Mensaje citado por Pelayo Gonzalez <[EMAIL PROTECTED]>: > Mensaje citado por Frans Pop <[EMAIL PROTECTED]>: > > > On Sunday 29 January 2006 11:08, Pelayo Gonzalez wrote: > > > I think that we need to add the line 'options libata atapi_enabled=1' > > > to /etc/modprobe.conf in the initrd image of the debian-installer. > > > > Could you try to do this manually first to check that it works? > > When you get the first screen of the installer (language question), switch > > > to VT2 (using atl-F2) and use 'nano /etc/modprobe.conf' to add the line. > > > > One problem with this solution is that it only works for the installation > > itself. The user would still have a non-working CD drive after the reboot > > into the installed system. > > > > It's dificult to do with debian installer as libata is loaded BEFORE any > user > interaction, and no rmmod is present to remove and reload the modules. >
Well I've managed to boot with netinst daily-build (2006-01-16), and CDROM was detected. This is a micro-HowTo: 1 - boot: expert BOOT_DEBUG=3 2 - In the shell: nano /etc/modprobe.conf add the line: options libata atapi_enabled=1 save & quit exit from the shell 3 - Continue the installation. After choosing your language and keyboard you can go to the shell (Alt+F2) and verify that you CDROM is there: cat /proc/scsi/scsi 4 - After installs completes don't forget to configure your mkinitrd tool in order to pass 'atapi_enabled=1' to libata, and dpkg-reconfigure linux-image-2.6.15-1-686. Note: If for mkinitramfs you should add 'libata atapi_enabled=1' to /etc/mkinitramfs/modules FixMe: How to configure yaird?. Saludos Pelayo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
