I am facing the same nmi bug soft lock in Apple g5 quad core with radeon ati hd7460 pci-express (the bug came in hypervisor console driver hvcs.ko)
Il 22/nov/2016 11:27 PM, "Václav Ovsík" <vaclav.ov...@gmail.com> ha scritto: > Package: src:linux > Version: 4.8.7-1 > Severity: normal > > Dear Maintainer, > I'm unable to boot into functional system with KMS radeon. When > radeon.modeset=0 on kernel command-line system it starts and run OK. > Without disabled modeset, mostly the screen goes blank, but sometimes > the messages stays on console. System is locked and not respond to sysrq > or so. Kernel stack is displayed periodically as watchdog initiates. > Captured messages (using netconsole) are attached. > > Regards > -- > Zito > > -- Package-specific info: > ** Version: > Linux version 4.8.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version > 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.7-1 (2016-11-13) > > ** Command line: > BOOT_IMAGE=/vmlinuz-4.8.0-1-amd64 > root=UUID=632652f0-7f3c-4316-a74d-d05f2fd4b3ae > ro radeon.modeset=0 > > ** Not tainted > > ** Kernel log: > [ 3.010746] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE > 9317 PQ: 0 ANSI: 0 > [ 3.011944] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE > 9317 PQ: 0 ANSI: 0 > [ 3.013151] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE > 9317 PQ: 0 ANSI: 0 > [ 3.082153] sd 6:0:0:3: [sde] Attached SCSI removable disk > [ 3.083229] sd 6:0:0:0: [sdb] Attached SCSI removable disk > [ 3.084577] sd 6:0:0:1: [sdc] Attached SCSI removable disk > [ 3.085913] sd 6:0:0:2: [sdd] Attached SCSI removable disk > [ 4.576131] floppy0: no floppy controllers found > [ 4.637754] PM: Starting manual resume from disk > [ 4.637800] PM: Hibernation image partition 8:2 present > [ 4.637801] PM: Looking for hibernation image. > [ 4.639867] PM: Image not found (code -22) > [ 4.639868] PM: Hibernation image not present or could not be loaded. > [ 5.144483] EXT4-fs (sda3): mounted filesystem with ordered data mode. > Opts: (null) > [ 6.504046] random: crng init done > [ 6.629488] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 6.773851] systemd[1]: systemd 232 running in system mode. (+PAM > +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP > +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) > [ 6.774077] systemd[1]: Detected architecture x86-64. > [ 6.870642] systemd[1]: Set hostname to <vdr>. > [ 8.285798] systemd[1]: Listening on LVM2 metadata daemon socket. > [ 8.286228] systemd[1]: Listening on LVM2 poll daemon socket. > [ 8.286680] systemd[1]: Set up automount Arbitrary Executable File > Formats File System Automount Point. > [ 8.286996] systemd[1]: Listening on Device-mapper event daemon FIFOs. > [ 8.287353] systemd[1]: Listening on Journal Audit Socket. > [ 8.287674] systemd[1]: Started Dispatch Password Requests to Console > Directory Watch. > [ 8.287972] systemd[1]: Listening on RPCbind Server Activation Socket. > [ 9.059352] loop: module loaded > [ 9.149613] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro > [ 9.498760] RPC: Registered named UNIX socket transport module. > [ 9.498803] RPC: Registered udp transport module. > [ 9.498837] RPC: Registered tcp transport module. > [ 9.498871] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 10.258718] systemd-journald[221]: File /var/log/journal/ > 0ca8a8b0a1569675c187692c5066cae3/system.journal corrupted or uncleanly > shut down, renaming and replacing. > [ 10.623394] systemd-journald[221]: Received request to flush runtime > journal from PID 1 > [ 11.485959] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS: > 00/PNP0C0C:00/input/input6 > [ 11.486007] ACPI: Power Button [PWRB] > [ 11.486125] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN: > 00/input/input7 > [ 11.486164] ACPI: Power Button [PWRF] > [ 11.552262] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, > revision 0 > [ 11.552358] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller > at 0xb10 > [ 11.724952] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 11.739879] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 > [ 11.740025] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, > Revision ID: 0x14 > [ 11.740083] sp5100_tco: failed to find MMIO address, giving up. > [ 11.868374] [drm] Initialized drm 1.1.0 20060810 > [ 11.877794] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 11.877895] sr 4:0:1:0: Attached scsi generic sg1 type 5 > [ 11.877981] sd 6:0:0:0: Attached scsi generic sg2 type 0 > [ 11.878062] sd 6:0:0:1: Attached scsi generic sg3 type 0 > [ 11.878149] sd 6:0:0:2: Attached scsi generic sg4 type 0 > [ 11.878229] sd 6:0:0:3: Attached scsi generic sg5 type 0 > [ 11.990613] parport_pc 00:04: reported by Plug and Play ACPI > [ 11.990714] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > [ 12.280244] [drm:radeon_init [radeon]] *ERROR* No UMS support in radeon > module! > [ 12.295488] k8temp 0000:00:18.3: Temperature readouts might be wrong - > check erratum #141 > [ 12.350432] input: PC Speaker as /devices/platform/pcspkr/input/input8 > [ 12.483323] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver > chip loaded successfully > [ 12.494928] flexcop-pci: will use the HW PID filter. > [ 12.494969] flexcop-pci: card revision 2 > [ 12.520394] DVB: registering new adapter (FlexCop Digital TV device) > [ 12.522128] b2c2-flexcop: MAC address = 00:d0:d7:12:f8:ae > [ 12.522595] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) > [ 12.522635] CX24123: wrong demod revision: 87 > [ 12.814375] input: HDA ATI HDMI HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:01.0/0000:01:05.2/sound/card1/input9 > [ 12.817841] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: > line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line > [ 12.817896] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 > (0x0/0x0/0x0/0x0/0x0) > [ 12.817937] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 > (0x1b/0x0/0x0/0x0/0x0) > [ 12.817975] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 > [ 12.818010] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 > [ 12.818045] snd_hda_codec_realtek hdaudioC0D0: inputs: > [ 12.818081] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 > [ 12.818116] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 > [ 12.818151] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a > [ 12.832201] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00: > 14.2/sound/card0/input10 > [ 12.832335] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00: > 14.2/sound/card0/input11 > [ 12.832446] input: HDA ATI SB Line as /devices/pci0000:00/0000:00: > 14.2/sound/card0/input12 > [ 12.832578] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00: > 14.2/sound/card0/input13 > [ 12.832692] input: HDA ATI SB Front Headphone as > /devices/pci0000:00/0000:00:14.2/sound/card0/input14 > [ 12.842420] ppdev: user-space parallel port driver > [ 12.929940] kvm: Nested Virtualization enabled > [ 12.943548] powernow_k8: fid 0xf (2300 MHz), vid 0xe > [ 12.943590] powernow_k8: fid 0xe (2200 MHz), vid 0xf > [ 12.943625] powernow_k8: fid 0xc (2000 MHz), vid 0x11 > [ 12.943660] powernow_k8: fid 0xa (1800 MHz), vid 0x13 > [ 12.943698] powernow_k8: fid 0x2 (1000 MHz), vid 0x16 > [ 12.943774] powernow_k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor > BE-2400 (2 cpu cores) (version 2.20.00) > [ 13.128477] b2c2-flexcop: found 'ST STV0299 DVB-S' . > [ 13.128544] b2c2_flexcop_pci 0000:03:05.0: DVB: registering adapter 5 > frontend 0 (ST STV0299 DVB-S)... > [ 13.128856] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev > 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete > [ 13.842271] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 > across:1952764k FS > [ 14.816253] floppy0: no floppy controllers found > [ 15.486194] EXT4-fs (sda1): mounted filesystem with ordered data mode. > Opts: (null) > [ 18.105361] r8169 0000:02:00.0 eth0: link down > [ 18.105378] r8169 0000:02:00.0 eth0: link down > [ 18.105509] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 19.971154] r8169 0000:02:00.0 eth0: link up > [ 19.971231] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 25.923335] input: lircd-uinput as /devices/virtual/input/input15 > [ 28.520086] b2c2_flexcop_pci 0000:03:05.0: DVB: adapter 5 frontend 0 > frequency 0 out of range (950000..2150000) > [ 3759.150438] perf: interrupt took too long (2503 > 2500), lowering > kernel.perf_event_max_sample_rate to 79750 > > ** Model information > sys_vendor: System manufacturer > product_name: System Product Name > product_version: System Version > chassis_vendor: Chassis Manufacture > chassis_version: Chassis Version > bios_vendor: Phoenix Technologies, LTD > bios_version: ASUS M2A-VM HDMI ACPI BIOS Revision 2302 > board_vendor: ASUSTeK Computer INC. > board_name: M2A-VM HDMI > board_version: 1.XX > > ** Loaded modules: > uinput > dvb_pll > powernow_k8 > kvm_amd > ppdev > stv0299 > snd_hda_codec_realtek > snd_hda_codec_hdmi > snd_hda_codec_generic > snd_cmipci > kvm > snd_mpu401_uart > snd_opl3_lib > irqbypass > snd_rawmidi > snd_seq_device > b2c2_flexcop_pci > b2c2_flexcop > s5h1420 > cx24113 > gameport > cx24123 > dvb_core > snd_hda_intel > snd_hda_codec > snd_hda_core > pcspkr > serio_raw > snd_hwdep > k8temp > ttm > joydev > evdev > snd_pcm > drm_kms_helper > parport_pc > snd_timer > sg > drm > i2c_algo_bit > snd > asus_atk0110 > soundcore > sp5100_tco > shpchp > parport > i2c_piix4 > button > acpi_cpufreq > tpm_tis > tpm_tis_core > tpm > sunrpc > loop > ip_tables > x_tables > autofs4 > ext4 > crc16 > jbd2 > crc32c_generic > fscrypto > ecb > glue_helper > lrw > gf128mul > ablk_helper > cryptd > aes_x86_64 > mbcache > sr_mod > cdrom > sd_mod > ata_generic > hid_generic > usbhid > hid > uas > usb_storage > ohci_pci > psmouse > thermal > fan > fjes > ehci_pci > ohci_hcd > ehci_hcd > pata_atiixp > ahci > libahci > firewire_ohci > firewire_core > crc_itu_t > libata > scsi_mod > usbcore > r8169 > mii > usb_common > > ** PCI devices: > 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 > Host Bridge [1002:7910] > Subsystem: ASUSTeK Computer Inc. RS690 Host Bridge [1043:826d] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 64 > > 00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 > PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 99 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fda00000-fdbfffff > Prefetchable memory behind bridge: 00000000f0000000- > 00000000f7ffffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel modules: shpchp > > 00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 > PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin ? routed to IRQ 24 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fdf00000-fdffffff > Prefetchable memory behind bridge: 00000000fdc00000- > 00000000fdcfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > > 00:12.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] > SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) > Subsystem: ASUSTeK Computer Inc. SB600 Non-Raid-5 SATA [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 22 > Region 0: I/O ports at ff00 [size=8] > Region 1: I/O ports at fe00 [size=4] > Region 2: I/O ports at fd00 [size=8] > Region 3: I/O ports at fc00 [size=4] > Region 4: I/O ports at fb00 [size=16] > Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ahci > Kernel modules: ahci > > 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] > SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI0) [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci-pci > Kernel modules: ohci_pci > > 00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] > SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI1) [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci-pci > Kernel modules: ohci_pci > > 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] > SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI2) [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci-pci > Kernel modules: ohci_pci > > 00:13.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] > SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI3) [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci-pci > Kernel modules: ohci_pci > > 00:13.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] > SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. SB600 USB (OHCI4) [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci-pci > Kernel modules: ohci_pci > > 00:13.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] > SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. SB600 USB Controller (EHCI) > [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin D routed to IRQ 19 > Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci-pci > Kernel modules: ehci_pci > > 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus > Controller [1002:4385] (rev 14) > Subsystem: ASUSTeK Computer Inc. SBx00 SMBus Controller [1043:81ef] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Region 0: I/O ports at 0b00 [size=16] > Capabilities: <access denied> > Kernel driver in use: piix4_smbus > Kernel modules: i2c_piix4, sp5100_tco > > 00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 > IDE [1002:438c] (prog-if 8a [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. SB600 IDE [1043:81ef] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 > Region 4: I/O ports at f900 [size=16] > Kernel driver in use: pata_atiixp > Kernel modules: pata_atiixp, ata_generic > > 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 > Azalia (Intel HDA) [1002:4383] > Subsystem: ASUSTeK Computer Inc. SBx00 Azalia (Intel HDA) > [1043:8249] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > Kernel modules: snd_hda_intel > > 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 > PCI to LPC Bridge [1002:438d] > Subsystem: ASUSTeK Computer Inc. SB600 PCI to LPC Bridge > [1043:81ef] > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 > PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: fde00000-fdefffff > Prefetchable memory behind bridge: fdd00000-fddfffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > > 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > [Athlon64/Opteron] Address Map [1022:1101] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > [Athlon64/Opteron] DRAM Controller [1022:1102] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > [Athlon64/Opteron] Miscellaneous Control [1022:1103] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > Kernel driver in use: k8temp > Kernel modules: k8temp > > 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. > [AMD/ATI] RS690 [Radeon X1200] [1002:791e] (prog-if 00 [VGA controller]) > Subsystem: ASUSTeK Computer Inc. RS690 [Radeon X1200] [1043:826d] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 3 > Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M] > Region 2: Memory at fdbe0000 (64-bit, non-prefetchable) [size=64K] > Region 4: I/O ports at de00 [size=256] > Region 5: Memory at fda00000 (32-bit, non-prefetchable) [size=1M] > [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] > Capabilities: <access denied> > Kernel modules: radeon > > 01:05.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 > HDMI Audio [Radeon Xpress 1200 Series] [1002:7919] > Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS690 HDMI Audio > [Radeon Xpress 1200 Series] [1002:7919] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 26 > Region 0: Memory at fdbfc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > Kernel modules: snd_hda_intel > > 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev > 01) > Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 25 > Region 0: I/O ports at ee00 [size=256] > Region 2: Memory at fdfff000 (64-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at fdf00000 [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: r8169 > Kernel modules: r8169 > > 03:05.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 > FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 02) > Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / > Technisat SkyStar2 DVB card [13d0:2103] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at fdee0000 (32-bit, non-prefetchable) [size=64K] > Region 1: I/O ports at cf00 [size=32] > Kernel driver in use: b2c2_flexcop_pci > Kernel modules: b2c2_flexcop_pci > > 03:06.0 Multimedia audio controller [0401]: C-Media Electronics Inc > CMI8738/CMI8768 PCI Audio [13f6:0111] (rev 10) > Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device > [13f6:0111] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping+ SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (500ns min, 6000ns max) > Interrupt: pin A routed to IRQ 21 > Region 0: I/O ports at cc00 [size=256] > Capabilities: <access denied> > Kernel driver in use: snd_cmipci > Kernel modules: snd_cmipci > > 03:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 > [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 > [OHCI]) > Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81fe] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] > Region 1: I/O ports at ce00 [size=128] > Capabilities: <access denied> > Kernel driver in use: firewire_ohci > Kernel modules: firewire_ohci > > > ** USB devices: > Bus 001 Device 004: ID 05e3:070e Genesys Logic, Inc. USB 2.0 Card Reader > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 003: ID 04d9:2519 Holtek Semiconductor, Inc. Shenzhen > LogoTech 2.4GHz receiver > Bus 003 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > -- System Information: > Debian Release: stretch/sid > APT prefers unstable > APT policy: (500, 'unstable'), (1, 'experimental') > Architecture: amd64 (x86_64) > > Kernel: Linux 4.8.0-1-amd64 (SMP w/2 CPU cores) > Locale: LANG=en_US.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > Init: systemd (via /run/systemd/system) > > Versions of packages linux-image-4.8.0-1-amd64 depends on: > ii initramfs-tools [linux-initramfs-tool] 0.125 > ii kmod 23-1 > ii linux-base 4.5 > > Versions of packages linux-image-4.8.0-1-amd64 recommends: > ii firmware-linux-free 3.4 > ii irqbalance 1.1.0-2 > > Versions of packages linux-image-4.8.0-1-amd64 suggests: > pn debian-kernel-handbook <none> > ii grub-pc 2.02~beta3-3 > pn linux-doc-4.8 <none> > > Versions of packages linux-image-4.8.0-1-amd64 is related to: > ii firmware-amd-graphics 20160824-1 > pn firmware-atheros <none> > pn firmware-bnx2 <none> > pn firmware-bnx2x <none> > pn firmware-brcm80211 <none> > pn firmware-cavium <none> > pn firmware-intel-sound <none> > pn firmware-intelwimax <none> > pn firmware-ipw2x00 <none> > pn firmware-ivtv <none> > pn firmware-iwlwifi <none> > pn firmware-libertas <none> > ii firmware-linux-nonfree 20160824-1 > ii firmware-misc-nonfree 20160824-1 > pn firmware-myricom <none> > pn firmware-netxen <none> > pn firmware-qlogic <none> > ii firmware-realtek 20160824-1 > pn firmware-samsung <none> > pn firmware-siano <none> > pn firmware-ti-connectivity <none> > pn xen-hypervisor <none> > > -- no debconf information > >
