Package: src:linux
Version: 4.7.8-1
Severity: important
Dear Mantainer,
I've installed debian testing with non-free firmware some days ago on Asus
E200HA
and I've noticed this bug, which has already been reported (bug #841007 on
bugreporter for kernel 4.8, bug #833016 on debian-kernel mailing list).
I haven't installed any default graphical interface. When, after boot, the login
console appears, by pressing any key the system immediately shuts down. I
manage to
use the laptop connecting an USB keyboard.
I have noticed some things:
- by removing i2c_hid module, pressing any key doesn't cause shutdown (but of
course
the keyboard won't work anyway).
- in recovery mode, the keyboard doesn't work, but again here pressing any key
doesn't cause shutdown.
- in /proc/bus/input/devices the laptop keyboard seems to be missing. The
output is
pasted below.
- I don't know if it's connected anyhow, but the following error comes up at
boot
(pasted from dmesg):
[ 2.921049] i8042: Can't read CTR while initializing i8042
[ 2.921411] i8042: probe of i8042 failed with error -5
I haven't tried any other kernel yet.
Kind regards,
Elisa
$ cat /proc/bus/input/devices:
I: Bus=0003 Vendor=093a Product=2510 Version=0111
N: Name="PixArt USB Optical Mouse"
P: Phys=usb-0000:00:14.0-2/input0
S:
Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:093A:2510.0001/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0003 Vendor=046d Product=c31c Version=0110
N: Name="Logitech USB Keyboard"
P: Phys=usb-0000:00:14.0-4/input0
S:
Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C31C.0002/input/input1
U: Uniq=
H: Handlers=sysrq kbd leds event1
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f
I: Bus=0003 Vendor=046d Product=c31c Version=0110
N: Name="Logitech USB Keyboard"
P: Phys=usb-0000:00:14.0-4/input1
S:
Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C31C.0003/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=1b
B: KEY=2010000 397a d801d001 1e0000 0 0 0
B: ABS=1 0
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=4000 0 0 0 0
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=1043 Product=0000 Version=0000
N: Name="Asus Wireless Radio Control"
P: Phys=asus-wireless/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input7
U: Uniq=
H: Handlers=kbd rfkill event7
B: PROP=0
B: EV=3
B: KEY=800000 0 0 0 0 0 0 0
I: Bus=0003 Vendor=0bda Product=57ed Version=0001
N: Name="USB2.0 VGA UVC WebCam"
P: Phys=usb-0000:00:14.0-1/button
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input8
U: Uniq=
H: Handlers=kbd event8
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0 0 0 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input9
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0018 Vendor=04f3 Product=0009 Version=0000
N: Name="Elan Touchpad"
P: Phys=
S: Sysfs=/devices/pci0000:00/808622C1:02/i2c-2/i2c-ELAN0100:00/input/input10
U: Uniq=
H: Handlers=mouse1 event10
B: PROP=5
B: EV=b
B: KEY=e520 0 10000 0 0 0 0 0 0 0 0
B: ABS=6638000 13000003
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Asus WMI hotkeys"
P: Phys=asus-nb-wmi/input0
S: Sysfs=/devices/platform/asus-nb-wmi/input/input11
U: Uniq=
H: Handlers=kbd rfkill event11
B: PROP=0
B: EV=100013
B: KEY=80000 0 0 8000 0 0 0 0 0 a1606f 900000 82000278 501000 e0000 0 0 0
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=3
B: KEY=3e000b 0 0 0 0 0 0 0
-- Package-specific info:
** Version:
Linux version 4.7.0-1-686-pae (debian-ker...@lists.debian.org) (gcc version
5.4.1 20160904 (Debian 5.4.1-2) ) #1 SMP Debian 4.7.8-1 (2016-10-19)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-686-pae
root=UUID=0025f416-f362-4eda-a6b9-aa08388274e6 ro quiet
** Not tainted
** Kernel log:
[ 7.430296] NET: Registered protocol family 31
[ 7.430301] Bluetooth: HCI device and connection manager initialized
[ 7.430310] Bluetooth: HCI socket layer initialized
[ 7.430317] Bluetooth: L2CAP socket layer initialized
[ 7.430332] Bluetooth: SCO socket layer initialized
[ 7.439828] ACPI: Battery Slot [BATC] (battery present)
[ 7.441440] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (0bda:57ed)
[ 7.445555] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not
initialized!
[ 7.445601] uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not
initialized!
[ 7.445608] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not
initialized!
[ 7.445805] input: USB2.0 VGA UVC WebCam as
/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input8
[ 7.446010] usbcore: registered new interface driver uvcvideo
[ 7.446015] USB Video Class driver (1.1.1)
[ 7.487167] usbcore: registered new interface driver btusb
[ 7.530320] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.635242] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 7.731160] Adding 1986556k swap on /dev/mmcblk0p6. Priority:-1 extents:1
across:1986556k SSFS
[ 7.783230] input: Elan Touchpad as
/devices/pci0000:00/808622C1:02/i2c-2/i2c-ELAN0100:00/input/input10
[ 7.795504] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data
may be corrupt. Please run fsck.
[ 7.821244] intel_rapl: Found RAPL domain package
[ 7.821253] intel_rapl: Found RAPL domain core
[ 7.909832] asus_wmi: ASUS WMI generic driver loaded
[ 7.914003] asus_wmi: Initialization: 0x1
[ 7.914116] asus_wmi: BIOS WMI version: 7.9
[ 7.914209] asus_wmi: SFUN value: 0x37
[ 7.917905] input: Asus WMI hotkeys as
/devices/platform/asus-nb-wmi/input/input11
[ 7.919484] asus_wmi: Number of fans: 1
[ 8.059168] fbcon: inteldrmfb (fb0) is primary device
[ 8.060964] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.062623] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 8.062877] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 8.096110] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 8.128539] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 8.129490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.143119] intel_sst_acpi 808622A8:00: No matching machine driver found
[ 8.153556] iTCO_vendor_support: vendor-support=0
[ 8.157257] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.157380] iTCO_wdt: Found a Braswell SoC TCO device (Version=3,
TCOBASE=0x0460)
[ 8.158504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.282000] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.284744] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0
reset_mode 0
[ 8.319690] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.319692] Bluetooth: BNEP filters: protocol multicast
[ 8.319699] Bluetooth: BNEP socket layer initialized
[ 8.529555] ath10k_pci 0000:01:00.0: firmware: failed to load
ath10k/pre-cal-pci-0000:01:00.0.bin (-2)
[ 8.529558] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 8.529584] ath10k_pci 0000:01:00.0: firmware: failed to load
ath10k/cal-pci-0000:01:00.0.bin (-2)
[ 8.529586] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[ 8.535702] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware
ath10k/QCA9377/hw1.0/firmware-5.bin
[ 8.535720] ath10k_pci 0000:01:00.0: qca9377 hw1.0 target 0x05020000 chip_id
0x003820ff sub 1a3b:2b31
[ 8.535723] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs
0 testmode 0
[ 8.536691] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5
features ignore-otp crc32 79cea2c7
[ 8.603057] ath10k_pci 0000:01:00.0: firmware: direct-loading firmware
ath10k/QCA9377/hw1.0/board-2.bin
[ 8.603759] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32
93da0176
[ 8.935198] NET: Registered protocol family 4
[ 8.957166] NET: Registered protocol family 3
[ 8.976477] NET: Registered protocol family 5
[ 9.447728] Console: switching to colour frame buffer device 170x48
[ 9.475683] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.547769] systemd[1]: apt-daily.timer: Adding 5h 21min 36.512657s random
time.
[ 10.401995] ath10k_pci 0000:01:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp
max-sta 32 raw 0 hwcrypto 1
[ 10.404385] ath: EEPROM regdomain: 0x6a
[ 10.404397] ath: EEPROM indicates we should expect a direct regpair map
[ 10.404406] ath: Country alpha2 being used: 00
[ 10.404411] ath: Regpair used: 0x6a
[ 10.460691] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
[ 12.239862] random: nonblocking pool is initialized
[ 16.051160] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 21.369617] systemd[1]: apt-daily.timer: Adding 6h 15min 17.551272s random
time.
[ 23.539347] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 23.898883] systemd[1]: apt-daily.timer: Adding 10h 43min 43.926164s random
time.
[ 26.035226] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 28.553186] ath10k_pci 0000:01:00.0: no channel configured; ignoring
frame(s)!
[ 28.604562] ath10k_pci 0000:01:00.0: no channel configured; ignoring
frame(s)!
[ 32.955767] wlp1s0: authenticate with 00:18:18:f5:cb:53
[ 33.000341] wlp1s0: send auth to 00:18:18:f5:cb:53 (try 1/3)
[ 33.002256] wlp1s0: authenticated
[ 33.007018] wlp1s0: associate with 00:18:18:f5:cb:53 (try 1/3)
[ 33.009531] wlp1s0: RX AssocResp from 00:18:18:f5:cb:53 (capab=0x431
status=0 aid=77)
[ 33.012923] wlp1s0: associated
[ 33.013081] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 33.095470] wlp1s0: Limiting TX power to 10 dBm as advertised by
00:18:18:f5:cb:53
[ 37.994217] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 117.603205] systemd[1]: apt-daily.timer: Adding 22min 24.351636s random time.
[ 118.889951] wlp1s0: deauthenticating from 00:18:18:f5:cb:53 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 120.855070] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 121.161059] systemd[1]: apt-daily.timer: Adding 1h 12min 14.122824s random
time.
[ 123.347529] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 123.610190] systemd[1]: apt-daily.timer: Adding 8h 1min 39.463927s random
time.
[ 125.730709] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 126.056780] systemd[1]: apt-daily.timer: Adding 4min 5.377532s random time.
[ 127.628416] wlp1s0: authenticate with 00:18:18:f5:cb:53
[ 127.673312] wlp1s0: send auth to 00:18:18:f5:cb:53 (try 1/3)
[ 127.675063] wlp1s0: authenticated
[ 127.679736] wlp1s0: associate with 00:18:18:f5:cb:53 (try 1/3)
[ 127.683996] wlp1s0: RX AssocResp from 00:18:18:f5:cb:53 (capab=0x431
status=0 aid=78)
[ 127.688037] wlp1s0: associated
[ 127.688200] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 127.711908] wlp1s0: Limiting TX power to 10 dBm as advertised by
00:18:18:f5:cb:53
[ 134.601315] systemd[1]: apt-daily.timer: Adding 10h 13min 44.916440s random
time.
** Model information
** Loaded modules:
hmac
drbg
ansi_cprng
ctr
ccm
arc4
appletalk
ax25
ipx
p8023
p8022
psnap
llc
cmac
bnep
ath10k_pci
ath10k_core
ath
mac80211
cfg80211
iTCO_wdt
iTCO_vendor_support
asus_nb_wmi
asus_wmi
sparse_keymap
intel_rapl
intel_powerclamp
coretemp
nls_ascii
nls_cp437
vfat
fat
kvm_intel
kvm
irqbypass
crc32_pclmul
pcspkr
snd_intel_sst_acpi
snd_intel_sst_core
snd_soc_sst_mfld_platform
snd_soc_sst_match
snd_soc_core
joydev
snd_compress
snd_pcm
lpc_ich
btusb
btrtl
mfd_core
btbcm
uvcvideo
btintel
elan_i2c
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
snd_timer
bluetooth
videobuf2_core
shpchp
battery
videodev
dw_dmac
snd
evdev
media
wmi
rfkill
i915
soundcore
dw_dmac_core
i2c_designware_platform
i2c_designware_core
video
drm_kms_helper
drm
tpm_crb
soc_button_array
i2c_algo_bit
int3400_thermal
int3403_thermal
processor_thermal_device
intel_soc_dts_iosf
acpi_thermal_rel
int340x_thermal_zone
asus_wireless
tpm_tis
tpm
acpi_pad
ac
button
ip_tables
x_tables
autofs4
ext4
ecb
crc16
jbd2
crc32c_generic
mbcache
hid_generic
usbhid
mmc_block
crc32c_intel
aesni_intel
xts
xhci_pci
aes_i586
lrw
gf128mul
xhci_hcd
ablk_helper
cryptd
usbcore
usb_common
thermal
i2c_hid
sdhci_acpi
hid
sdhci
mmc_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [8086:2280] (rev 22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series SoC Transaction Register [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration
Registers [8086:22b0] (rev 22) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 312
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:0b.0 Signal processing controller [1180]: Intel Corporation
Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management
Controller [8086:22dc] (rev 22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series Power Management Controller [1043:10b0]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 311
Region 0: Memory at 91639000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [8086:22b5] (rev 22) (prog-if
30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series USB xHCI Controller [1043:10b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 310
Region 0: Memory at 91600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1a.0 Encryption controller [1080]: Intel Corporation Atom/Celeron/Pentium
Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [8086:2298] (rev
22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine [1043:10b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 91500000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at 91400000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCI Express Port [8086:22c8] (rev 22) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 309
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: 91200000-913fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCU [8086:229c] (rev 22)
Subsystem: ASUSTeK Computer Inc. Atom/Celeron/Pentium Processor
x5-E8000/J3xxx/N3xxx Series PCU [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless
Network Adapter [168c:0042] (rev 30)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter
[1a3b:2b31]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 313
Region 0: Memory at 91200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 004: ID 13d3:3496 IMC Networks
Bus 001 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 4.7.0-1-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.7.0-1-686-pae depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.5
Versions of packages linux-image-4.7.0-1-686-pae recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-4.7.0-1-686-pae suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux <none>
pn linux-doc-4.7 <none>
Versions of packages linux-image-4.7.0-1-686-pae is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20160824-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
