Package: pcmciautils
Version: 012-2
Severity: normal
Thanks for working on this package.
After installation of pcmciautils my orinoco pcmcia card refused to work.
Following a suggestion in bug #343193, cardmgr was successfull in
recovering the wireless network.
I have included some basic debuging information
pcmcia-cs package installed
After reboot
#dmesg
-----------------------------------------><--------------
Yenta: CardBus bridge found at 0000:00:06.0 [14ef:0101]
Yenta: ISA IRQ mask 0x0000, PCI irq 169
Socket status: 30000410
....
pccard: PCMCIA card inserted into slot 0
usb 1-2: new low speed USB device using uhci_hcd and address 2
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x408-0x40f 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: excluding 0x800-0x87f
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
-------><---------------------------------------------
No wireless network. Check loaded modules
#lsmod
Module Size Used by
nvidia 4088592 10
agpgart 31688 1 nvidia
ipv6 230080 15
parport_pc 32708 0
lp 10692 0
parport 35144 2 parport_pc,lp
deflate 3712 0
zlib_deflate 20952 1 deflate
zlib_inflate 16448 1 deflate
twofish 44096 0
serpent 19584 0
aes_i586 38272 0
blowfish 8000 0
des 16384 0
sha256 12928 0
sha1 2624 0
crypto_null 2304 0
af_key 31376 2
snd_seq_dummy 3652 0
snd_seq_oss 29760 0
snd_seq_midi 8480 0
snd_seq_midi_event 6848 2 snd_seq_oss,snd_seq_midi
snd_seq 46352 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_via82xx 25048 0
gameport 14408 1 snd_via82xx
snd_ac97_codec 80684 1 snd_via82xx
snd_pcm_oss 46496 0
snd_mixer_oss 16768 1 snd_pcm_oss
snd_pcm 77768 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 22532 2 snd_seq,snd_pcm
snd_ac97_bus 2112 1 snd_ac97_codec
snd_page_alloc 9992 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7040 1 snd_via82xx
snd_rawmidi 23456 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 8012 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd 47588 11
snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9376 1 snd
uhci_hcd 28176 0
via_ircc 23444 0
irda 164476 1 via_ircc
crc_ccitt 2048 1 irda
pcmcia 36540 0
yenta_socket 25164 3
rsrc_nonstatic 12096 1 yenta_socket
pcmcia_core 38544 3 pcmcia,yenta_socket,rsrc_nonstatic
jfs 164996 2
dm_mod 52088 4
cx88_dvb 9604 0
nxt200x 12164 1 cx88_dvb
lgdt330x 7324 1 cx88_dvb
cx8802 11012 1 cx88_dvb
cx8800 29900 0
cx88xx 58528 3 cx88_dvb,cx8802,cx8800
saa7134_empress 9092 0
saa7134 107488 1 saa7134_empress
ir_kbd_i2c 7948 1 saa7134
video_buf_dvb 6020 1 cx88_dvb
cx22702 5700 1 cx88_dvb
or51132 9092 1 cx88_dvb
mt352 6020 1 cx88_dvb
dvb_pll 10628 4 cx88_dvb,nxt200x,cx22702,or51132
dvb_core 74216 1 video_buf_dvb
tveeprom 13840 1 cx88xx
ir_common 9348 3 cx88xx,saa7134,ir_kbd_i2c
videodev 9088 4 cx8800,cx88xx,saa7134_empress,saa7134
i2c_algo_bit 8392 1 cx88xx
v4l1_compat 12612 2 cx8800,saa7134
v4l2_common 5696 2 cx8800,saa7134
btcx_risc 4616 3 cx8802,cx8800,cx88xx
video_buf 20292 7
cx88_dvb,cx8802,cx8800,cx88xx,saa7134_empress,saa7134,video_buf_dvb
firmware_class 10176 3 pcmcia,nxt200x,or51132
w83627hf 23376 0
hwmon_vid 2368 1 w83627hf
eeprom 6800 0
i2c_isa 4672 1 w83627hf
i2c_viapro 7956 0
i2c_core 19792 15
cx88_dvb,nxt200x,lgdt330x,cx88xx,saa7134,ir_kbd_i2c,cx22702,or51132,mt352,tveeprom,i2c_algo_bit,w83627hf,eeprom,i2c_isa,i2c_viapro
lirc_streamzap 14852 1
lirc_dev 13348 1 lirc_streamzap
usbmouse 5120 0
usbcore 111748 4 uhci_hcd,lirc_streamzap,usbmouse
ide_cd 37188 0
cdrom 33760 1 ide_cd
joydev 8960 0
evdev 8896 0
unix 25712 265
Check the PCI bus
#lspci -vvv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333
AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d1e00000-d3efffff
Prefetchable memory behind bridge: c1c00000-d1cfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:05.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder (rev 05)
Subsystem: KWorld Computer Co. Ltd. KWorld/VStream XPert DVB-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 161
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:05.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
Decoder [MPEG Port] (rev 05)
Subsystem: KWorld Computer Co. Ltd. KWorld/VStream XPert DVB-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 161
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:06.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
Subsystem: CARRY Computer ENG. CO Ltd: Unknown device 0101
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 169
Region 0: Memory at 34000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 32000000-33fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:00:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder (rev 05)
Subsystem: KWorld Computer Co. Ltd. KWorld/VStream XPert DVB-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
Decoder [MPEG Port] (rev 05)
Subsystem: KWorld Computer Co. Ltd. KWorld/VStream XPert DVB-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:08.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder (rev 05)
Subsystem: KWorld Computer Co. Ltd. KWorld/VStream XPert DVB-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 185
Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:08.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio
Decoder [MPEG Port] (rev 05)
Subsystem: KWorld Computer Co. Ltd. KWorld/VStream XPert DVB-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 185
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 12
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 10)
Subsystem: Avance Logic Inc. MSI K7T266 Pro2-RU (MSI-6380 v2) onboard
audio (Realtek/ALC 200/200P)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at ec00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX
5200] (rev a1) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 9110
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 161
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at d3ee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW-
Rate=x4
Show the card
#pccardctl ident
Socket 0:
product info: "Avaya Communication", "Avaya Wireless PC Card", "Version
01.01", ""
manfid: 0x0156, 0x0002
function: 6 (network)
#pccardctl status
Socket 0:
5.0V 16-bit PC Card
Subdevice 0 (function 0) [unbound]
Now start using old pcmcia-cs package.
#cardmgr
Network now works
#dmesg
---------------------------------------------------><-----------------------
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please expect
breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
orinoco 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL
PROTECTED]>, et al)
orinoco_cs 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL
PROTECTED]>, et al)
eth0: Hardware identity 0001:0001:0004:0002
eth0: Station identity 001f:0001:0008:000a
eth0: Firmware determined as Lucent/Agere 8.10
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:2D:31:29:A5
eth0: Station name "HERMES I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 169, io 0x0100-0x013f
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: New link status: Connected (0001)
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
---><----------------------------------------------------------------------
Check to see which modules are now loaded
#lsmod
Module Size Used by
orinoco_cs 17288 1
orinoco 37780 1 orinoco_cs
hermes 7296 2 orinoco_cs,orinoco
nvidia 4088592 10
agpgart 31688 1 nvidia
ipv6 230080 15
parport_pc 32708 0
lp 10692 0
parport 35144 2 parport_pc,lp
deflate 3712 0
zlib_deflate 20952 1 deflate
zlib_inflate 16448 1 deflate
twofish 44096 0
serpent 19584 0
aes_i586 38272 0
blowfish 8000 0
des 16384 0
sha256 12928 0
sha1 2624 0
crypto_null 2304 0
af_key 31376 2
snd_seq_dummy 3652 0
snd_seq_oss 29760 0
snd_seq_midi 8480 0
snd_seq_midi_event 6848 2 snd_seq_oss,snd_seq_midi
snd_seq 46352 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_via82xx 25048 0
gameport 14408 1 snd_via82xx
snd_ac97_codec 80684 1 snd_via82xx
snd_pcm_oss 46496 0
snd_mixer_oss 16768 1 snd_pcm_oss
snd_pcm 77768 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 22532 2 snd_seq,snd_pcm
snd_ac97_bus 2112 1 snd_ac97_codec
snd_page_alloc 9992 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7040 1 snd_via82xx
snd_rawmidi 23456 2 snd_seq_midi,snd_mpu401_uart
snd_seq_device 8012 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd 47588 11
snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9376 1 snd
uhci_hcd 28176 0
via_ircc 23444 0
irda 164476 1 via_ircc
crc_ccitt 2048 1 irda
pcmcia 36540 3 orinoco_cs
yenta_socket 25164 4
rsrc_nonstatic 12096 1 yenta_socket
pcmcia_core 38544 3 pcmcia,yenta_socket,rsrc_nonstatic
jfs 164996 2
dm_mod 52088 4
cx88_dvb 9604 0
nxt200x 12164 1 cx88_dvb
lgdt330x 7324 1 cx88_dvb
cx8802 11012 1 cx88_dvb
cx8800 29900 0
cx88xx 58528 3 cx88_dvb,cx8802,cx8800
saa7134_empress 9092 0
saa7134 107488 1 saa7134_empress
ir_kbd_i2c 7948 1 saa7134
video_buf_dvb 6020 1 cx88_dvb
cx22702 5700 1 cx88_dvb
or51132 9092 1 cx88_dvb
mt352 6020 1 cx88_dvb
dvb_pll 10628 4 cx88_dvb,nxt200x,cx22702,or51132
dvb_core 74216 1 video_buf_dvb
tveeprom 13840 1 cx88xx
ir_common 9348 3 cx88xx,saa7134,ir_kbd_i2c
videodev 9088 4 cx8800,cx88xx,saa7134_empress,saa7134
i2c_algo_bit 8392 1 cx88xx
v4l1_compat 12612 2 cx8800,saa7134
v4l2_common 5696 2 cx8800,saa7134
btcx_risc 4616 3 cx8802,cx8800,cx88xx
video_buf 20292 7
cx88_dvb,cx8802,cx8800,cx88xx,saa7134_empress,saa7134,video_buf_dvb
firmware_class 10176 3 pcmcia,nxt200x,or51132
w83627hf 23376 0
hwmon_vid 2368 1 w83627hf
eeprom 6800 0
i2c_isa 4672 1 w83627hf
i2c_viapro 7956 0
i2c_core 19792 15
cx88_dvb,nxt200x,lgdt330x,cx88xx,saa7134,ir_kbd_i2c,cx22702,or51132,mt352,tveeprom,i2c_algo_bit,w83627hf,eeprom,i2c_isa,i2c_viapro
lirc_streamzap 14852 1
lirc_dev 13348 1 lirc_streamzap
usbmouse 5120 0
usbcore 111748 4 uhci_hcd,lirc_streamzap,usbmouse
ide_cd 37188 0
cdrom 33760 1 ide_cd
joydev 8960 0
evdev 8896 0
unix 25712 253
Please let me know of any other info you may need for debugging.
Regards
Ben
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Versions of packages pcmciautils depends on:
ii libc6 2.3.5-12 GNU C Library: Shared libraries an
ii libsysfs1 1.3.0-7 interface library to sysfs
ii module-init-tools 3.2.2-1 tools for managing Linux kernel mo
ii udev 0.082-1 /dev/ and hotplug management daemo
pcmciautils recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
