Package: pulseaudio
Version: 10.0-1
Followup-For: Bug #864388
I have probably figured something out.
I have installed GNOME ALSA Mixer, since it reveals much more sound settings
than standard applet. I have tackled it for a while and found there some
channels signed for recording. I have muted all the recordings and the
distortion is gone.
The pitty thing is that I cannot figure out, which one it was. I attempted to
go up and down with faders and allow recording from channel to channel but the
distortion has not returned back. I even deleted the GNOME ALSA Mixer settings
from my profile, however the sound settings are probably stored also somewhere
else and have not returned to the defaults.
So, it would seem that there is some broken default in mixer settings for
Stretch that was correct before in Jessie. Now it's only difficult to say,
which one.
I have nothing connected to any input channel of soundcard, so there is no way
it could do something on output. The distortion only took place when playing
the sound file, not when there was no sound playing.
I just feel that it has been some strange, seemingly output channel marked for
recording (possibly some line out?), thus possibly returned by the mixer's
routing back to input, thus causing distortion of general output signal.
Is there a possibility to compare the default mixer settings in source code
from Jessie and Stretch, thus finding the difference? Or is there some other
way of knowing, what has changed since I saved new (and seemingly correct)
mixer settings?
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: 9.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=sk_SK.UTF-8, LC_CTYPE=sk_SK.UTF-8 (charmap=UTF-8),
LANGUAGE=sk_SK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.115
ii libasound2 1.1.3-5
ii libasound2-plugins 1.1.1-1
ii libc6 2.24-11
ii libcap2 1:2.25-1
ii libdbus-1-3 1.10.18-1
ii libgcc1 1:6.3.0-18
ii libice6 2:1.0.9-2
ii libltdl7 2.4.6-2
ii liborc-0.4-0 1:0.4.26-2
ii libpulse0 10.0-1
ii libsm6 2:1.2.2-1+b3
ii libsndfile1 1.0.27-3
ii libsoxr0 0.1.2-2
ii libspeexdsp1 1.2~rc1.2-1+b2
ii libstdc++6 6.3.0-18
ii libsystemd0 232-25
ii libtdb1 1.3.11-2
ii libudev1 232-25
ii libwebrtc-audio-processing1 0.3-1
ii libx11-6 2:1.6.4-3
ii libx11-xcb1 2:1.6.4-3
ii libxcb1 1.12-1
ii libxtst6 2:1.2.3-1
ii lsb-base 9.20161125
ii pulseaudio-utils 10.0-1
Versions of packages pulseaudio recommends:
ii rtkit 0.11-4+b1
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
pn pavucontrol <none>
pn pavumeter <none>
ii udev 232-25
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; lfe-crossover-freq = 0
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=Live
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Default Audio Device
front:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Front speakers
rear:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Rear speakers
center_lfe:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Center and Subwoofer speakers
surround21:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
4.0 Surround output to Front and Rear speakers
surround41:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
iec958:CARD=Live,DEV=0
SB Live! Value [CT4670], Multichannel Capture/PT Playback
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Direct sample mixing device
dmix:CARD=Live,DEV=2
SB Live! Value [CT4670], Multichannel Capture/PT Playback
Direct sample mixing device
dmix:CARD=Live,DEV=3
SB Live! Value [CT4670], Multichannel Playback
Direct sample mixing device
dsnoop:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Direct sample snooping device
dsnoop:CARD=Live,DEV=2
SB Live! Value [CT4670], Multichannel Capture/PT Playback
Direct sample snooping device
dsnoop:CARD=Live,DEV=3
SB Live! Value [CT4670], Multichannel Playback
Direct sample snooping device
hw:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Direct hardware device without any conversions
hw:CARD=Live,DEV=2
SB Live! Value [CT4670], Multichannel Capture/PT Playback
Direct hardware device without any conversions
hw:CARD=Live,DEV=3
SB Live! Value [CT4670], Multichannel Playback
Direct hardware device without any conversions
plughw:CARD=Live,DEV=0
SB Live! Value [CT4670], ADC Capture/Standard PCM Playback
Hardware device with all software conversions
plughw:CARD=Live,DEV=2
SB Live! Value [CT4670], Multichannel Capture/PT Playback
Hardware device with all software conversions
plughw:CARD=Live,DEV=3
SB Live! Value [CT4670], Multichannel Playback
Hardware device with all software conversions
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 0
Hardware device with all software conversions
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "10.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "10.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "10.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "10.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "10.0"
Module #6
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_00_01.1"
card_name="alsa_card.pci-0000_00_01.1" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "10.0"
Module #7
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_03_06.0"
card_name="alsa_card.pci-0000_03_06.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "10.0"
Module #8
Name: module-jackdbus-detect
Argument: channels=2
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Adds JACK sink/source ports when JACK is
started"
module.version = "10.0"
Module #9
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth
devices out-of-the-box easier"
module.version = "10.0"
Module #10
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and
load the corresponding discovery module"
module.version = "10.0"
Module #11
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio
devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "10.0"
Module #12
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "10.0"
Module #13
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "10.0"
Module #14
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "10.0"
Module #15
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "10.0"
Module #16
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "10.0"
Module #17
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "10.0"
Module #18
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "10.0"
Module #19
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "10.0"
Module #20
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "10.0"
Module #21
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "10.0"
Module #22
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "10.0"
Module #23
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "10.0"
Module #27
Name: module-x11-publish
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "10.0"
Module #28
Name: module-x11-cork-request
Argument: display=:0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "10.0"
Module #29
Name: module-x11-xsmp
Argument: display=:0
session_manager=local/blacktux:@/tmp/.ICE-unix/25562,unix/blacktux:/tmp/.ICE-unix/25562
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "10.0"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_03_06.0.analog-stereo
Description: EMU10k1 [Sound Blaster Live! Series] (CT4670/4850 SBLive!
Value) Analógový stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 15635 / 24% / -37.34 dB, front-right: 15635 /
24% / -37.34 dB
balance 0.00
Base Volume: 41350 / 63% / -12.00 dB
Monitor Source: alsa_output.pci-0000_03_06.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ADC Capture/Standard PCM Playback"
alsa.id = "emu10k1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "SB Live! Value [CT4670]"
alsa.long_card_name = "SB Live! Value [CT4670] (rev.4,
serial:0x201102) at 0xd000, irq 20"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:03:06.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0002"
device.product.name = "EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value)"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "65536"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analógový stereo"
device.description = "EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value) Analógový stereo"
alsa.mixer_name = "TriTech TR28023"
alsa.components = "AC97a:54524103"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output: Analógový výstup (priority: 9900)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_03_06.0.analog-stereo.monitor
Description: Monitor of EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value) Analógový stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_03_06.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of EMU10k1 [Sound Blaster Live!
Series] (CT4670/4850 SBLive! Value) Analógový stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "SB Live! Value [CT4670]"
alsa.long_card_name = "SB Live! Value [CT4670] (rev.4,
serial:0x201102) at 0xd000, irq 20"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:03:06.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0002"
device.product.name = "EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value)"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_03_06.0.analog-stereo
Description: EMU10k1 [Sound Blaster Live! Series] (CT4670/4850 SBLive!
Value) Analógový stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: yes
Volume: front-left: 27636 / 42% / -22.50 dB, front-right: 27636 /
42% / -22.50 dB
balance 0.00
Base Volume: 27636 / 42% / -22.50 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ADC Capture/Standard PCM Playback"
alsa.id = "emu10k1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "SB Live! Value [CT4670]"
alsa.long_card_name = "SB Live! Value [CT4670] (rev.4,
serial:0x201102) at 0xd000, irq 20"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:03:06.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0002"
device.product.name = "EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value)"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analógový stereo"
device.description = "EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value) Analógový stereo"
alsa.mixer_name = "TriTech TR28023"
alsa.components = "AC97a:54524103"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-mic;input-microphone-1: Mikrofón / Mikrofón 1
(priority: 8720)
analog-input-mic;input-microphone-2: Mikrofón / Mikrofón 2
(priority: 8719)
analog-input-linein: Vstupná linka (priority: 8100)
analog-input-aux: Analógový vstup (priority: 8000)
analog-input-video: Video (priority: 7000)
Active Port: analog-input-mic;input-microphone-1
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 19
Properties:
application.name = "Login Session 3"
systemd-login.session = "3"
Client #50
Driver: module-systemd-login.c
Owner Module: 19
Properties:
application.name = "Login Session 526"
systemd-login.session = "526"
Client #51
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "sk_SK.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "25597"
application.process.user = "peto"
application.process.host = "blacktux"
application.process.binary = "gnome-shell"
application.process.machine_id =
"ee9a6958a21e45559b7b93fd2517f665"
application.process.session_id = "526"
Client #52
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.22.3"
application.process.id = "25597"
application.process.user = "peto"
application.process.host = "blacktux"
application.process.binary = "gnome-shell"
application.language = "sk_SK.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"ee9a6958a21e45559b7b93fd2517f665"
application.process.session_id = "526"
Client #56
Driver: module-x11-xsmp.c
Owner Module: 29
Properties:
application.name = "XSMP Session on gnome-session as
109b18f0f8b88220514968928248049400000255620027"
xsmp.vendor = "gnome-session"
xsmp.client.id =
"109b18f0f8b88220514968928248049400000255620027"
Client #57
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.22.2"
application.process.id = "25621"
application.process.user = "peto"
application.process.host = "blacktux"
application.process.binary = "gnome-settings-daemon"
application.language = "sk_SK.UTF-8"
window.x11.display = ":0"
application.process.machine_id =
"ee9a6958a21e45559b7b93fd2517f665"
application.process.session_id = "526"
Client #62
Driver: protocol-native.c
Owner Module: 12
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.process.id = "25884"
application.process.user = "peto"
application.process.host = "blacktux"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id =
"ee9a6958a21e45559b7b93fd2517f665"
application.process.session_id = "526"
Sample #0
Name: bell-window-system
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Volume: (invalid)
balance 0.00
Duration: 0.1s
Size: 24.0 KiB
Lazy: no
Filename: n/a
Properties:
media.role = "event"
application.process.id = "2513"
application.name = "reportbug"
event.description = "Udalosť zvončeka"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename =
"/usr/share//sounds/freedesktop/stereo/bell.oga"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "32"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "sk_SK.UTF-8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "peto"
application.process.host = "blacktux"
application.process.binary = "gnome-shell"
application.process.machine_id =
"ee9a6958a21e45559b7b93fd2517f665"
application.process.session_id = "5"
Card #0
Name: alsa_card.pci-0000_00_01.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfeb60000 irq 55"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:01.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1308"
device.product.name = "Kaveri HDMI/DP Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Vstavaný zvuk"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) výstup (sinks: 1,
sources: 0, priority: 5400, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) výstup
(sinks: 1, sources: 0, priority: 300, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) výstup
(sinks: 1, sources: 0, priority: 300, available: no)
off: Vypnuté (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo,
output:hdmi-surround, output:hdmi-surround71
Card #1
Name: alsa_card.pci-0000_03_06.0
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "0"
alsa.card_name = "SB Live! Value [CT4670]"
alsa.long_card_name = "SB Live! Value [CT4670] (rev.4,
serial:0x201102) at 0xd000, irq 20"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:03:06.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.4/0000:03:06.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0002"
device.product.name = "EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value)"
device.string = "0"
device.description = "EMU10k1 [Sound Blaster Live! Series]
(CT4670/4850 SBLive! Value)"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-mono: Analógový mono vstup (sinks: 0, sources: 1,
priority: 2, available: yes)
input:analog-stereo: Analógový stereo vstup (sinks: 0, sources:
1, priority: 60, available: yes)
output:analog-mono: Analógový mono výstup (sinks: 1, sources:
0, priority: 200, available: yes)
output:analog-mono+input:analog-mono: Obojsmerný analógový mono
(sinks: 1, sources: 1, priority: 202, available: yes)
output:analog-mono+input:analog-stereo: Analógový mono výstup +
Analógový stereo vstup (sinks: 1, sources: 1, priority: 260, available: yes)
output:analog-stereo: Analógový stereo výstup (sinks: 1,
sources: 0, priority: 6000, available: yes)
output:analog-stereo+input:analog-mono: Analógový stereo výstup
+ Analógový mono vstup (sinks: 1, sources: 1, priority: 6002, available: yes)
output:analog-stereo+input:analog-stereo: Obojsmerný analógový
stereo (sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-21: Analógový priestorový 2.1 výstup
(sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-21+input:analog-mono: Analógový
priestorový 2.1 výstup + Analógový mono vstup (sinks: 1, sources: 1, priority:
802, available: yes)
output:analog-surround-21+input:analog-stereo: Analógový
priestorový 2.1 výstup + Analógový stereo vstup (sinks: 1, sources: 1,
priority: 860, available: yes)
output:analog-surround-40: Analógový priestorový 4.0 výstup
(sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-mono: Analógový
priestorový 4.0 výstup + Analógový mono vstup (sinks: 1, sources: 1, priority:
702, available: yes)
output:analog-surround-40+input:analog-stereo: Analógový
priestorový 4.0 výstup + Analógový stereo vstup (sinks: 1, sources: 1,
priority: 760, available: yes)
output:analog-surround-41: Analógový priestorový 4.1 výstup
(sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-mono: Analógový
priestorový 4.1 výstup + Analógový mono vstup (sinks: 1, sources: 1, priority:
802, available: yes)
output:analog-surround-41+input:analog-stereo: Analógový
priestorový 4.1 výstup + Analógový stereo vstup (sinks: 1, sources: 1,
priority: 860, available: yes)
output:analog-surround-50: Analógový priestorový 5.0 výstup
(sinks: 1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-mono: Analógový
priestorový 5.0 výstup + Analógový mono vstup (sinks: 1, sources: 1, priority:
702, available: yes)
output:analog-surround-50+input:analog-stereo: Analógový
priestorový 5.0 výstup + Analógový stereo vstup (sinks: 1, sources: 1,
priority: 760, available: yes)
output:analog-surround-51: Analógový priestorový 5.1 výstup
(sinks: 1, sources: 0, priority: 800, available: yes)
output:analog-surround-51+input:analog-mono: Analógový
priestorový 5.1 výstup + Analógový mono vstup (sinks: 1, sources: 1, priority:
802, available: yes)
output:analog-surround-51+input:analog-stereo: Analógový
priestorový 5.1 výstup + Analógový stereo vstup (sinks: 1, sources: 1,
priority: 860, available: yes)
output:iec958-stereo: Digitálne stereo (IEC958) výstup (sinks:
1, sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-mono: Digitálne stereo
(IEC958) výstup + Analógový mono vstup (sinks: 1, sources: 1, priority: 5502,
available: yes)
output:iec958-stereo+input:analog-stereo: Digitálne stereo
(IEC958) výstup + Analógový stereo vstup (sinks: 1, sources: 1, priority: 5560,
available: yes)
off: Vypnuté (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-mic;input-microphone-1: Mikrofón / Mikrofón 1
(priority: 8720, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono,
input:analog-stereo, output:analog-mono+input:analog-mono,
output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-mono,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-mono,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-mono,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-mono,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-mono,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
analog-input-mic;input-microphone-2: Mikrofón / Mikrofón 2
(priority: 8719, latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono,
input:analog-stereo, output:analog-mono+input:analog-mono,
output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-mono,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-mono,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-mono,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-mono,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-mono,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
analog-input-linein: Vstupná linka (priority: 8100, latency
offset: 0 usec)
Part of profile(s): input:analog-mono,
input:analog-stereo, output:analog-mono+input:analog-mono,
output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-mono,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-mono,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-mono,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-mono,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-mono,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
analog-input-aux: Analógový vstup (priority: 8000, latency
offset: 0 usec)
Part of profile(s): input:analog-mono,
input:analog-stereo, output:analog-mono+input:analog-mono,
output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-mono,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-mono,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-mono,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-mono,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-mono,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
analog-input-video: Video (priority: 7000, latency offset: 0
usec)
Part of profile(s): input:analog-mono,
input:analog-stereo, output:analog-mono+input:analog-mono,
output:analog-mono+input:analog-stereo, output:analog-stereo+input:analog-mono,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-mono,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-mono,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-mono,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-mono,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-mono,
output:analog-surround-51+input:analog-stereo,
output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
analog-output: Analógový výstup (priority: 9900, latency
offset: 0 usec)
Part of profile(s): output:analog-mono,
output:analog-mono+input:analog-mono, output:analog-mono+input:analog-stereo,
output:analog-stereo, output:analog-stereo+input:analog-mono,
output:analog-stereo+input:analog-stereo, output:analog-surround-21,
output:analog-surround-21+input:analog-mono,
output:analog-surround-21+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-mono,
output:analog-surround-40+input:analog-stereo, output:analog-surround-41,
output:analog-surround-41+input:analog-mono,
output:analog-surround-41+input:analog-stereo, output:analog-surround-50,
output:analog-surround-50+input:analog-mono,
output:analog-surround-50+input:analog-stereo, output:analog-surround-51,
output:analog-surround-51+input:analog-mono,
output:analog-surround-51+input:analog-stereo
iec958-stereo-output: Digitálny výstup (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:analog-mono, output:iec958-stereo+input:analog-stereo
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 63
Tile Size: 65472
User Name: peto
Host Name: blacktux
Server Name: pulseaudio
Server Version: 10.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_03_06.0.analog-stereo
Default Source: alsa_input.pci-0000_03_06.0.analog-stereo
Cookie: d6d2:292e
