Package: udev
Version: 0.084-3
Severity: normal
hi,
i can not say for sure that this is an udev bug, but i am kind of exasperated.
The first time i plug an UMS device into my computer the syslog
following messages:
Feb 6 22:28:24 obi kernel: usb 1-1: new high speed USB device using ehci_hcd
and address 6
Feb 6 22:28:31 obi kernel: usb 1-1: unable to read config index 0
descriptor/start
Feb 6 22:28:31 obi kernel: usb 1-1: can't read configurations, error -110
Feb 6 22:28:31 obi kernel: usb 1-1: new high speed USB device using ehci_hcd
and address 7
Feb 6 22:28:31 obi kernel: usb-storage: USB Mass Storage device detected
Feb 6 22:28:31 obi kernel: usb-storage: -- associate_dev
Feb 6 22:28:31 obi kernel: usb-storage: Vendor: 0x0781, Product: 0x5150,
Revision: 0x0020
Feb 6 22:28:31 obi kernel: usb-storage: Interface Subclass: 0x06, Protocol:
0x50
Feb 6 22:28:31 obi kernel: usb-storage: Transport: Bulk
Feb 6 22:28:31 obi kernel: usb-storage: Protocol: Transparent SCSI
Feb 6 22:28:31 obi kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Feb 6 22:28:31 obi kernel: usb-storage: *** thread sleeping.
Feb 6 22:28:31 obi kernel: usb-storage: device found at 7
Feb 6 22:28:31 obi kernel: usb-storage: waiting for device to settle before
scanning
Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1
value=0000 index=00 len=1
Feb 6 22:28:36 obi kernel: usb-storage: GetMaxLUN command result is 1, data is 0
Feb 6 22:28:36 obi kernel: usb-storage: queuecommand called
Feb 6 22:28:36 obi kernel: usb-storage: *** thread awakened.
Feb 6 22:28:36 obi kernel: usb-storage: Command INQUIRY (6 bytes)
Feb 6 22:28:36 obi kernel: usb-storage: 12 00 00 00 24 00
Feb 6 22:28:36 obi kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F
128 Trg 0 LUN 0 CL 6
Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31
bytes
Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 31/31
Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb 6 22:28:36 obi kernel: usb-storage: Bulk command transfer result=0
Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 36
bytes, 1 entries
Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 36/36
Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb 6 22:28:36 obi kernel: usb-storage: Bulk data transfer result 0x0
Feb 6 22:28:36 obi kernel: usb-storage: Attempting to get CSW...
Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13
bytes
Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 13/13
Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb 6 22:28:36 obi kernel: usb-storage: Bulk status result = 0
Feb 6 22:28:36 obi kernel: usb-storage: Bulk Status S 0x53425355 T 0x1 R 0
Stat 0x0
Feb 6 22:28:36 obi kernel: usb-storage: scsi cmd done, result=0x0
Feb 6 22:28:36 obi kernel: usb-storage: *** thread sleeping.
Feb 6 22:28:36 obi kernel: Vendor: SanDisk Model: Cruzer Mini Rev:
0.2
Feb 6 22:28:36 obi kernel: Type: Direct-Access ANSI
SCSI revision: 02
Feb 6 22:28:36 obi kernel: usb-storage: queuecommand called
Feb 6 22:28:36 obi kernel: usb-storage: *** thread awakened.
Feb 6 22:28:36 obi kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 6 22:28:36 obi kernel: usb-storage: 00 00 00 00 00 00
Feb 6 22:28:36 obi kernel: usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F
0 Trg 0 LUN 0 CL 6
Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31
bytes
Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 31/31
Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete
Feb 6 22:28:36 obi kernel: usb-storage: Bulk command transfer result=0
Feb 6 22:28:36 obi kernel: usb-storage: Attempting to get CSW...
Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13
bytes
Feb 6 22:28:39 obi udevd-event[6258]: wait_for_sysfs: waiting for
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/bus'
failed
Feb 6 22:28:43 obi udevd-event[6258]: wait_for_sysfs: waiting for
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/ioerr_cnt'
failed
Feb 6 22:29:06 obi kernel: usb-storage: command_abort called
Feb 6 22:29:06 obi kernel: usb-storage: usb_stor_stop_transport called
Feb 6 22:29:06 obi kernel: usb-storage: -- cancelling URB
Feb 6 22:29:06 obi kernel: usb-storage: Status code -104; transferred 0/13
Feb 6 22:29:06 obi kernel: usb-storage: -- transfer cancelled
Feb 6 22:29:06 obi kernel: usb-storage: Bulk status result = 4
Feb 6 22:29:06 obi kernel: usb-storage: -- command was aborted
Feb 6 22:29:06 obi kernel: usb 1-1: reset high speed USB device using ehci_hcd
and address 7
USB Controller:
0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller
(rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at d5001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller
(rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] #0a [2098]
Capabilities: [80] Power Management version 2
In case the bug does not belong here please forward it to the right
place or give me a hint, whom i could ask to get rid of this nasty bug:)
Your Jan
-- Package-specific info:
-- /etc/udev/rules.d/:
/etc/udev/rules.d/:
total 0
lrwxrwxrwx 1 root root 20 2006-01-17 17:51 020_permissions.rules ->
../permissions.rules
lrwxrwxrwx 1 root root 22 2006-01-17 19:15 025_logitechmouse.rules ->
../logitechmouse.rules
lrwxrwxrwx 1 root root 19 2006-01-17 17:51 cd-aliases.rules ->
../cd-aliases.rules
lrwxrwxrwx 1 root root 13 2006-01-17 17:51 udev.rules -> ../udev.rules
lrwxrwxrwx 1 root root 19 2006-01-17 17:51 z20_persistent.rules ->
../persistent.rules
lrwxrwxrwx 1 root root 12 2006-01-17 17:51 z50_run.rules -> ../run.rules
lrwxrwxrwx 1 root root 16 2006-01-17 17:51 z55_hotplug.rules -> ../hotplug.rules
lrwxrwxrwx 1 root root 19 2006-01-17 19:45 z60_alsa-utils.rules ->
../alsa-utils.rules
lrwxrwxrwx 1 root root 15 2006-01-17 22:24 z60_hdparm.rules -> ../hdparm.rules
lrwxrwxrwx 1 root root 17 2006-01-17 17:51 z70_hotplugd.rules ->
../hotplugd.rules
-- /sys/:
/sys/block/hda/dev
/sys/block/hda/hda1/dev
/sys/block/hdb/dev
/sys/block/hdb/hdb1/dev
/sys/block/hdb/hdb3/dev
/sys/block/hdb/hdb4/dev
/sys/block/hdc/dev
/sys/block/hdd/dev
/sys/block/loop0/dev
/sys/block/loop1/dev
/sys/block/loop2/dev
/sys/block/loop3/dev
/sys/block/loop4/dev
/sys/block/loop5/dev
/sys/block/loop6/dev
/sys/block/loop7/dev
/sys/block/nbd0/dev
/sys/block/nbd1/dev
/sys/block/nbd10/dev
/sys/block/nbd11/dev
/sys/block/nbd12/dev
/sys/block/nbd13/dev
/sys/block/nbd14/dev
/sys/block/nbd15/dev
/sys/block/nbd2/dev
/sys/block/nbd3/dev
/sys/block/nbd4/dev
/sys/block/nbd5/dev
/sys/block/nbd6/dev
/sys/block/nbd7/dev
/sys/block/nbd8/dev
/sys/block/nbd9/dev
/sys/block/ram0/dev
/sys/block/ram1/dev
/sys/block/ram10/dev
/sys/block/ram11/dev
/sys/block/ram12/dev
/sys/block/ram13/dev
/sys/block/ram14/dev
/sys/block/ram15/dev
/sys/block/ram2/dev
/sys/block/ram3/dev
/sys/block/ram4/dev
/sys/block/ram5/dev
/sys/block/ram6/dev
/sys/block/ram7/dev
/sys/block/ram8/dev
/sys/block/ram9/dev
/sys/block/sda/dev
/sys/block/sda/sda1/dev
/sys/block/sda/sda10/dev
/sys/block/sda/sda2/dev
/sys/block/sda/sda3/dev
/sys/block/sda/sda4/dev
/sys/block/sda/sda5/dev
/sys/block/sda/sda6/dev
/sys/block/sda/sda7/dev
/sys/block/sda/sda8/dev
/sys/block/sda/sda9/dev
/sys/block/sdb/dev
/sys/block/sdb/sdb1/dev
/sys/block/sdb/sdb2/dev
/sys/block/sdb/sdb3/dev
/sys/class/cpuid/cpu0/dev
/sys/class/graphics/fb0/dev
/sys/class/graphics/fb1/dev
/sys/class/graphics/fb2/dev
/sys/class/i2c-dev/i2c-0/dev
/sys/class/i2c-dev/i2c-1/dev
/sys/class/input/input0/event0/dev
/sys/class/input/input0/mouse0/dev
/sys/class/input/input1/event1/dev
/sys/class/input/input1/js0/dev
/sys/class/input/input2/event2/dev
/sys/class/input/mice/dev
/sys/class/misc/dac960_gam/dev
/sys/class/misc/device-mapper/dev
/sys/class/misc/mcelog/dev
/sys/class/misc/nvram/dev
/sys/class/misc/pktcdvd/dev
/sys/class/misc/psaux/dev
/sys/class/misc/rtc/dev
/sys/class/misc/tun/dev
/sys/class/msr/msr0/dev
/sys/class/ppdev/parport0/dev
/sys/class/ppp/ppp/dev
/sys/class/printer/lp0/dev
/sys/class/scsi_generic/sg0/dev
/sys/class/scsi_generic/sg1/dev
/sys/class/sound/admmidi/dev
/sys/class/sound/adsp/dev
/sys/class/sound/amidi/dev
/sys/class/sound/audio/dev
/sys/class/sound/controlC0/dev
/sys/class/sound/dmmidi/dev
/sys/class/sound/dsp/dev
/sys/class/sound/hwC0D0/dev
/sys/class/sound/hwC0D2/dev
/sys/class/sound/midi/dev
/sys/class/sound/midiC0D0/dev
/sys/class/sound/midiC0D1/dev
/sys/class/sound/midiC0D2/dev
/sys/class/sound/midiC0D3/dev
/sys/class/sound/mixer/dev
/sys/class/sound/pcmC0D0c/dev
/sys/class/sound/pcmC0D0p/dev
/sys/class/sound/pcmC0D1c/dev
/sys/class/sound/pcmC0D2c/dev
/sys/class/sound/pcmC0D2p/dev
/sys/class/sound/pcmC0D3p/dev
/sys/class/sound/seq/dev
/sys/class/sound/sequencer/dev
/sys/class/sound/sequencer2/dev
/sys/class/sound/timer/dev
/sys/class/usb/lp0/dev
/sys/class/usb_device/usbdev1.1/dev
/sys/class/usb_device/usbdev1.7/dev
/sys/class/usb_device/usbdev2.1/dev
/sys/class/usb_device/usbdev2.2/dev
/sys/class/usb_device/usbdev2.3/dev
/sys/class/usb_device/usbdev2.4/dev
/sys/class/usb_device/usbdev2.5/dev
-- Kernel configuration:
isapnp_init not present.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15.2obi-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Versions of packages udev depends on:
ii initscripts 2.86.ds1-11 Scripts for initializing and shutt
ii libc6 2.3.5-12.1 GNU C Library: Shared libraries an
ii libselinux1 1.28-3 SELinux shared libraries
ii lsb-base 3.0-15 Linux Standard Base 3.0 init scrip
ii makedev 2.3.1-80 creates device files in /dev
ii sed 4.1.4-5 The GNU sed stream editor
udev recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
