Package: xserver-xorg-video-intel Version: 2:2.99.917+git20160706-1~bpo8+1 Followup-For: Bug #839177
Dear Maintainer, I've also installed kernel 4.7 from backports (4.6 was not available via installation of the linux-image-amd64 package), now GDM starts normally, acceleration also seems to work normally. I did: sudo apt install linux-image-4.7.0-0.bpo.1-amd64-unsigned -t jessie-backports -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Sep 29 15:16 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2401376 Feb 10 2015 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) /etc/X11/xorg.conf does not exist. Contents of /etc/X11/xorg.conf.d: --------------------------------- total 0 /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 4.7.0-0.bpo.1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.7.2-1~bpo8+1 (2016-09-07) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.1.log -rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.2.log -rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.3.log -rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.4.log -rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.5.log -rw-r--r-- 1 root root 20382 Sep 29 16:43 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 19.984] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 19.984] X Protocol Version 11, Revision 0 [ 19.984] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 19.984] Current Operating System: Linux debian-paul 4.7.0-0.bpo.1-amd64 #1 SMP Debian 4.7.2-1~bpo8+1 (2016-09-07) x86_64 [ 19.984] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-amd64 root=UUID=3b1cdc98-2b19-4b43-aecb-acac3dc98ee9 ro quiet [ 19.984] Build Date: 11 February 2015 12:32:02AM [ 19.984] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 19.984] Current version of pixman: 0.32.6 [ 19.984] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.984] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 19.984] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 29 16:43:11 2016 [ 20.080] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 20.142] (==) No Layout section. Using the first Screen section. [ 20.142] (==) No screen section available. Using defaults. [ 20.142] (**) |-->Screen "Default Screen Section" (0) [ 20.142] (**) | |-->Monitor "<default monitor>" [ 20.147] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 20.148] (==) Automatically adding devices [ 20.148] (==) Automatically enabling devices [ 20.148] (==) Automatically adding GPU devices [ 20.175] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 20.175] Entry deleted from font path. [ 20.182] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 20.182] (==) ModulePath set to "/usr/lib/xorg/modules" [ 20.182] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 20.199] (II) Loader magic: 0x557d48fb8d80 [ 20.199] (II) Module ABI versions: [ 20.199] X.Org ANSI C Emulation: 0.4 [ 20.199] X.Org Video Driver: 18.0 [ 20.199] X.Org XInput driver : 21.0 [ 20.199] X.Org Server Extension : 8.0 [ 20.200] (II) xfree86: Adding drm device (/dev/dri/card0) [ 20.203] (--) PCI:*(0:0:2:0) 8086:22b1:103c:80c5 rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072 [ 20.204] (II) LoadModule: "glx" [ 20.205] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 20.422] (II) Module glx: vendor="X.Org Foundation" [ 20.423] compiled for 1.16.4, module version = 1.0.0 [ 20.423] ABI class: X.Org Server Extension, version 8.0 [ 20.423] (==) AIGLX enabled [ 20.423] (==) Matched intel as autoconfigured driver 0 [ 20.423] (==) Matched intel as autoconfigured driver 1 [ 20.423] (==) Matched modesetting as autoconfigured driver 2 [ 20.423] (==) Matched fbdev as autoconfigured driver 3 [ 20.423] (==) Matched vesa as autoconfigured driver 4 [ 20.423] (==) Assigned the driver to the xf86ConfigLayout [ 20.423] (II) LoadModule: "intel" [ 20.459] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.517] (II) Module intel: vendor="X.Org Foundation" [ 20.517] compiled for 1.16.4, module version = 2.99.917 [ 20.517] Module class: X.Org Video Driver [ 20.518] ABI class: X.Org Video Driver, version 18.0 [ 20.518] (II) LoadModule: "modesetting" [ 20.518] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 20.536] (II) Module modesetting: vendor="X.Org Foundation" [ 20.536] compiled for 1.16.4, module version = 0.9.0 [ 20.536] Module class: X.Org Video Driver [ 20.536] ABI class: X.Org Video Driver, version 18.0 [ 20.536] (II) LoadModule: "fbdev" [ 20.537] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 20.538] (II) Module fbdev: vendor="X.Org Foundation" [ 20.538] compiled for 1.15.99.904, module version = 0.4.4 [ 20.538] Module class: X.Org Video Driver [ 20.538] ABI class: X.Org Video Driver, version 18.0 [ 20.539] (II) LoadModule: "vesa" [ 20.539] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 20.540] (II) Module vesa: vendor="X.Org Foundation" [ 20.540] compiled for 1.15.99.904, module version = 2.3.3 [ 20.540] Module class: X.Org Video Driver [ 20.540] ABI class: X.Org Video Driver, version 18.0 [ 20.540] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 20.541] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 20.542] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 20.542] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 20.542] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 20.542] (II) FBDEV: driver for framebuffer: fbdev [ 20.542] (II) VESA: driver for VESA chipsets: vesa [ 20.542] (++) using VT number 7 [ 20.566] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160425 [ 20.566] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160706-1~bpo8+1 (Vincent Cheng <vch...@debian.org>) [ 20.566] (II) intel(0): SNA compiled for use with valgrind [ 20.567] (WW) Falling back to old probe method for modesetting [ 20.567] (WW) Falling back to old probe method for fbdev [ 20.567] (II) Loading sub module "fbdevhw" [ 20.567] (II) LoadModule: "fbdevhw" [ 20.568] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 20.586] (II) Module fbdevhw: vendor="X.Org Foundation" [ 20.586] compiled for 1.16.4, module version = 0.0.2 [ 20.586] ABI class: X.Org Video Driver, version 18.0 [ 20.586] (WW) Falling back to old probe method for vesa [ 20.608] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics [ 20.608] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads [ 20.608] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.608] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.608] (==) intel(0): RGB weight 888 [ 20.608] (==) intel(0): Default visual is TrueColor [ 20.609] (II) intel(0): Output eDP1 has no monitor section [ 20.628] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1 [ 20.628] (II) intel(0): Enabled output eDP1 [ 20.629] (II) intel(0): Output DP1 has no monitor section [ 20.629] (II) intel(0): Enabled output DP1 [ 20.630] (II) intel(0): Output HDMI1 has no monitor section [ 20.630] (II) intel(0): Enabled output HDMI1 [ 20.631] (II) intel(0): Output DP2 has no monitor section [ 20.631] (II) intel(0): Enabled output DP2 [ 20.631] (II) intel(0): Output HDMI2 has no monitor section [ 20.631] (II) intel(0): Enabled output HDMI2 [ 20.631] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 20.632] (II) intel(0): Output VIRTUAL1 has no monitor section [ 20.632] (II) intel(0): Enabled output VIRTUAL1 [ 20.632] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 1 [ 20.633] (==) intel(0): TearFree disabled [ 20.634] (==) intel(0): DPI set to (96, 96) [ 20.634] (II) Loading sub module "dri2" [ 20.634] (II) LoadModule: "dri2" [ 20.634] (II) Module "dri2" already built-in [ 20.634] (II) Loading sub module "present" [ 20.635] (II) LoadModule: "present" [ 20.635] (II) Module "present" already built-in [ 20.635] (II) UnloadModule: "modesetting" [ 20.636] (II) Unloading modesetting [ 20.636] (II) UnloadModule: "fbdev" [ 20.636] (II) Unloading fbdev [ 20.636] (II) UnloadSubModule: "fbdevhw" [ 20.637] (II) Unloading fbdevhw [ 20.637] (II) UnloadModule: "vesa" [ 20.637] (II) Unloading vesa [ 20.638] (==) Depth 24 pixmap format is 32 bpp [ 20.663] (II) intel(0): SNA initialized with Cherryview (gen8) backend [ 20.663] (==) intel(0): Backing store enabled [ 20.663] (==) intel(0): Silken mouse enabled [ 20.663] (II) intel(0): HW Cursor enabled [ 20.663] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.664] (==) intel(0): DPMS enabled [ 20.665] (==) intel(0): Display hotplug detection enabled [ 20.665] (II) intel(0): [DRI2] Setup complete [ 20.665] (II) intel(0): [DRI2] DRI driver: i965 [ 20.665] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 20.665] (II) intel(0): direct rendering: DRI2 enabled [ 20.665] (II) intel(0): hardware support for Present enabled [ 20.665] (--) RandR disabled [ 20.678] (II) SELinux: Disabled on system [ 21.305] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 21.305] (II) AIGLX: enabled GLX_ARB_create_context [ 21.305] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 21.306] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 21.306] (II) AIGLX: enabled GLX_INTEL_swap_event [ 21.306] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 21.306] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 21.306] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 21.306] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 21.306] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 21.306] (II) AIGLX: Loaded and initialized i965 [ 21.306] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 21.335] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 1, position (0, 0), rotation normal, reflection none [ 21.335] (II) intel(0): Setting screen physical size to 361 x 203 [ 22.061] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 22.061] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 22.061] (II) LoadModule: "evdev" [ 22.062] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 22.235] (II) Module evdev: vendor="X.Org Foundation" [ 22.235] compiled for 1.16.0, module version = 2.9.0 [ 22.235] Module class: X.Org XInput Driver [ 22.235] ABI class: X.Org XInput driver, version 21.0 [ 22.235] (II) Using input driver 'evdev' for 'Power Button' [ 22.236] (**) Power Button: always reports core events [ 22.236] (**) evdev: Power Button: Device: "/dev/input/event3" [ 22.236] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 22.236] (--) evdev: Power Button: Found keys [ 22.236] (II) evdev: Power Button: Configuring as keyboard [ 22.236] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" [ 22.236] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 22.236] (**) Option "xkb_rules" "evdev" [ 22.236] (**) Option "xkb_model" "pc105" [ 22.236] (**) Option "xkb_layout" "us" [ 22.238] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 22.238] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 22.238] (II) Using input driver 'evdev' for 'Video Bus' [ 22.238] (**) Video Bus: always reports core events [ 22.238] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 22.238] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 22.238] (--) evdev: Video Bus: Found keys [ 22.238] (II) evdev: Video Bus: Configuring as keyboard [ 22.238] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5" [ 22.238] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 22.238] (**) Option "xkb_rules" "evdev" [ 22.238] (**) Option "xkb_model" "pc105" [ 22.238] (**) Option "xkb_layout" "us" [ 22.239] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 22.240] (II) No input driver specified, ignoring this device. [ 22.240] (II) This device may have been added with another device file. [ 22.242] (II) config/udev: Adding input device HP Webcam (/dev/input/event8) [ 22.242] (**) HP Webcam: Applying InputClass "evdev keyboard catchall" [ 22.242] (II) Using input driver 'evdev' for 'HP Webcam' [ 22.242] (**) HP Webcam: always reports core events [ 22.242] (**) evdev: HP Webcam: Device: "/dev/input/event8" [ 22.242] (--) evdev: HP Webcam: Vendor 0x5c8 Product 0x22a [ 22.242] (--) evdev: HP Webcam: Found keys [ 22.242] (II) evdev: HP Webcam: Configuring as keyboard [ 22.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8" [ 22.242] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 8) [ 22.242] (**) Option "xkb_rules" "evdev" [ 22.242] (**) Option "xkb_model" "pc105" [ 22.243] (**) Option "xkb_layout" "us" [ 22.244] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 22.244] (II) No input driver specified, ignoring this device. [ 22.244] (II) This device may have been added with another device file. [ 22.244] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10) [ 22.244] (II) No input driver specified, ignoring this device. [ 22.244] (II) This device may have been added with another device file. [ 22.245] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11) [ 22.245] (II) No input driver specified, ignoring this device. [ 22.245] (II) This device may have been added with another device file. [ 22.245] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12) [ 22.245] (II) No input driver specified, ignoring this device. [ 22.245] (II) This device may have been added with another device file. [ 22.246] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 22.246] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 22.246] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 22.246] (**) AT Translated Set 2 keyboard: always reports core events [ 22.246] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 22.246] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 22.246] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 22.246] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 22.246] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 22.246] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 22.246] (**) Option "xkb_rules" "evdev" [ 22.246] (**) Option "xkb_model" "pc105" [ 22.246] (**) Option "xkb_layout" "us" [ 22.248] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 22.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 22.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 22.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 22.248] (II) LoadModule: "synaptics" [ 22.248] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 22.261] (II) Module synaptics: vendor="X.Org Foundation" [ 22.261] compiled for 1.16.0.901, module version = 1.8.99 [ 22.261] Module class: X.Org XInput Driver [ 22.261] ABI class: X.Org XInput driver, version 21.0 [ 22.261] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 22.261] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 22.261] (**) Option "Device" "/dev/input/event1" [ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1330 - 5652 (res 40) [ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1094 - 4846 (res 89) [ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 22.281] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 22.281] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 22.281] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 22.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [ 22.308] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10) [ 22.309] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 22.309] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 22.309] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035 [ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 22.313] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 22.315] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 22.315] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 22.317] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 22.317] (II) No input driver specified, ignoring this device. [ 22.317] (II) This device may have been added with another device file. [ 22.320] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4) [ 22.321] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall" [ 22.321] (II) Using input driver 'evdev' for 'HP Wireless hotkeys' [ 22.321] (**) HP Wireless hotkeys: always reports core events [ 22.321] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event4" [ 22.321] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0 [ 22.321] (--) evdev: HP Wireless hotkeys: Found keys [ 22.321] (II) evdev: HP Wireless hotkeys: Configuring as keyboard [ 22.321] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4" [ 22.321] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 11) [ 22.322] (**) Option "xkb_rules" "evdev" [ 22.322] (**) Option "xkb_model" "pc105" [ 22.322] (**) Option "xkb_layout" "us" [ 22.324] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7) [ 22.324] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 22.324] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 22.324] (**) HP WMI hotkeys: always reports core events [ 22.324] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7" [ 22.325] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0 [ 22.325] (--) evdev: HP WMI hotkeys: Found keys [ 22.325] (II) evdev: HP WMI hotkeys: Configuring as keyboard [ 22.325] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7" [ 22.325] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12) [ 22.325] (**) Option "xkb_rules" "evdev" [ 22.325] (**) Option "xkb_model" "pc105" [ 22.325] (**) Option "xkb_layout" "us" [ 22.635] (II) intel(0): EDID vendor "SDC", prod id 20049 [ 22.636] (II) intel(0): Printing DDC gathered Modelines: [ 22.636] (II) intel(0): Modeline "1366x768"x0.0 77.20 1366 1430 1478 1616 768 770 775 792 -hsync -vsync (47.8 kHz eP) [ 22.636] (II) intel(0): Modeline "1366x768"x0.0 51.51 1366 1430 1478 1626 768 770 775 792 -hsync -vsync (31.7 kHz e) [ 30.440] (II) intel(0): switch to mode 1366x768@60.3 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 52.272] (II) AIGLX: Suspending AIGLX clients for VT switch udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=58955 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=29241 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b00000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=10317 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=37397 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3 E: EV=21 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: TAGS=:seat: E: USEC_INITIALIZED=55766 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3/event2 N: input/event2 E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3/event2 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=25179 P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9 E: EV=3 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_1_0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=HP_Webcam E: ID_MODEL_ENC=HP\x20Webcam E: ID_MODEL_ID=022a E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0 E: ID_REVISION=0101 E: ID_SERIAL=Generic_HP_Webcam_200901010001 E: ID_SERIAL_SHORT=200901010001 E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Generic E: ID_VENDOR_ENC=Generic E: ID_VENDOR_ID=05c8 E: KEY=100000 0 0 0 E: MODALIAS=input:b0003v05C8p022Ae0101-e0,1,kD4,ramlsfw E: NAME="HP Webcam" E: PHYS="usb-0000:00:14.0-3/button" E: PRODUCT=3/5c8/22a/101 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=937491 P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8 N: input/event8 S: input/by-id/usb-Generic_HP_Webcam_200901010001-event-if00 S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-id/usb-Generic_HP_Webcam_200901010001-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=HP_Webcam E: ID_MODEL_ENC=HP\x20Webcam E: ID_MODEL_ID=022a E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0 E: ID_REVISION=0101 E: ID_SERIAL=Generic_HP_Webcam_200901010001 E: ID_SERIAL_SHORT=200901010001 E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Generic E: ID_VENDOR_ENC=Generic E: ID_VENDOR_ID=05c8 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: USEC_INITIALIZED=937566 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10 E: EV=40001 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0001v10ECp0282e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PRODUCT=1/10ec/282/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=516169 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9 N: input/event9 E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=518980 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: NAME="HDA Intel PCH Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=10 E: TAGS=:seat: E: USEC_INITIALIZED=521309 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10 N: input/event10 E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: USEC_INITIALIZED=521389 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel PCH Headphone" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=521462 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11 N: input/event11 E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: USEC_INITIALIZED=521534 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=3" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=521612 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12 N: input/event12 E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: USEC_INITIALIZED=521682 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=20000 20 0 0 1500f02100000 3803078f900d401 feffffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D4,D9,E0,E1,E2,E3,EC,EE,F0,185,1D1,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=62113 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEYBOARD_KEY_81=fn_esc E: KEYBOARD_KEY_89=battery E: KEYBOARD_KEY_8a=screenlock E: KEYBOARD_KEY_8b=camera E: KEYBOARD_KEY_8c=media E: KEYBOARD_KEY_8e=dvd E: KEYBOARD_KEY_92=brightnessdown E: KEYBOARD_KEY_97=brightnessup E: KEYBOARD_KEY_b1=help E: KEYBOARD_KEY_b3=unknown E: KEYBOARD_KEY_d7=wlan E: KEYBOARD_KEY_ee=switchvideomode E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=17097 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/platform/i8042/serio1/input/input2 E: ABS=660800011000003 E: DEVPATH=/devices/platform/i8042/serio1/input/input2 E: EV=b E: ID_FOR_SEAT=input-platform-i8042-serio-1 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=e520 30000 0 0 0 0 E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw E: NAME="SynPS/2 Synaptics TouchPad" E: PHYS="isa0060/serio1/input0" E: PRODUCT=11/2/7/1b1 E: PROP=1 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=61605 P: /devices/platform/i8042/serio1/input/input2/event1 N: input/event1 S: input/by-path/platform-i8042-serio-1-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event1 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: USEC_INITIALIZED=21129 P: /devices/platform/i8042/serio1/input/input2/mouse0 N: input/mouse0 S: input/by-path/platform-i8042-serio-1-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse0 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=62305 P: /devices/platform/pcspkr/input/input7 E: DEVPATH=/devices/platform/pcspkr/input/input7 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=53818 P: /devices/platform/pcspkr/input/input7/event6 N: input/event6 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/platform/pcspkr/input/input7/event6 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: USEC_INITIALIZED=57964 P: /devices/virtual/input/input5 E: DEVPATH=/devices/virtual/input/input5 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: KEY=80000000000000 0 0 0 E: MODALIAS=input:b0019v0000p0000e0000-e0,1,kF7,ramlsfw E: NAME="HP Wireless hotkeys" E: PHYS="hpq6001/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=92616 P: /devices/virtual/input/input5/event4 N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/virtual/input/input5/event4 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: USEC_INITIALIZED=33325 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/virtual/input/input8 E: DEVPATH=/devices/virtual/input/input8 E: EV=33 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: KEY=4000000000 0 1000700000000 2102400 0 0 E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,8D,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5, E: MSC=10 E: NAME="HP WMI hotkeys" E: PHYS="wmi/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=22 E: TAGS=:seat: E: USEC_INITIALIZED=476860 P: /devices/virtual/input/input8/event7 N: input/event7 E: BACKSPACE=guess E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/virtual/input/input8/event7 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=477810 E: XKBLAYOUT=us E: XKBMODEL=pc105 DRM Information from dmesg: --------------------------- [ 1.618998] Linux agpgart interface v0.103 [ 8.665806] [drm] Initialized drm 1.1.0 20060810 [ 8.803653] [drm] Memory usable by graphics device = 2048M [ 8.803665] fb: switching to inteldrmfb from simple [ 8.803855] [drm] Replacing VGA console driver [ 8.803976] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.803979] [drm] Driver supports precise vblank timestamp query. [ 8.952266] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 [ 9.243334] fbcon: inteldrmfb (fb0) is primary device [ 11.106949] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device -- System Information: Debian Release: 8.6 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.7.0-0.bpo.1-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.19-18+deb8u6 ii libdrm-intel1 2.4.58-2 ii libdrm2 2.4.58-2 ii libpciaccess0 0.13.2-3+b1 ii libpixman-1-0 0.32.6-3 ii libudev1 215-17+deb8u5 ii libx11-6 2:1.6.2-3 ii libx11-xcb1 2:1.6.2-3 ii libxcb-dri2-0 1.10-3+b1 ii libxcb-dri3-0 1.10-3+b1 ii libxcb-sync1 1.10-3+b1 ii libxcb-util0 0.3.8-3 ii libxcb1 1.10-3+b1 ii libxcursor1 1:1.1.14-1+b1 ii libxdamage1 1:1.1.4-2+b1 ii libxext6 2:1.3.3-1 ii libxfixes3 1:5.0.1-2+b2 ii libxinerama1 2:1.1.3-1+b1 ii libxrandr2 2:1.4.2-1+b1 ii libxrender1 1:0.9.8-1+b1 ii libxshmfence1 1.1-4 ii libxss1 1:1.2.2-1 ii libxtst6 2:1.2.2-1+b1 ii libxv1 2:1.0.10-1+b1 ii libxvmc1 2:1.0.8-2+b1 ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1 xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information
