On Sun, 6 Nov 2016 22:31:11 +0100 Geert Stappers <stapp...@stappers.nl> wrote: > On Tue, Nov 01, 2011 at 05:45:23PM +0100, Ondrej Moravek wrote: > > Package: radvd > > Version: 1:1.6-1.1 > > Severity: normal > > > > Package radvd fails to start on boot sequence without any warning or > > error message to daemon.log/syslog. I am using a hurricane electric > > ipv6 tunnel with following configuration: > > > > auto he-ipv6 > > iface he-ipv6 inet6 v4tunnel > > address 2001:470:1f0b:cf5::2 > > netmask 64 > > endpoint 216.66.80.30 > > local 192.168.10.103 > > gateway 2001:470:1f0b:cf5::1 > > ttl 64 > > > > I am routing all IPv6 traffic from my local network to this ipv6 > > interface. When I start radvd manually it starts without any problems > > and all LAN client PCs are receiving automaticly-configured IPv6 > > addresses. I've also tried to add ipv6 to /etc/modules just to be sure. > > > > I am able to provide any information > > that would be necessary to solve this problem. > > Have there been any tests with 'post-up' from interfaces(5)? > > Do `man 5 interfaces` and search for 'post-up' for information.
I guess it is not important anymore. I really do not remember how I solved this :) But I suppose I somehow did... > > > Thanks! > > > It took five years for this response. Sad, but true. > Well, this happens sometimes. Thanks anyway, you can close this bug, I don't think it's relevant to the current release. > > > Groeten > Geert Stappers > -- > Leven en laten leven > > Ondrej Moravek
