Package: installation-reports
Severity: important
-- Package-specific info:
Boot method: netboot SD-card image
Image version:
http://ftp.nl.debian.org/debian/dists/testing/main/installer-armhf/current/images/netboot/SD-card-images/partition.img.gz
[20170407]
Date: 2017-05-18T22:00+01:00
Machine: BeagleBone Black
Partitions:
Disk /dev/mmcblk1: 3.6 GiB, 3825205248 bytes, 7471104 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0aa12372
Device Boot Start End Sectors Size Id Type
/dev/mmcblk1p1 * 2048 438271 436224 213M 83 Linux
/dev/mmcblk1p2 438272 6483967 6045696 2.9G 83 Linux
/dev/mmcblk1p3 6486014 7469055 983042 480M 5 Extended
/dev/mmcblk1p5 6486016 7469055 983040 480M 82 Linux swap / Solaris
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
I installed the system using a serial console from an Ubuntu 16.04 box
using picocom and GNOME Terminal. I also used this Ubuntu box for
downloading and manipulating boot images.
I assembled an image from parts in images/netboot/SD-card-images:
zcat firmware.BeagleBoneBlack.img.gz partition.img.gz | sudo sh -c 'cat >
/dev/sdc'
This failed to boot on my BeagleBone Black. Here is the console log:
--------8<--------
U-Boot SPL 2016.11+dfsg1-4 (Mar 27 2017 - 18:39:51)
Trying to boot from MMC1
MMC partition switch failed
*** Warning - MMC partition switch failed, using default environment
U-Boot 2016.11+dfsg1-4 (Mar 27 2017 - 18:39:51 +0000)
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - bad CRC, using default environment
<ethaddr> not set. Validating first E-fuse MAC
Net: cpsw
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
1575 bytes read in 6 ms (255.9 KiB/s)
Running bootscript from mmc0 ...
## Executing script at 82000000
Mainline u-boot / new-style environment detected.
This installer medium does not contain a suitable device-tree file for
this system (am335x-boneblack.dtb). Aborting boot process.
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
1575 bytes read in 7 ms (219.7 KiB/s)
## Executing script at 80000000
Mainline u-boot / new-style environment detected.
reading vmlinuz
** Unable to read file vmlinuz **
SCRIPT FAILED: continuing...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
1575 bytes read in 6 ms (255.9 KiB/s)
Running bootscript from mmc0 ...
## Executing script at 82000000
Mainline u-boot / new-style environment detected.
reading vmlinuz
** Unable to read file vmlinuz **
** Invalid partition 2 **
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
switch to partitions #0, OK
mmc1(part 0) is current device
SD/MMC found on device 1
switch to partitions #0, OK
mmc1(part 0) is current device
SD/MMC found on device 1
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
** Unable to read file uEnv.txt **
** File not found /boot/zImage **
## Error: "bootcmd_nand0" not defined
starting USB...
USB0: Port not available.
cpsw Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
-------->8--------
The critical line seems to be "** Unable to read file vmlinuz **".
Indeed, there's no file called "vmlinuz" on the SD card. I tried to copy
on the "vmlinuz" from images/netboot, but that failed:
bjh21@sole:/tmp/debian-stretch-rc3$ sudo cp vmlinuz /media/bjh21/EB55-8514/.
cp: error writing '/media/bjh21/EB55-8514/./vmlinuz': No space left on device
I deleted the partition from the SD card, created a bigger one, and
installed the contents of the partition image and the vmlinuz file
referenced above. This booted successfully.
The first question was a little odd, asking me to select a language for
the installation process, with a choice between "English" and "C". There
wasn't any clear explanation of what "C" meant.
Thereafter, everything went well until the reboot after installation.
First, the console started emitting "C" characters a few times per second,
which makes me think of XMODEM. Maybe I accidentally typed something at
the wrong moment while putting the MicroSD card away. Anyway, afterwards
the GNOME Terminal through which I was installing got stuck in the DEC
Graphics character set, requiring me to disconnect picocom and run "reset"
before I could get a useful display from the BeagleBone's console.
Other than those two problems, everything went very well, and the
installation experience was as smooth as on a PC.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="9 (stretch) - installer build 20170407"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
uname -a: Linux skagerrak 4.9.0-2-armmp #1 SMP Debian 4.9.18-1 (2017-03-30)
armv7l GNU/Linux
lsmod: Module Size Used by
lsmod: dm_mod 103345 0
lsmod: md_mod 120554 0
lsmod: jfs 174500 0
lsmod: btrfs 1144412 0
lsmod: xor 4718 1 btrfs
lsmod: zlib_deflate 20290 1 btrfs
lsmod: raid6_pq 87373 1 btrfs
lsmod: vfat 10313 0
lsmod: fat 57205 1 vfat
lsmod: ext4 551118 2
lsmod: crc16 1274 1 ext4
lsmod: jbd2 94046 1 ext4
lsmod: crc32c_generic 1862 3
lsmod: fscrypto 15747 1 ext4
lsmod: ecb 2191 0
lsmod: mbcache 5508 3 ext4
lsmod: usb_storage 45771 0
lsmod: scsi_mod 187963 1 usb_storage
lsmod: smsc 3309 0
lsmod: musb_dsps 9789 0
lsmod: musb_hdrc 113261 1 musb_dsps
lsmod: udc_core 26444 1 musb_hdrc
lsmod: davinci_mdio 4937 1
lsmod: usbcore 195888 2 usb_storage,musb_hdrc
lsmod: phy_am335x 2369 6
lsmod: phy_generic 4686 1 phy_am335x
lsmod: usb_common 3659 5
phy_am335x,udc_core,musb_hdrc,musb_dsps,usbcore
lsmod: phy_am335x_control 2510 1 phy_am335x
lsmod: ti_cpsw 28155 0
lsmod: cpsw_ale 7511 1 ti_cpsw
lsmod: cpsw_common 1689 1 ti_cpsw
lsmod: davinci_cpdma 9069 1 ti_cpsw
lsmod: omap_hsmmc 20367 0
lsmod: musb_am335x 1287 0
lsmod: leds_gpio 3390 0
df: Filesystem 1K-blocks Used Available Use% Mounted on
df: none 50544 52 50492 0% /run
df: devtmpfs 233600 0 233600 0% /dev
df: /dev/mmcblk1p2 2909840 649132 2093184 24% /target
df: /dev/mmcblk1p1 211212 24723 175584 12% /target/boot
df: /dev/mmcblk1p2 2909840 649132 2093184 24% /dev/.static/dev
df: devtmpfs 233600 0 233600 0% /target/dev
free: total used free shared buffers
free: Mem: 505428 335716 169712 87344 39384
free: -/+ buffers: 296332 209096
free: Swap: 491516 8068 483448
/proc/cmdline: console=ttyO0,115200n8
/proc/cpuinfo: processor : 0
/proc/cpuinfo: model name : ARMv7 Processor rev 2 (v7l)
/proc/cpuinfo: BogoMIPS : 997.78
/proc/cpuinfo: Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32
/proc/cpuinfo: CPU implementer : 0x41
/proc/cpuinfo: CPU architecture: 7
/proc/cpuinfo: CPU variant : 0x3
/proc/cpuinfo: CPU part : 0xc08
/proc/cpuinfo: CPU revision : 2
/proc/cpuinfo:
/proc/cpuinfo: Hardware : Generic AM33XX (Flattened Device Tree)
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/device-tree/model: TI AM335x BeagleBone Black0483ff : /ocp/timer@48048000
/proc/iomem: 4804a000-4804a3ff : /ocp/timer@4804a000
/proc/iomem: 4804c000-4804cfff : /ocp/gpio@4804c000
/proc/iomem: 48060000-48060fff : /ocp/mmc@48060000
/proc/iomem: 480c8000-480c81ff : /ocp/mailbox@480C8000
/proc/iomem: 4819c000-4819cfff : /ocp/i2c@4819c000
/proc/iomem: 481ac000-481acfff : /ocp/gpio@481ac000
/proc/iomem: 481ae000-481aefff : /ocp/gpio@481ae000
/proc/iomem: 481d8000-481d8fff : /ocp/mmc@481d8000
/proc/iomem: 49000000-4900ffff : edma3_cc
/proc/iomem: 4a100000-4a1007ff : /ocp/ethernet@4a100000
/proc/iomem: 4a101000-4a1010ff : /ocp/ethernet@4a100000/mdio@4a101000
/proc/iomem: 4a101200-4a1012ff : /ocp/ethernet@4a100000
/proc/iomem: 80000000-9fdfffff : System RAM
/proc/iomem: 80008000-80afffff : Kernel code
/proc/iomem: 80c00000-80d42dc3 : Kernel data
/proc/interrupts: CPU0
/proc/interrupts: 16: 276647 INTC 68 Level gp_timer
/proc/interrupts: 20: 61601 INTC 12 Level 49000000.edma_ccint
/proc/interrupts: 22: 4497 INTC 14 Level 49000000.edma_ccerrint
/proc/interrupts: 26: 1 INTC 96 Level 44e07000.gpio
/proc/interrupts: 33: 1 44e07000.gpio 6 Edge 48060000.mmc cd
/proc/interrupts: 59: 0 INTC 98 Level 4804c000.gpio
/proc/interrupts: 92: 0 INTC 32 Level 481ac000.gpio
/proc/interrupts: 125: 0 INTC 62 Level 481ae000.gpio
/proc/interrupts: 158: 19436 INTC 72 Level OMAP UART0
/proc/interrupts: 159: 0 INTC 70 Level 44e0b000.i2c
/proc/interrupts: 160: 0 INTC 30 Level 4819c000.i2c
/proc/interrupts: 161: 1001 INTC 64 Level mmc0
/proc/interrupts: 162: 252514 INTC 28 Level mmc1
/proc/interrupts: 170: 0 INTC 75 Level rtc0
/proc/interrupts: 171: 1 INTC 76 Level rtc0
/proc/interrupts: 173: 197484 INTC 41 Level 4a100000.ethernet
/proc/interrupts: 174: 48362 INTC 42 Level 4a100000.ethernet
/proc/interrupts: IPI0: 0 CPU wakeup interrupts
/proc/interrupts: IPI1: 0 Timer broadcast interrupts
/proc/interrupts: IPI2: 0 Rescheduling interrupts
/proc/interrupts: IPI3: 0 Function call interrupts
/proc/interrupts: IPI4: 0 CPU stop interrupts
/proc/interrupts: IPI5: 0 IRQ work interrupts
/proc/interrupts: IPI6: 0 completion interrupts
/proc/interrupts: Err: 0
/proc/meminfo: MemTotal: 505428 kB
/proc/meminfo: MemFree: 169712 kB
/proc/meminfo: MemAvailable: 372688 kB
/proc/meminfo: Buffers: 39384 kB
/proc/meminfo: Cached: 229252 kB
/proc/meminfo: SwapCached: 512 kB
/proc/meminfo: Active: 119960 kB
/proc/meminfo: Inactive: 167496 kB
/proc/meminfo: Active(anon): 11324 kB
/proc/meminfo: Inactive(anon): 94844 kB
/proc/meminfo: Active(file): 108636 kB
/proc/meminfo: Inactive(file): 72652 kB
/proc/meminfo: Unevictable: 0 kB
/proc/meminfo: Mlocked: 0 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 505428 kB
/proc/meminfo: LowFree: 169712 kB
/proc/meminfo: SwapTotal: 491516 kB
/proc/meminfo: SwapFree: 483448 kB
/proc/meminfo: Dirty: 752 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 18316 kB
/proc/meminfo: Mapped: 4164 kB
/proc/meminfo: Shmem: 87344 kB
/proc/meminfo: Slab: 39284 kB
/proc/meminfo: SReclaimable: 33116 kB
/proc/meminfo: SUnreclaim: 6168 kB
/proc/meminfo: KernelStack: 600 kB
/proc/meminfo: PageTables: 496 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 744228 kB
/proc/meminfo: Committed_AS: 119224 kB
/proc/meminfo: VmallocTotal: 507904 kB
/proc/meminfo: VmallocUsed: 0 kB
/proc/meminfo: VmallocChunk: 0 kB
/proc/meminfo: CmaTotal: 16384 kB
/proc/meminfo: CmaFree: 13784 kB
-- System Information:
Debian Release: 9.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: armhf
(armv7l)
Kernel: Linux 4.9.0-3-armmp (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
