Package: src:linux
Followup-For: Bug #838491
Dear Maintainer,
* What led up to the situation?
upgrade kernel and systemd to the version proveded in jessie-backports
* What exactly did you do (or not do) that was effective (or
ineffective)?
during normal usage (slurm cluster node):
load average: 1290.54, 513.19, 466.29
the load 5 peaks reache 2000
ps aux | grep kworker | wc -l
4188
I followed the Debugging instruction of
https://raw.githubusercontent.com/torvalds/linux/master/Documentation/workqueue.txt
echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
cat /sys/kernel/debug/tracing/trace_pipe > out.txt
after a vew seconds:
cat out.txt | awk '{print $8}' | sort | uniq -c | sort -n
1 function=do_cache_clean
1 function=pcpu_balance_workfn
1 function=xfs_eofblocks_worker
2 function=neigh_periodic_work
6 function=xfs_reclaim_worker
6 function=xlog_cil_push_work
8 function=disk_events_workfn
8 function=igb_watchdog_task
12 function=push_to_pool
13 function=blk_timeout_work
15 function=vmstat_shepherd
22 function=xfs_end_io
27 function=key_garbage_collector
27 function=lru_add_drain_per_cpu
34 function=delayed_fput
38 function=scsi_requeue_run_queue
39 function=blk_delay_work
40 function=cgroup_pidlist_destroy_work_fn
56 function=flush_to_ldisc
64 function=cache_reap
77 function=wb_workfn
101 function=os_execute_work_item
131 function=css_killed_work_fn
142 function=xfs_buf_ioend_work
156 function=vmstat_update
162 function=call_usermodehelper_exec_work
162 function=cgroup_release_agent
409 function=vmpressure_work_fn
497 function=css_release_work_fn
500 function=css_free_work_fn
47931 function=memcg_kmem_cache_create_func
I found https://bugzilla.kernel.org/show_bug.cgi?id=172981 which seams to be
the same problem.
-- Package-specific info:
** Version:
Linux version 4.7.0-0.bpo.1-amd64 (debian-ker...@lists.debian.org) (gcc version
4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.7.5-1~bpo8+2 (2016-10-01)
** Command line:
BOOT_IMAGE=/vmlinuz-4.7.0-0.bpo.1-amd64
root=UUID=d3b74f44-0f5e-4ba1-9606-ad42b76e5918 ro cgroup_enable=memory
swapaccount=1 elevator=deadline quiet nomodeset nouveau.modeset=0
** Tainted: POE (12289)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
* Unsigned module has been loaded.
** Model information
sys_vendor: Supermicro
product_name: X10SRA
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 2.0
board_vendor: Supermicro
board_name: X10SRA
board_version: 1.01
** Loaded modules:
8021q(E)
garp(E)
mrp(E)
stp(E)
llc(E)
nvidia_drm(POE)
nvidia_modeset(POE)
nvidia(POE)
drm_kms_helper(E)
drm(E)
openafs(POE)
nfsd(E)
auth_rpcgss(E)
nfs_acl(E)
nfs(E)
lockd(E)
grace(E)
fscache(E)
sunrpc(E)
intel_rapl(E)
sb_edac(E)
edac_core(E)
x86_pkg_temp_thermal(E)
intel_powerclamp(E)
coretemp(E)
xfs(E)
libcrc32c(E)
snd_hda_codec_hdmi(E)
iTCO_wdt(E)
iTCO_vendor_support(E)
mxm_wmi(E)
evdev(E)
kvm_intel(E)
kvm(E)
irqbypass(E)
crct10dif_pclmul(E)
crc32_pclmul(E)
ghash_clmulni_intel(E)
hmac(E)
drbg(E)
ansi_cprng(E)
aesni_intel(E)
aes_x86_64(E)
lrw(E)
gf128mul(E)
glue_helper(E)
ablk_helper(E)
cryptd(E)
pcspkr(E)
serio_raw(E)
snd_hda_codec_realtek(E)
snd_hda_codec_generic(E)
snd_hda_intel(E)
snd_hda_codec(E)
snd_hda_core(E)
snd_hwdep(E)
snd_pcm(E)
snd_timer(E)
snd(E)
soundcore(E)
lpc_ich(E)
mfd_core(E)
sg(E)
i2c_i801(E)
shpchp(E)
ipmi_msghandler(E)
wmi(E)
acpi_power_meter(E)
tpm_tis(E)
tpm(E)
button(E)
usbhid(E)
hid(E)
fuse(E)
autofs4(E)
ext4(E)
crc16(E)
jbd2(E)
crc32c_generic(E)
mbcache(E)
dm_mod(E)
sr_mod(E)
cdrom(E)
sd_mod(E)
crc32c_intel(E)
psmouse(E)
ahci(E)
igb(E)
libahci(E)
ehci_pci(E)
i2c_algo_bit(E)
ehci_hcd(E)
dca(E)
ptp(E)
pps_core(E)
xhci_pci(E)
libata(E)
xhci_hcd(E)
usbcore(E)
scsi_mod(E)
usb_common(E)
fjes(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-E DMI2 [8086:2f00] (rev
02)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Haswell-E PCI Express Root Port 1
[8086:2f02] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation Haswell-E PCI Express Root Port 3
[8086:2f08] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fb0fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 System peripheral [0880]: Intel Corporation Haswell-E Address Map,
VTd_Misc, System Management [8086:2f28] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:05.1 System peripheral [0880]: Intel Corporation Haswell-E Hot Plug
[8086:2f29] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:05.2 System peripheral [0880]: Intel Corporation Haswell-E RAS, Control
Status and Global Errors [8086:2f2a] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:05.4 PIC [0800]: Intel Corporation Haswell-E I/O Apic [8086:2f2c] (rev 02)
(prog-if 20 [IO(X)-APIC])
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fb51d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:11.0 Unassigned class [ff00]: Intel Corporation Wellsburg SPSR [8086:8d7c]
(rev 05)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Capabilities: <access denied>
00:11.4 SATA controller [0106]: Intel Corporation Wellsburg sSATA Controller
[AHCI mode] [8086:8d62] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 55
Region 0: I/O ports at f110 [size=8]
Region 1: I/O ports at f100 [size=4]
Region 2: I/O ports at f0f0 [size=8]
Region 3: I/O ports at f0e0 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at fb51c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:14.0 USB controller [0c03]: Intel Corporation Wellsburg USB xHCI Host
Controller [8086:8d31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fb500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:1a.0 USB controller [0c03]: Intel Corporation Wellsburg USB Enhanced Host
Controller #2 [8086:8d2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fb518000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation Wellsburg HD Audio Controller
[8086:8d20] (rev 05)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 65
Region 0: Memory at fb510000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Wellsburg PCI Express Root Port #1
[8086:8d10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fb400000-fb4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Wellsburg PCI Express Root Port #3
[8086:8d14] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fb300000-fb3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Wellsburg PCI Express Root Port #4
[8086:8d16] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fb200000-fb2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Wellsburg PCI Express Root Port #5
[8086:8d18] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: fb100000-fb1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.7 PCI bridge [0604]: Intel Corporation Wellsburg PCI Express Root Port #8
[8086:8d1e] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation Wellsburg USB Enhanced Host
Controller #1 [8086:8d26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fb517000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation Wellsburg LPC Controller
[8086:8d44] (rev 05)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Wellsburg 6-Port SATA
Controller [AHCI mode] [8086:8d02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 56
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f000 [size=32]
Region 5: Memory at fb516000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Wellsburg SMBus Controller [8086:8d22]
(rev 05)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fb515000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0580 [size=32]
Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation Wellsburg
Thermal Subsystem [8086:8d24] (rev 05)
Subsystem: Super Micro Computer Inc Device [15d9:0857]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: Memory at fb514000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1401]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:2375]
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 67
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0fba] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:2375]
Physical Slot: 4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 66
Region 0: Memory at fb080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
[1b21:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
04:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network
Connection [8086:1533] (rev 03)
Subsystem: Super Micro Computer Inc Device [15d9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fb300000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at fb380000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
05:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network
Connection [8086:1533] (rev 03)
Subsystem: Super Micro Computer Inc Device [15d9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fb200000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at fb280000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
06:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host
Controller [1b21:1142] (prog-if 30 [XHCI])
Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
[1b21:1142]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb100000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
07:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1182] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=07, secondary=08, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:03.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1182] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=08, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:07.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1182] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
ff:0b.0 System peripheral [0880]: Intel Corporation Haswell-E R3 QPI Link 0 & 1
Monitoring [8086:2f81] (rev 02)
Subsystem: Intel Corporation Haswell-E R3 QPI Link 0 & 1 Monitoring
[8086:2f81]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0b.1 Performance counters [1101]: Intel Corporation Haswell-E R3 QPI Link 0
& 1 Monitoring [8086:2f36] (rev 02)
Subsystem: Intel Corporation Haswell-E R3 QPI Link 0 & 1 Monitoring
[8086:2f36]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:0b.2 Performance counters [1101]: Intel Corporation Haswell-E R3 QPI Link 0
& 1 Monitoring [8086:2f37] (rev 02)
Subsystem: Intel Corporation Haswell-E R3 QPI Link 0 & 1 Monitoring
[8086:2f37]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:0c.0 System peripheral [0880]: Intel Corporation Haswell-E Unicast Registers
[8086:2fe0] (rev 02)
Subsystem: Intel Corporation Haswell-E Unicast Registers [8086:2fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0c.1 System peripheral [0880]: Intel Corporation Haswell-E Unicast Registers
[8086:2fe1] (rev 02)
Subsystem: Intel Corporation Haswell-E Unicast Registers [8086:2fe1]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0c.2 System peripheral [0880]: Intel Corporation Haswell-E Unicast Registers
[8086:2fe2] (rev 02)
Subsystem: Intel Corporation Haswell-E Unicast Registers [8086:2fe2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0c.3 System peripheral [0880]: Intel Corporation Haswell-E Unicast Registers
[8086:2fe3] (rev 02)
Subsystem: Intel Corporation Haswell-E Unicast Registers [8086:2fe3]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0f.0 System peripheral [0880]: Intel Corporation Haswell-E Buffered Ring
Agent [8086:2ff8] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0f.1 System peripheral [0880]: Intel Corporation Haswell-E Buffered Ring
Agent [8086:2ff9] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0f.4 System peripheral [0880]: Intel Corporation Haswell-E System Address
Decoder & Broadcast Registers [8086:2ffc] (rev 02)
Subsystem: Intel Corporation Device [8086:2fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0f.5 System peripheral [0880]: Intel Corporation Haswell-E System Address
Decoder & Broadcast Registers [8086:2ffd] (rev 02)
Subsystem: Intel Corporation Device [8086:2fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:0f.6 System peripheral [0880]: Intel Corporation Haswell-E System Address
Decoder & Broadcast Registers [8086:2ffe] (rev 02)
Subsystem: Intel Corporation Device [8086:2fe0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:10.0 System peripheral [0880]: Intel Corporation Haswell-E PCIe Ring
Interface [8086:2f1d] (rev 02)
Subsystem: Intel Corporation Haswell-E PCIe Ring Interface [8086:2f1d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:10.1 Performance counters [1101]: Intel Corporation Haswell-E PCIe Ring
Interface [8086:2f34] (rev 02)
Subsystem: Intel Corporation Haswell-E PCIe Ring Interface [8086:2f34]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:10.5 System peripheral [0880]: Intel Corporation Haswell-E Scratchpad &
Semaphore Registers [8086:2f1e] (rev 02)
Subsystem: Intel Corporation Haswell-E Scratchpad & Semaphore Registers
[8086:2f1e]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:10.6 Performance counters [1101]: Intel Corporation Haswell-E Scratchpad &
Semaphore Registers [8086:2f7d] (rev 02)
Subsystem: Intel Corporation Haswell-E Scratchpad & Semaphore Registers
[8086:2f7d]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:10.7 System peripheral [0880]: Intel Corporation Haswell-E Scratchpad &
Semaphore Registers [8086:2f1f] (rev 02)
Subsystem: Intel Corporation Haswell-E Scratchpad & Semaphore Registers
[8086:2f1f]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:12.0 System peripheral [0880]: Intel Corporation Haswell-E Home Agent 0
[8086:2fa0] (rev 02)
Subsystem: Intel Corporation Haswell-E Home Agent 0 [8086:2fa0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:12.1 Performance counters [1101]: Intel Corporation Haswell-E Home Agent 0
[8086:2f30] (rev 02)
Subsystem: Intel Corporation Haswell-E Home Agent 0 [8086:2f30]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:13.0 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Target Address, Thermal & RAS Registers [8086:2fa8] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Target Address, Thermal & RAS Registers [8086:2fa8]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:13.1 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Target Address, Thermal & RAS Registers [8086:2f71] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Target Address, Thermal & RAS Registers [8086:2f71]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:13.2 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel Target Address Decoder [8086:2faa] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel Target Address Decoder [8086:2faa]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:13.3 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel Target Address Decoder [8086:2fab] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel Target Address Decoder [8086:2fab]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:13.4 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel Target Address Decoder [8086:2fac] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel Target Address Decoder [8086:2fac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:13.5 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel Target Address Decoder [8086:2fad] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel Target Address Decoder [8086:2fad]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:13.6 System peripheral [0880]: Intel Corporation Haswell-E DDRIO Channel 0/1
Broadcast [8086:2fae] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:13.7 System peripheral [0880]: Intel Corporation Haswell-E DDRIO Global
Broadcast [8086:2faf] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:14.0 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 0 Thermal Control [8086:2fb0] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 0 Thermal Control [8086:2fb0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:14.1 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 1 Thermal Control [8086:2fb1] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 1 Thermal Control [8086:2fb1]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:14.2 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 0 ERROR Registers [8086:2fb2] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 0 ERROR Registers [8086:2fb2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:14.3 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 1 ERROR Registers [8086:2fb3] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 1 ERROR Registers [8086:2fb3]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:14.4 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 0 &
1 [8086:2fbc] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:14.5 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 0 &
1 [8086:2fbd] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:14.6 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 0 &
1 [8086:2fbe] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:14.7 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 0 &
1 [8086:2fbf] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:15.0 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 2 Thermal Control [8086:2fb4] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 2 Thermal Control [8086:2fb4]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:15.1 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 3 Thermal Control [8086:2fb5] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 3 Thermal Control [8086:2fb5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:15.2 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 2 ERROR Registers [8086:2fb6] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 2 ERROR Registers [8086:2fb6]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:15.3 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 0 Channel 3 ERROR Registers [8086:2fb7] (rev 02)
Subsystem: Intel Corporation Haswell-E Integrated Memory Controller 0
Channel 3 ERROR Registers [8086:2fb7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:16.0 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 1 Target Address, Thermal & RAS Registers [8086:2f68] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:16.6 System peripheral [0880]: Intel Corporation Haswell-E DDRIO Channel 2/3
Broadcast [8086:2f6e] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:16.7 System peripheral [0880]: Intel Corporation Haswell-E DDRIO Global
Broadcast [8086:2f6f] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:17.0 System peripheral [0880]: Intel Corporation Haswell-E Integrated Memory
Controller 1 Channel 0 Thermal Control [8086:2fd0] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: hswep_uncore
ff:17.4 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 2 &
3 [8086:2fb8] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:17.5 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 2 &
3 [8086:2fb9] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:17.6 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 2 &
3 [8086:2fba] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:17.7 System peripheral [0880]: Intel Corporation Haswell-E DDRIO (VMSE) 2 &
3 [8086:2fbb] (rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:1e.0 System peripheral [0880]: Intel Corporation Haswell-E Power Control
Unit [8086:2f98] (rev 02)
Subsystem: Intel Corporation Haswell-E Power Control Unit [8086:2f98]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:1e.1 System peripheral [0880]: Intel Corporation Haswell-E Power Control
Unit [8086:2f99] (rev 02)
Subsystem: Intel Corporation Haswell-E Power Control Unit [8086:2f99]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:1e.2 System peripheral [0880]: Intel Corporation Haswell-E Power Control
Unit [8086:2f9a] (rev 02)
Subsystem: Intel Corporation Haswell-E Power Control Unit [8086:2f9a]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:1e.3 System peripheral [0880]: Intel Corporation Haswell-E Power Control
Unit [8086:2fc0] (rev 02)
Subsystem: Intel Corporation Haswell-E Power Control Unit [8086:2fc0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at <ignored> [disabled]
Kernel driver in use: hswep_uncore
ff:1e.4 System peripheral [0880]: Intel Corporation Haswell-E Power Control
Unit [8086:2f9c] (rev 02)
Subsystem: Intel Corporation Haswell-E Power Control Unit [8086:2f9c]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:1f.0 System peripheral [0880]: Intel Corporation Haswell-E VCU [8086:2f88]
(rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
ff:1f.2 System peripheral [0880]: Intel Corporation Haswell-E VCU [8086:2f8a]
(rev 02)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
** USB devices:
Bus 006 Device 002: ID 8087:8002 Intel Corp.
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:800a Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.7.0-0.bpo.1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.7.0-0.bpo.1-amd64-unsigned depends on:
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 4.3~bpo8+1
Versions of packages linux-image-4.7.0-0.bpo.1-amd64-unsigned recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.1.0-2~bpo8+1
Versions of packages linux-image-4.7.0-0.bpo.1-amd64-unsigned suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-4.7 <none>
Versions of packages linux-image-4.7.0-0.bpo.1-amd64-unsigned is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
