Package: dispcalgui
Version: 3.1.4.0-dmo1
Severity: important
--- Please enter the report below this line. ---
Dear Maintainer I would like to report the program goes in segmentation
fault after the first cycle (nine steps color). No other information
were displayed:
*log from console*
displaycal 3.1.4.0 2016-07-10T23:58:02.896555Z
debian stretch/sid x86_64
Python 2.7.12 (default, Jun 29 2016, 08:18:26)
[GCC 5.4.0 20160609]
wxPython 3.0.2.0 gtk2 (classic)
Encoding: UTF-8
File system encoding: UTF-8
Connection to 127.0.0.1:15411 failed: [Errno 111] Connection refused
Starting up...
Audio module: wx 3.0.2.0
Enumerating display devices and communication ports...
/usr/bin
Argyll CMS 1.8.3
...ok.
Checking video card gamma table access for display 1...
Verify: 'test.cal' IS loaded (discrepancy 0.0%)
...ok.
Initializing GUI...
...ok.
Ready.
Setting up scripting host at 127.0.0.1:15411
Check for application update...
DisplayCAL is up-to-date.
Argyll CMS is up-to-date.
--------------------------------------------------------------------------------
Calibrate & profile
--------------------------------------------------------------------------------
Session log: LP173WF4-SPD1 #1 2016-07-24 12-50 2.2 F-S XYZLUT+MTX.log
Working directory:
/
tmp/
DisplayCAL-g6G0T3/
Command line:
dispcal
-v2
-d1
-c1
-yl
-P0.485587583149,0.397660818713,1.5
-ql
-t
-g2.2
-f1.0
-k0.0
-A4.0
-b
'LP173WF4-SPD1 #1 2016-07-24 12-50 2.2 F-S XYZLUT+MTX'
DisplayCAL: Starting interaction with subprocess
Argyll 'V1.8.3' Build 'Linux 64 bit' System 'Linux #1 SMP Debian
4.6.4-1 (2016-07-18) 4.6.0-1-amd64 x86_64' Setting up the instrument
Place instrument on test window.
DisplayCAL: Waiting for send buffer
DisplayCAL: Sending buffer: ' '
Hit Esc or Q to give up, any other key to continue:
Display type is 'l'
Target white = native white point
Target white brightness = native brightness
Target black brightness = native brightness
Black point device hack is enabled
Target advertised gamma = 2.200000
Display adjustment menu:
Press 1 .. 7
1) Black level (CRT: Offset/Brightness)
2) White point (Color temperature, R,G,B, Gain/Contrast)
3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight)
4) Black point (R,G,B, Offset/Brightness)
5) Check all
6) Measure and set ambient for viewing condition adjustment
7) Continue on to calibration
8) Exit
DisplayCAL: Waiting for send buffer
DisplayCAL: Sending buffer: '3'
Doing some initial measurements
White = XYZ 145.875 318.775 204.001
Adjust CRT Contrast or LCD Brightness to desired level. Press space
when done. Initial 318.78
DisplayCAL: Sending buffer: ' '
/ Current 318.77
Press 1 .. 7
1) Black level (CRT: Offset/Brightness)
2) White point (Color temperature, R,G,B, Gain/Contrast)
3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight)
4) Black point (R,G,B, Offset/Brightness)
5) Check all
6) Measure and set ambient for viewing condition adjustment
7) Continue on to calibration
8) Exit
DisplayCAL: Waiting for send buffer
DisplayCAL: Sending buffer: '7'
Commencing display calibration
Patch 9 of 9
Black = XYZ 0.1940 0.3529 0.4488
Red = XYZ 57.133 64.779 1.762
Green = XYZ 55.394 232.399 6.010
Blue = XYZ 33.218 21.417 196.147
White = XYZ 145.817 318.710 203.938
Segmentation fault
*log from displayca.log*
2016-07-24 12:50:21,905
================================================================================
2016-07-24 12:50:21,906 displaycal 3.1.4.0 2016-07-10T23:58:02.896555Z
2016-07-24 12:50:21,908 debian stretch/sid x86_64 2016-07-24
12:50:21,908 Python 2.7.12 (default, Jun 29 2016, 08:18:26) 2016-07-24
12:50:21,908 [GCC 5.4.0 20160609] 2016-07-24 12:50:21,908 wxPython
3.0.2.0 gtk2 (classic) 2016-07-24 12:50:21,908 Encoding: UTF-8
2016-07-24 12:50:21,908 File system encoding: UTF-8
2016-07-24 12:50:21,909 Connection to 127.0.0.1:15411 failed: [Errno
111] Connection refused 2016-07-24 12:50:22,009 Starting up...
2016-07-24 12:50:22,083 Audio module: wx 3.0.2.0
2016-07-24 12:50:23,481 Enumerating display devices and communication
ports... 2016-07-24 12:50:23,484 /usr/bin
2016-07-24 12:50:24,905 Argyll CMS 1.8.3
2016-07-24 12:50:24,907 ...ok.
2016-07-24 12:50:24,916 Checking video card gamma table access for
display 1... 2016-07-24 12:50:24,948 Verify: 'test.cal' IS loaded
(discrepancy 0.0%) 2016-07-24 12:50:24,956 ...ok.
2016-07-24 12:50:24,956 Initializing GUI...
2016-07-24 12:50:25,007
2016-07-24 12:50:25,542 ...ok.
2016-07-24 12:50:25,544 Ready.
2016-07-24 12:50:25,742 Setting up scripting host at 127.0.0.1:15411
2016-07-24 12:50:25,794 Check for application update...
2016-07-24 12:50:26,250 DisplayCAL is up-to-date.
2016-07-24 12:50:26,896 Argyll CMS is up-to-date.
2016-07-24 12:50:30,955
--------------------------------------------------------------------------------
2016-07-24 12:50:30,956 Calibrate & profile 2016-07-24 12:50:31,528
--------------------------------------------------------------------------------
2016-07-24 12:50:31,528 Session log: LP173WF4-SPD1 #1 2016-07-24 12-50
2.2 F-S XYZLUT+MTX.log 2016-07-24 12:50:31,528 2016-07-24 12:50:31,528
Working directory: 2016-07-24 12:50:31,529 /
2016-07-24 12:50:31,529 tmp/
2016-07-24 12:50:31,530 DisplayCAL-g6G0T3/
2016-07-24 12:50:31,530
2016-07-24 12:50:31,530 Command line:
2016-07-24 12:50:31,530 dispcal
2016-07-24 12:50:31,531 -v2
2016-07-24 12:50:31,531 -d1
2016-07-24 12:50:31,531 -c1
2016-07-24 12:50:31,531 -yl
2016-07-24 12:50:31,532 -P0.485587583149,0.397660818713,1.5
2016-07-24 12:50:31,532 -ql
2016-07-24 12:50:31,532 -t
2016-07-24 12:50:31,532 -g2.2
2016-07-24 12:50:31,532 -f1.0
2016-07-24 12:50:31,532 -k0.0
2016-07-24 12:50:31,533 -A4.0
2016-07-24 12:50:31,533 -b
2016-07-24 12:50:31,533 'LP173WF4-SPD1 #1 2016-07-24 12-50 2.2 F-S
XYZLUT+MTX' 2016-07-24 12:50:31,533
2016-07-24 12:50:31,538 DisplayCAL: Starting interaction with subprocess
2016-07-24 12:50:31,627 Argyll 'V1.8.3' Build 'Linux 64 bit' System
'Linux #1 SMP Debian 4.6.4-1 (2016-07-18) 4.6.0-1-amd64 x86_64'
2016-07-24 12:50:31,628 Setting up the instrument 2016-07-24
12:50:33,131 Place instrument on test window. 2016-07-24 12:50:33,135
DisplayCAL: Waiting for send buffer 2016-07-24 12:50:34,644 DisplayCAL:
Sending buffer: ' ' 2016-07-24 12:50:34,696 Hit Esc or Q to give up,
any other key to continue: 2016-07-24 12:50:34,699 Display type is 'l'
2016-07-24 12:50:34,700 Target white = native white point
2016-07-24 12:50:34,701 Target white brightness = native brightness
2016-07-24 12:50:34,702 Target black brightness = native brightness
2016-07-24 12:50:34,703 Black point device hack is enabled
2016-07-24 12:50:34,704 Target advertised gamma = 2.200000
2016-07-24 12:50:34,704
2016-07-24 12:50:34,704 Display adjustment menu:
2016-07-24 12:50:34,704 Press 1 .. 7
2016-07-24 12:50:34,705 1) Black level (CRT: Offset/Brightness)
2016-07-24 12:50:34,705 2) White point (Color temperature, R,G,B,
Gain/Contrast) 2016-07-24 12:50:34,705 3) White level (CRT:
Gain/Contrast, LCD: Brightness/Backlight) 2016-07-24 12:50:34,707 4)
Black point (R,G,B, Offset/Brightness) 2016-07-24 12:50:34,708 5) Check
all 2016-07-24 12:50:34,708 6) Measure and set ambient for viewing
condition adjustment 2016-07-24 12:50:34,708 7) Continue on to
calibration 2016-07-24 12:50:34,709 8) Exit
2016-07-24 12:50:34,709 DisplayCAL: Waiting for send buffer
2016-07-24 12:50:37,726 DisplayCAL: Sending buffer: '3'
2016-07-24 12:50:37,778 Doing some initial measurements
2016-07-24 12:50:39,529 White = XYZ 145.875 318.775 204.001
2016-07-24 12:50:39,530
2016-07-24 12:50:39,532 Adjust CRT Contrast or LCD Brightness to
desired level. Press space when done. 2016-07-24 12:50:39,533 Initial
318.78 2016-07-24 12:50:48,498 DisplayCAL: Sending buffer: ' '
2016-07-24 12:50:48,698 / Current 318.77
2016-07-24 12:50:48,700
2016-07-24 12:50:48,701 Press 1 .. 7
2016-07-24 12:50:48,702 1) Black level (CRT: Offset/Brightness)
2016-07-24 12:50:48,703 2) White point (Color temperature, R,G,B,
Gain/Contrast) 2016-07-24 12:50:48,704 3) White level (CRT:
Gain/Contrast, LCD: Brightness/Backlight) 2016-07-24 12:50:48,705 4)
Black point (R,G,B, Offset/Brightness) 2016-07-24 12:50:48,706 5) Check
all 2016-07-24 12:50:48,707 6) Measure and set ambient for viewing
condition adjustment 2016-07-24 12:50:48,708 7) Continue on to
calibration 2016-07-24 12:50:48,709 8) Exit
2016-07-24 12:50:48,713 DisplayCAL: Waiting for send buffer
2016-07-24 12:50:52,333 DisplayCAL: Sending buffer: '7'
2016-07-24 12:50:52,386 Commencing display calibration
2016-07-24 12:51:09,641 Patch 9 of 9
2016-07-24 12:51:09,643 Black = XYZ 0.1940 0.3529 0.4488
2016-07-24 12:51:09,644 Red = XYZ 57.133 64.779 1.762
2016-07-24 12:51:09,645 Green = XYZ 55.394 232.399 6.010
2016-07-24 12:51:09,645 Blue = XYZ 33.218 21.417 196.147
2016-07-24 12:51:09,646 White = XYZ 145.817 318.710 203.938
*Colorimeter in use*
First Pantone Huey model
*Video Card*
VGA compatible controller: NVIDIA Corporation GM204M [GeForce GTX 970M]
(rev a1)
Package: nvidia-driver
Version: 352.79-10
I hope this can help to fix it.
Best regards,
Daniel
--- System information. ---
Architecture: amd64
Kernel: Linux 4.6.0-1-amd64
Debian Release: stretch/sid
500 unstable ftp.us.debian.org
500 testing www.deb-multimedia.org
500 testing ftp.us.debian.org
1 experimental ftp.us.debian.org
--- Package information. ---
Depends (Version) | Installed
=================================-+-==============
libc6 (>= 2.4) |
libx11-6 |
libxinerama1 |
libxrandr2 (>= 2:1.2.0) |
libxxf86vm1 |
python (>= 2.7) |
python (<< 2.8) |
python:any (>= 2.6.6-7~) |
python-wxgtk3.0 |
python-numpy |
argyll |
libjs-jquery |
Recommends (Version) | Installed
===================================-+-===========
colord | 1.3.2-1
gir1.2-colordgtk-1.0 | 0.1.26-1
Package's Suggests field is empty.
