: 23.0
[ 380.284] X.Org XInput driver : 24.1
[ 380.284] X.Org Server Extension : 10.0
[ 380.286] (++) using VT number 7
[ 380.286] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[ 380.286] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 380.293] (--) PCI:*(0:0:2:0) 1b36:0100:1af4:1100 rev 4, Mem @
0xf4000000/67108864, 0xf8000000/67108864, 0xfc054000/8192, I/O @ 0x0000c0c0/32,
BIOS @ 0x????????/131072
[ 380.293] (II) LoadModule: "glx"
[ 380.293] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 380.294] (II) Module glx: vendor="X.Org Foundation"
[ 380.294] compiled for 1.19.2, module version = 1.0.0
[ 380.294] ABI class: X.Org Server Extension, version 10.0
[ 380.294] (==) Matched qxl as autoconfigured driver 0
[ 380.294] (==) Matched qxl as autoconfigured driver 1
[ 380.294] (==) Matched modesetting as autoconfigured driver 2
[ 380.294] (==) Matched fbdev as autoconfigured driver 3
[ 380.294] (==) Matched vesa as autoconfigured driver 4
[ 380.294] (==) Assigned the driver to the xf86ConfigLayout
[ 380.294] (II) LoadModule: "qxl"
[ 380.294] (II) Loading /usr/lib/xorg/modules/drivers/qxl_drv.so
[ 380.294] (II) Module qxl: vendor="X.Org Foundation"
[ 380.294] compiled for 1.19.0, module version = 0.1.4
[ 380.294] Module class: X.Org Video Driver
[ 380.294] ABI class: X.Org Video Driver, version 23.0
[ 380.294] (II) LoadModule: "modesetting"
[ 380.294] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 380.294] (II) Module modesetting: vendor="X.Org Foundation"
[ 380.294] compiled for 1.19.2, module version = 1.19.2
[ 380.294] Module class: X.Org Video Driver
[ 380.294] ABI class: X.Org Video Driver, version 23.0
[ 380.294] (II) LoadModule: "fbdev"
[ 380.294] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 380.294] (II) Module fbdev: vendor="X.Org Foundation"
[ 380.294] compiled for 1.19.0, module version = 0.4.4
[ 380.294] Module class: X.Org Video Driver
[ 380.294] ABI class: X.Org Video Driver, version 23.0
[ 380.294] (II) LoadModule: "vesa"
[ 380.294] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 380.294] (II) Module vesa: vendor="X.Org Foundation"
[ 380.294] compiled for 1.19.0, module version = 2.3.4
[ 380.294] Module class: X.Org Video Driver
[ 380.294] ABI class: X.Org Video Driver, version 23.0
[ 380.295] (II) qxl: Driver for QXL virtual graphics: QXL 1
[ 380.295] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 380.295] (II) FBDEV: driver for framebuffer: fbdev
[ 380.295] (II) VESA: driver for VESA chipsets: vesa
[ 380.297] (II) [KMS] Kernel modesetting enabled.
[ 380.297] (WW) Falling back to old probe method for modesetting
[ 380.297] (WW) Falling back to old probe method for fbdev
[ 380.297] (II) Loading sub module "fbdevhw"
[ 380.297] (II) LoadModule: "fbdevhw"
[ 380.297] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 380.297] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 380.297] compiled for 1.19.2, module version = 0.0.2
[ 380.297] ABI class: X.Org Video Driver, version 23.0
[ 380.297] (WW) Falling back to old probe method for vesa
[ 380.297] (II) qxl(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 380.297] (==) qxl(0): Depth 24, (--) framebuffer bpp 32
[ 380.297] (==) qxl(0): RGB weight 888
[ 380.297] (==) qxl(0): Default visual is TrueColor
[ 380.297] (==) qxl(0): Using gamma correction (1.0, 1.0, 1.0)
[ 380.297] (II) qxl(0): Deferred Frames: Disabled
[ 380.297] (II) qxl(0): Offscreen Surfaces: Enabled
[ 380.297] (II) qxl(0): Image Cache: Enabled
[ 380.297] (II) qxl(0): Fallback Cache: Enabled
[ 380.297] (==) qxl(0): DPI set to (96, 96)
[ 380.297] (II) Loading sub module "fb"
[ 380.297] (II) LoadModule: "fb"
[ 380.297] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 380.297] (II) Module fb: vendor="X.Org Foundation"
[ 380.297] compiled for 1.19.2, module version = 1.0.0
[ 380.297] ABI class: X.Org ANSI C Emulation, version 0.4
[ 380.297] (II) Loading sub module "ramdac"
[ 380.297] (II) LoadModule: "ramdac"
[ 380.297] (II) Module "ramdac" already built-in
[ 380.297] (II) qxl(0): Output Virtual-0 has no monitor section
[ 380.297] (II) qxl(0): Output Virtual-1 has no monitor section
[ 380.297] (II) qxl(0): Output Virtual-2 has no monitor section
[ 380.297] (II) qxl(0): Output Virtual-3 has no monitor section
[ 380.297] (II) qxl(0): EDID for output Virtual-0
[ 380.297] (II) qxl(0): Printing probed modes for output Virtual-0
[ 380.297] (II) qxl(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328
768 771 775 798 -hsync +vsync (47.8 kHz P)
[ 380.297] (II) qxl(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256
2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz)
[ 380.297] (II) qxl(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248
2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 380.297] (II) qxl(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880
2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
[ 380.297] (II) qxl(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 380.297] (II) qxl(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632
1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[ 380.297] (II) qxl(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496
1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[ 380.297] (II) qxl(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904
900 903 909 934 -hsync +vsync (55.9 kHz)
[ 380.297] (II) qxl(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696
960 963 967 996 -hsync +vsync (59.7 kHz)
[ 380.297] (II) qxl(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680
854 857 867 887 -hsync +vsync (53.1 kHz)
[ 380.298] (II) qxl(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680
800 803 809 831 -hsync +vsync (49.7 kHz)
[ 380.298] (II) qxl(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664
720 723 728 748 -hsync +vsync (44.8 kHz)
[ 380.298] (II) qxl(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504
768 771 781 798 -hsync +vsync (47.7 kHz)
[ 380.298] (II) qxl(0): Modeline "800x600"x59.9 38.25 800 832 912 1024
600 603 607 624 -hsync +vsync (37.4 kHz)
[ 380.298] (II) qxl(0): Modeline "848x480"x59.7 31.50 848 872 952 1056
480 483 493 500 -hsync +vsync (29.8 kHz)
[ 380.298] (II) qxl(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480
483 493 500 -hsync +vsync (29.9 kHz)
[ 380.298] (II) qxl(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480
483 487 500 -hsync +vsync (29.7 kHz)
[ 380.298] (II) qxl(0): EDID for output Virtual-1
[ 380.298] (II) qxl(0): EDID for output Virtual-2
[ 380.298] (II) qxl(0): EDID for output Virtual-3
[ 380.298] (II) qxl(0): Output Virtual-0 connected
[ 380.298] (II) qxl(0): Output Virtual-1 disconnected
[ 380.298] (II) qxl(0): Output Virtual-2 disconnected
[ 380.298] (II) qxl(0): Output Virtual-3 disconnected
[ 380.298] (II) qxl(0): Using exact sizes for initial modes
[ 380.298] (II) qxl(0): Output Virtual-0 using initial mode 1024x768 +0+0
[ 380.298] (II) qxl(0): PreInit complete
[ 380.298] (II) UnloadModule: "modesetting"
[ 380.298] (II) Unloading modesetting
[ 380.298] (II) UnloadModule: "fbdev"
[ 380.298] (II) Unloading fbdev
[ 380.298] (II) UnloadSubModule: "fbdevhw"
[ 380.298] (II) Unloading fbdevhw
[ 380.298] (II) UnloadModule: "vesa"
[ 380.298] (II) Unloading vesa
[ 380.298] (--) Depth 24 pixmap format is 32 bpp
[ 380.298] (II) UXA(0): Driver registered support for the following
operations:
[ 380.298] (II) solid
[ 380.298] (II) copy
[ 380.298] (II) composite (RENDER acceleration)
[ 380.298] (II) put_image
[ 380.298] (II) qxl(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 380.298] resizing primary to 1024x768
[ 380.298] primary is 0x5570af50d4d0
[ 380.302] (--) RandR disabled
[ 380.309] (II) SELinux: Disabled on system
[ 380.309] (II) AIGLX: Screen 0 is not DRI2 capable
[ 380.309] (EE) AIGLX: reverting to software rendering
[ 380.328] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 380.329] (II) IGLX: Loaded and initialized swrast
[ 380.329] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 380.329] (II) qxl(0): Setting screen physical size to 270 x 203
[ 380.357] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 380.357] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 380.357] (II) LoadModule: "libinput"
[ 380.358] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 380.359] (II) Module libinput: vendor="X.Org Foundation"
[ 380.359] compiled for 1.19.0, module version = 0.23.0
[ 380.359] Module class: X.Org XInput Driver
[ 380.359] ABI class: X.Org XInput driver, version 24.1
[ 380.359] (II) Using input driver 'libinput' for 'Power Button'
[ 380.359] (**) Power Button: always reports core events
[ 380.359] (**) Option "Device" "/dev/input/event3"
[ 380.359] (**) Option "_source" "server/udev"
[ 380.359] (II) input device 'Power Button', /dev/input/event3 is tagged by
udev as: Keyboard
[ 380.359] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 380.368] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 380.368] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 380.368] (**) Option "xkb_model" "pc105"
[ 380.368] (**) Option "xkb_layout" "gb"
[ 380.387] (II) input device 'Power Button', /dev/input/event3 is tagged by
udev as: Keyboard
[ 380.387] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 380.388] (II) config/udev: Adding input device QEMU QEMU USB Tablet
(/dev/input/event1)
[ 380.388] (**) QEMU QEMU USB Tablet: Applying InputClass "libinput pointer
catchall"
[ 380.388] (II) Using input driver 'libinput' for 'QEMU QEMU USB Tablet'
[ 380.388] (**) QEMU QEMU USB Tablet: always reports core events
[ 380.388] (**) Option "Device" "/dev/input/event1"
[ 380.388] (**) Option "_source" "server/udev"
[ 380.448] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is
tagged by udev as: Mouse
[ 380.448] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is a
pointer caps
[ 380.476] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/event1"
[ 380.476] (II) XINPUT: Adding extended input device "QEMU QEMU USB Tablet"
(type: MOUSE, id 7)
[ 380.476] (**) Option "AccelerationScheme" "none"
[ 380.476] (**) QEMU QEMU USB Tablet: (accel) selected scheme none/0
[ 380.476] (**) QEMU QEMU USB Tablet: (accel) acceleration factor: 2.000
[ 380.476] (**) QEMU QEMU USB Tablet: (accel) acceleration threshold: 4
[ 380.536] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is
tagged by udev as: Mouse
[ 380.536] (II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is a
pointer caps
[ 380.537] (II) config/udev: Adding input device QEMU QEMU USB Tablet
(/dev/input/js0)
[ 380.537] (II) No input driver specified, ignoring this device.
[ 380.537] (II) This device may have been added with another device file.
[ 380.538] (II) config/udev: Adding input device QEMU QEMU USB Tablet
(/dev/input/mouse0)
[ 380.538] (II) No input driver specified, ignoring this device.
[ 380.538] (II) This device may have been added with another device file.
[ 380.538] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 380.538] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput
keyboard catchall"
[ 380.538] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[ 380.538] (**) AT Translated Set 2 keyboard: always reports core events
[ 380.538] (**) Option "Device" "/dev/input/event0"
[ 380.538] (**) Option "_source" "server/udev"
[ 380.539] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is tagged by udev as: Keyboard
[ 380.539] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is a keyboard
[ 380.564] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 380.564] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 8)
[ 380.564] (**) Option "xkb_model" "pc105"
[ 380.564] (**) Option "xkb_layout" "gb"
[ 380.565] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is tagged by udev as: Keyboard
[ 380.565] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is a keyboard
[ 380.565] (II) config/udev: Adding input device ImExPS/2 Generic Explorer
Mouse (/dev/input/event2)
[ 380.565] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass
"libinput pointer catchall"
[ 380.565] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer
Mouse'
[ 380.565] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 380.565] (**) Option "Device" "/dev/input/event2"
[ 380.565] (**) Option "_source" "server/udev"
[ 380.566] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is tagged by udev as: Mouse
[ 380.566] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is a pointer caps
[ 380.600] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[ 380.600] (II) XINPUT: Adding extended input device "ImExPS/2 Generic
Explorer Mouse" (type: MOUSE, id 9)
[ 380.600] (**) Option "AccelerationScheme" "none"
[ 380.600] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme
none/0
[ 380.600] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor:
2.000
[ 380.600] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration
threshold: 4
[ 380.601] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is tagged by udev as: Mouse
[ 380.601] (II) input device 'ImExPS/2 Generic Explorer Mouse',
/dev/input/event2 is a pointer caps
[ 380.601] (II) config/udev: Adding input device ImExPS/2 Generic Explorer
Mouse (/dev/input/mouse1)
[ 380.601] (II) No input driver specified, ignoring this device.
[ 380.601] (II) This device may have been added with another device file.
[ 380.602] (II) config/udev: Adding input device PC Speaker
(/dev/input/event4)
[ 380.602] (II) No input driver specified, ignoring this device.
[ 380.602] (II) This device may have been added with another device file.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5769054
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=6433135
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P:
/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3
E: ABS=3
E:
DEVPATH=/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_05_7-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=QEMU_USB_Tablet
E: ID_MODEL_ENC=QEMU\x20USB\x20Tablet
E: ID_MODEL_ID=0001
E: ID_PATH=pci-0000:00:05.7-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_05_7-usb-0_1_1_0
E: ID_REVISION=0000
E: ID_SERIAL=QEMU_QEMU_USB_Tablet_42
E: ID_SERIAL_SHORT=42
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=QEMU
E: ID_VENDOR_ENC=QEMU
E: ID_VENDOR_ID=0627
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v0627p0001e0001-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw
E: MSC=10
E: NAME="QEMU QEMU USB Tablet"
E: PHYS="usb-0000:00:05.7-1/input0"
E: PRODUCT=3/627/1/1
E: PROP=0
E: REL=100
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ="42"
E: USEC_INITIALIZED=1443460
P:
/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/event1
N: input/event1
S: input/by-id/usb-QEMU_QEMU_USB_Tablet_42-event-mouse
S: input/by-path/pci-0000:00:05.7-usb-0:1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-QEMU_QEMU_USB_Tablet_42-event-mouse
/dev/input/by-path/pci-0000:00:05.7-usb-0:1:1.0-event-mouse
E: DEVNAME=/dev/input/event1
E:
DEVPATH=/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=QEMU_USB_Tablet
E: ID_MODEL_ENC=QEMU\x20USB\x20Tablet
E: ID_MODEL_ID=0001
E: ID_PATH=pci-0000:00:05.7-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_05_7-usb-0_1_1_0
E: ID_REVISION=0000
E: ID_SERIAL=QEMU_QEMU_USB_Tablet_42
E: ID_SERIAL_SHORT=42
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=QEMU
E: ID_VENDOR_ENC=QEMU
E: ID_VENDOR_ID=0627
E: LIBINPUT_DEVICE_GROUP=3/627/1/1:usb-0000:00:05.7-1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6434098
P:
/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/js0
N: input/js0
S: input/by-id/usb-QEMU_QEMU_USB_Tablet_42-mouse
S: input/by-path/pci-0000:00:05.7-usb-0:1:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:05.7-usb-0:1:1.0-mouse
/dev/input/by-id/usb-QEMU_QEMU_USB_Tablet_42-mouse
E: DEVNAME=/dev/input/js0
E:
DEVPATH=/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/js0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=QEMU_USB_Tablet
E: ID_MODEL_ENC=QEMU\x20USB\x20Tablet
E: ID_MODEL_ID=0001
E: ID_PATH=pci-0000:00:05.7-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_05_7-usb-0_1_1_0
E: ID_REVISION=0000
E: ID_SERIAL=QEMU_QEMU_USB_Tablet_42
E: ID_SERIAL_SHORT=42
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=QEMU
E: ID_VENDOR_ENC=QEMU
E: ID_VENDOR_ID=0627
E: MAJOR=13
E: MINOR=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5851484
P:
/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/mouse0
N: input/mouse0
S: input/by-id/usb-QEMU_QEMU_USB_Tablet_42-mouse
S: input/by-path/pci-0000:00:05.7-usb-0:1:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:05.7-usb-0:1:1.0-mouse
/dev/input/by-id/usb-QEMU_QEMU_USB_Tablet_42-mouse
E: DEVNAME=/dev/input/mouse0
E:
DEVPATH=/devices/pci0000:00/0000:00:05.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input3/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=QEMU_USB_Tablet
E: ID_MODEL_ENC=QEMU\x20USB\x20Tablet
E: ID_MODEL_ID=0001
E: ID_PATH=pci-0000:00:05.7-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_05_7-usb-0_1_1_0
E: ID_REVISION=0000
E: ID_SERIAL=QEMU_QEMU_USB_Tablet_42
E: ID_SERIAL_SHORT=42
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=QEMU
E: ID_VENDOR_ENC=QEMU
E: ID_VENDOR_ID=0627
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1443928
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E:
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=888542
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab41:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6432786
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input2
E: DEVPATH=/devices/platform/i8042/serio1/input/input2
E: EV=7
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: KEY=1f0000 0 0 0 0
E:
MODALIAS=input:b0011v0002p0006e0000-e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw
E: NAME="ImExPS/2 Generic Explorer Mouse"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/6/0
E: PROP=1
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1752865
P: /devices/platform/i8042/serio1/input/input2/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event2
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: LIBINPUT_DEVICE_GROUP=11/2/6/0:isa0060/serio1
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6434442
P: /devices/platform/i8042/serio1/input/input2/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1753394
P: /devices/platform/pcspkr/input/input5
E: DEVPATH=/devices/platform/pcspkr/input/input5
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5793012
P: /devices/platform/pcspkr/input/input5/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/pcspkr/input/input5/event4
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6433561
DRM Information from dmesg:
---------------------------
[ 1.029477] Linux agpgart interface v0.103
[ 5.804154] [drm] Initialized
[ 5.909759] [drm] Device Version 0.0
[ 5.909760] [drm] Compression level 0 log level 0
[ 5.909761] [drm] Currently using mode #0, list at 0x488
[ 5.909762] [drm] 12286 io pages at offset 0x1000000
[ 5.909762] [drm] 16777216 byte draw area at offset 0x0
[ 5.909762] [drm] RAM header offset: 0x3ffe000
[ 5.909763] [drm] rom modes offset 0x488 for 128 modes
[ 5.910270] [drm] qxl: 16M of VRAM memory size
[ 5.910270] [drm] qxl: 63M of IO pages memory ready (VRAM domain)
[ 5.910271] [drm] qxl: 64M of Surface memory size
[ 5.911518] [drm] main mem slot 1 [f4000000,3ffe000]
[ 5.911519] [drm] surface mem slot 2 [f8000000,4000000]
[ 5.911520] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.911520] [drm] No driver support for vblank timestamp query.
[ 5.911990] [drm] fb mappable at 0xF4000000, size 3145728
[ 5.911991] [drm] fb: depth 24, pitch 4096, width 1024, height 768
[ 5.912050] fbcon: qxldrmfb (fb0) is primary device
[ 5.934661] qxl 0000:00:02.0: fb0: qxldrmfb frame buffer device
[ 5.952354] [drm] Initialized qxl 0.1.0 20120117 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: 9.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-qxl depends on:
ii libc6 2.24-11
ii libudev1 232-25
ii xserver-xorg-core [xorg-video-abi-23] 2:1.19.2-1
xserver-xorg-video-qxl recommends no packages.
xserver-xorg-video-qxl suggests no packages.
-- no debconf information
