Package: hplip
Version: 3.16.11+repack0-3
Severity: normal
Dear Maintainer,
my MFP M125nw laser printer was perfectly working with Debian 8. After upgrading
to Debian 9 unstable (now stable), the printer is automatically detected and
everything seems to work, but nothing is printed. No obvious error message is
issued ("There was a problem", and after I kill the print, all I see is
"Printer state: Idle - rendering complete")
-- Package-specific info:
Saving output in log file: /home/giannozz/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 2-9.0 version is not supported. Using 2-8.6 versions dependencies to
verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.9.0-3-amd64 #1 SMP Debian 4.9.30-1 (2017-06-04) GNU/Linux
Host: pania
Proc: 4.9.0-3-amd64 #1 SMP Debian 4.9.30-1 (2017-06-04) GNU/Linux
Distribution: 2 9.0
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 2 distro
9.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.11
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/usb/HP_LaserJet_Pro_MFP_M125nw?serial=CNB7H5H5S4
[installation]
date_time = 06/17/17 16:28:26
version = 3.16.11
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
------------------------
| General Dependencies |
------------------------
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development
files REQUIRED 5.0.9 - MISSING
'libnetsnmp-devel needs to be installed'
python3-xml Python XML libraries
REQUIRED - 2.2.0 OK -
libpthread libpthread - POSIX threads library
REQUIRED - b'2.24' OK -
python3-reportlab Reportlab - PDF library for Python
OPTIONAL 2.0 3.3.0 OK -
sane SANE - Scanning library
REQUIRED - - OK -
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x)
REQUIRED 4.0 - MISSING 'python3-pyqt4
needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files
REQUIRED - - MISSING 'cups-devel needs
to be installed'
error: sane-devel SANE - Scanning library development files
REQUIRED - - MISSING 'sane-devel needs
to be installed'
python3X Python 2.2 or greater - Python programming language
REQUIRED 2.2 3.5.3 OK -
error: libjpeg libjpeg - JPEG library
REQUIRED - - MISSING 'libjpeg needs to
be installed'
python3-dbus Python DBus - Python bindings for DBus
REQUIRED 0.80.0 1.2.4 OK -
error: libcrypto libcrypto - OpenSSL cryptographic library
REQUIRED - 1.1.0 MISSING 'libcrypto needs
to be installed'
error: cups-image CUPS image - CUPS image development files
REQUIRED - - MISSING 'cups-image needs
to be installed'
error: libusb libusb - USB library
REQUIRED - 1.0 MISSING 'libusb needs to
be installed'
cups-ddk CUPS DDK - CUPS driver development kit
OPTIONAL - - OK -
error: python3-devel Python devel - Python development files
REQUIRED 2.2 3.5.3 MISSING 'python3-devel
needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4
OPTIONAL 4.0 - MISSING
'python3-pyqt4-dbus needs to be installed'
error: python3-notify2 Python libnotify - Python bindings for the libnotify
Desktop notifications OPTIONAL - - MISSING
'python3-notify2 needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline
scanning with hp-scan) OPTIONAL - 1.1.7 OK
-
-------------------------
| External Dependencies |
-------------------------
error: avahi-utils avahi-utils
OPTIONAL - - MISSING 'avahi-utils
needs to be installed'
network network -wget
OPTIONAL - 1.18 OK -
xsane xsane - Graphical scanner frontend for SANE
OPTIONAL 0.9 0.999 OK -
gs GhostScript - PostScript and PDF language interpreter and
previewer REQUIRED 7.05 9.20 OK -
error: cups CUPS - Common Unix Printing System
REQUIRED 1.1 - INCOMPAT 'CUPS may not be
installed or not running'
policykit PolicyKit - Administrative policy framework
OPTIONAL - 0.105 OK -
error: dbus DBus - Message bus system
REQUIRED - 1.10.18 MISSING 'DBUS may not be
installed or not running'
scanimage scanimage - Shell scanning program
OPTIONAL 1.0 1.0.25 OK -
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension
REQUIRED - 3.16.11 OK -
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend
REQUIRED - 3.16.11 OK 'hpaio found in
/etc/sane.d/dll.conf'
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension
REQUIRED - 3.16.11 OK -
cupsext CUPS-Extension
REQUIRED - 3.16.11 OK -
--------------
| COMPILEDEP |
--------------
make make - GNU make utility to maintain groups of programs
REQUIRED 3.0 4.1 OK -
error: libtool libtool - Library building support services
REQUIRED - - MISSING 'libtool needs to
be installed'
error: gcc gcc - GNU Project C and C++ Compiler
REQUIRED - 6.3.0 MISSING 'gcc needs to be
installed'
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-Pro-MFP-M125nw
--------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_Pro_MFP_M125nw?serial=CNB7H5H5S4
PPD: /etc/cups/ppd/HP-LaserJet-Pro-MFP-M125nw.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-Pro-MFP-M125nw.ppd ppd file
PPD Description:
Printer status: printer HP-LaserJet-Pro-MFP-M125nw disabled since Sat Jun 10
22:52:26 2017 -
Unplugged or turned off
error: Required plug-in status: Not installed
[31;01merror: Unable to communicate with device (code=12):
hp:/usb/HP_LaserJet_Pro_MFP_M125nw?serial=CNB7H5H5S4[0m
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libjpeg62-turbo-dev' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'libcupsimage2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
error: 'g++' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
error: 'python3-notify2' package is missing/incompatible
error: 'avahi-utils' package is missing/incompatible
Plug-in Status
--------------
error: Plug-ins need to be installed
Total Errors: 18
Total Warnings: 0
Done.
-- System Information:
Debian Release: 9.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages hplip depends on:
ii adduser 3.115
ii coreutils 8.26-3
ii cups 2.2.1-8
ii hplip-data 3.16.11+repack0-3
ii libc6 2.24-11
ii libcups2 2.2.1-8
ii libdbus-1-3 1.10.18-1
ii libhpmud0 3.16.11+repack0-3
ii libsane 1.0.25-4.1
ii libsane-hpaio 3.16.11+repack0-3
ii libsnmp30 5.7.3+dfsg-1.7
ii libusb-1.0-0 2:1.0.21-1
ii lsb-base 9.20161125
ii policykit-1 0.105-18
ii printer-driver-hpcups 3.16.11+repack0-3
ii python3 3.5.3-1
ii python3-dbus 1.2.4-1+b1
ii python3-gi 3.22.0-2
ii python3-pexpect 4.2.1-1
ii python3-pil 4.0.0-4
ii python3-reportlab 3.3.0-2
ii wget 1.18-5
Versions of packages hplip recommends:
ii avahi-daemon 0.6.32-2
ii printer-driver-postscript-hp 3.16.11+repack0-3
ii sane-utils 1.0.25-4.1
Versions of packages hplip suggests:
pn hplip-doc <none>
pn hplip-gui <none>
pn python3-notify2 <none>
ii system-config-printer 1.5.7-3
-- no debconf information
