Package: pulseaudio Version: 10.0-1 Severity: minor I never noticed pulseaudio explicitly on my system, especially I did not configure anything.
Since updating to 10.0-1 I see the following (new) error messages in my logs: [pulseaudio] main.c: Hintergrunddienst konnte nicht initialisiert werden. [pulseaudio] main.c: Start des Hintergrunddienstes fehlgeschlagen. A rough english translation would be: [pulseaudio] main.c: Background service could not be initialized [pulseaudio] main.c: Start of the background service failed. All audio output so far seem to be fine, however, so this message is harmless? -- Package-specific info: File '/etc/default/pulseaudio' does not exist -- System Information: Debian Release: 9.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.8.15samd.01-grsec (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages pulseaudio depends on: ii adduser 3.115 ii libasound2 1.1.3-4 ii libasound2-plugins 1.1.1-1 ii libc6 2.24-9 ii libcap2 1:2.25-1 ii libdbus-1-3 1.10.14-1 ii libgcc1 1:6.3.0-5 ii libice6 2:1.0.9-1+b1 ii libltdl7 2.4.6-2 ii liborc-0.4-0 1:0.4.26-2 ii libpulse0 10.0-1 ii libsm6 2:1.2.2-1+b1 ii libsndfile1 1.0.27-1 ii libsoxr0 0.1.2-2 ii libspeexdsp1 1.2~rc1.2-1 ii libstdc++6 6.3.0-5 ii libsystemd0 232-15 ii libtdb1 1.3.11-2 ii libudev1 232-15 ii libwebrtc-audio-processing1 0.3-1 ii libx11-6 2:1.6.4-3 ii libx11-xcb1 2:1.6.4-3 ii libxcb1 1.12-1 ii libxtst6 2:1.2.3-1 ii lsb-base 9.20161125 ii pulseaudio-utils 10.0-1 Versions of packages pulseaudio recommends: ii rtkit 0.11-4 Versions of packages pulseaudio suggests: pn paman <none> pn paprefs <none> pn pavucontrol <none> pn pavumeter <none> ii udev 232-15 -- no debconf information --===============0500960700539247151== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="client.conf" # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no --===============0500960700539247151== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="daemon.conf" # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; enable-memfd = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 ; resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no ; lfe-crossover-freq = 0 ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 200000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0 --===============0500960700539247151== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="default.pa" #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) .fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect .endif ### Automatically connect sink and source if JACK server is present .ifexists module-jackdbus-detect.so .nofail load-module module-jackdbus-detect channels=2 .fail .endif ### Automatically load driver modules for Bluetooth hardware .ifexists module-bluetooth-policy.so load-module module-bluetooth-policy .endif .ifexists module-bluetooth-discover.so load-module module-bluetooth-discover .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. .ifexists module-gconf.so .nofail load-module module-gconf .fail .endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. .ifexists module-console-kit.so load-module module-console-kit .endif .ifexists module-systemd-login.so load-module module-systemd-login .endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply ### Make some devices default #set-default-sink output #set-default-source input --===============0500960700539247151== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="system.pa" #!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically load driver modules depending on the hardware available .ifexists module-udev-detect.so load-module module-udev-detect .else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect .endif ### Load several protocols .ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix .endif load-module module-native-protocol-unix ### Automatically restore the volume of streams and devices load-module module-stream-restore load-module module-device-restore ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds --===============0500960700539247151== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="bug-pulseaudio-aplay_-L.GcYq5U" null Discard all samples (playback) or generate zero samples (capture) default:CARD=SB HDA ATI SB, ALC887-VD Analog Default Audio Device sysdefault:CARD=SB HDA ATI SB, ALC887-VD Analog Default Audio Device front:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog Front speakers surround21:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Digital IEC958 (S/PDIF) Digital Audio Output dmix:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog Direct sample mixing device dmix:CARD=SB,DEV=1 HDA ATI SB, ALC887-VD Digital Direct sample mixing device dsnoop:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog Direct sample snooping device dsnoop:CARD=SB,DEV=1 HDA ATI SB, ALC887-VD Digital Direct sample snooping device hw:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog Direct hardware device without any conversions hw:CARD=SB,DEV=1 HDA ATI SB, ALC887-VD Digital Direct hardware device without any conversions plughw:CARD=SB,DEV=0 HDA ATI SB, ALC887-VD Analog Hardware device with all software conversions plughw:CARD=SB,DEV=1 HDA ATI SB, ALC887-VD Digital Hardware device with all software conversions hdmi:CARD=HDMI,DEV=0 HDA ATI HDMI, HDMI 0 HDMI Audio Output hdmi:CARD=HDMI,DEV=1 HDA ATI HDMI, HDMI 1 HDMI Audio Output hdmi:CARD=HDMI,DEV=2 HDA ATI HDMI, HDMI 2 HDMI Audio Output hdmi:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 3 HDMI Audio Output hdmi:CARD=HDMI,DEV=4 HDA ATI HDMI, HDMI 4 HDMI Audio Output hdmi:CARD=HDMI,DEV=5 HDA ATI HDMI, HDMI 5 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Direct sample mixing device dmix:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Direct sample mixing device dmix:CARD=HDMI,DEV=8 HDA ATI HDMI, HDMI 2 Direct sample mixing device dmix:CARD=HDMI,DEV=9 HDA ATI HDMI, HDMI 3 Direct sample mixing device dmix:CARD=HDMI,DEV=10 HDA ATI HDMI, HDMI 4 Direct sample mixing device dmix:CARD=HDMI,DEV=11 HDA ATI HDMI, HDMI 5 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Direct sample snooping device dsnoop:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Direct sample snooping device dsnoop:CARD=HDMI,DEV=8 HDA ATI HDMI, HDMI 2 Direct sample snooping device dsnoop:CARD=HDMI,DEV=9 HDA ATI HDMI, HDMI 3 Direct sample snooping device dsnoop:CARD=HDMI,DEV=10 HDA ATI HDMI, HDMI 4 Direct sample snooping device dsnoop:CARD=HDMI,DEV=11 HDA ATI HDMI, HDMI 5 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Direct hardware device without any conversions hw:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Direct hardware device without any conversions hw:CARD=HDMI,DEV=8 HDA ATI HDMI, HDMI 2 Direct hardware device without any conversions hw:CARD=HDMI,DEV=9 HDA ATI HDMI, HDMI 3 Direct hardware device without any conversions hw:CARD=HDMI,DEV=10 HDA ATI HDMI, HDMI 4 Direct hardware device without any conversions hw:CARD=HDMI,DEV=11 HDA ATI HDMI, HDMI 5 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA ATI HDMI, HDMI 0 Hardware device with all software conversions plughw:CARD=HDMI,DEV=7 HDA ATI HDMI, HDMI 1 Hardware device with all software conversions plughw:CARD=HDMI,DEV=8 HDA ATI HDMI, HDMI 2 Hardware device with all software conversions plughw:CARD=HDMI,DEV=9 HDA ATI HDMI, HDMI 3 Hardware device with all software conversions plughw:CARD=HDMI,DEV=10 HDA ATI HDMI, HDMI 4 Hardware device with all software conversions plughw:CARD=HDMI,DEV=11 HDA ATI HDMI, HDMI 5 Hardware device with all software conversions --===============0500960700539247151== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="bug-pulseaudio-pactl_list.yCMrsF" Connection failure: Connection refused pa_context_connect() failed: Connection refused --===============0500960700539247151== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="bug-pulseaudio-pactl_info.pOMaXM" Connection failure: Connection refused pa_context_connect() failed: Connection refused --===============0500960700539247151==-- -- Dr. Helge Kreutzmann [email protected] Dipl.-Phys. http://www.helgefjell.de/debian.php 64bit GNU powered gpg signed mail preferred Help keep free software "libre": http://www.ffii.de/
signature.asc
Description: Digital signature
