Package: hpacucli
Version: 9.40.1-1
Dear Maintainers,
When using hpacucli Debian package on Jessie with Debian backport Kernel
4.5, i am not able to use tool 'hpacucli'.
-§1- global informations
-----------------------
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ uname -a
Linux syspeo 4.5.0-0.bpo.1-amd64 #1 SMP Debian 4.5.1-1~bpo8+1
(2016-04-20) x86_64 GNU/Linux
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ dpkg -l |grep
linux-imag
ii linux-image-4.5.0-0.bpo.1-amd64 4.5.1-1~bpo8+1 amd64
Linux 4.5 for 64-bit PCs
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ cat
/etc/debian_version
8.5
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ ls -altr
/etc/apt/sources.list
-rw-r--r-- 1 root root 0 mai 2 08:19 /etc/apt/sources.list
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ cat
/etc/apt/sources.list.d/sources_debian_jessie_hp_tool_hpacucli.list
# file /etc/apt/sources.list
# from Jean Marc LACROIX (jeanmarc.lacr...@free.fr)
# define external link for Debian packages
# please, look at : https://oitibs.com/install-hp-acu-cli-on-debian/
# in order to install dedicated HP smart raid device controler tools
deb http://downloads.linux.hpe.com/SDR/repo/mcp/ jessie/current non-free
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ sudo dmidecode -s
system-product-name
ProLiant DL360 G6
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ lspci |grep -i smart
03:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6
controllers (rev 01)
-§2- tests
------------
admlocal@syspeo:~$ sudo hpacucli ctrl all show
Error: No controllers detected.
admlocal@syspeo:~$ sudo hpacucli
HP Array Configuration Utility CLI 9.40.12.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.
=> ctrl all show
Error: No controllers detected.
So, according to previous bug
(http://blog.wpkg.org/2012/03/15/hpacucli-error-no-controllers-detected-with-hpsa-module-in-use/),
i have made some test using code defined in uname26.c, but without success.
admlocal@syspeo:~/git/hp_smart_raid_uname26.git/src$ cat uname26.c
/* Copyright (C) 2011 Intel Corporation
Author: Andi Kleen
Set 2.6.x personality
uname26 is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; version
2.
uname26 is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should find a copy of v2 of the GNU General Public License somewhere
on your Linux system; if not, write to the Free Software Foundation,
Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */
#include <sys/personality.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <unistd.h>
#define UNAME26 0x0020000
int main(int ac, char **av)
{
if (!av[1]) {
fprintf(stderr, "Usage: uname26 program ...\n"
"Run program with the uname 2.6
personality\n");
exit(1);
}
if (personality(PER_LINUX | UNAME26) < 0)
perror("personality"), exit(1);
execvp(av[1], av + 1);
fprintf(stderr, "Cannot execute %s: %s\n", av[1], strerror(errno));
exit(1);
}
root@syspeo:/local_home/admlocal/git/hp_smart_raid_uname26.git/src#
./uname26 hpacucli ctrl all show config
Error: No controllers detected.
My modules are defined in attached file (please look at
smod_4.5.0-0.bpo.1-amd64.txt)
lsmod > /tmp/lsmod_4.5.0-0.bpo.1-amd64.txt
# dmidecode -s system-product-name
ProLiant DL360 G6
root@syspeo:/local_home/admlocal/git/hp_smart_raid_uname26.git/src#
dmidecode -s system-manufacturer
HP
# dmidecode | grep -i proliant
Product Name: ProLiant DL360 G6
Family: ProLiant
HP ProLiant Information
-§3- tests with smartmontools
------------------------------
For testing, i am using smartmontools
# dpkg -l |grep smartmon
ii smartmontools 6.4+svn4214-1~bpo8+1 amd64
control and monitor storage systems using S.M.A.R.T.
# cat /etc/default/smartmontools |grep -v "#"
enable_smart="/dev/sda /dev/sdb /dev/sdc /dev/sdd"
start_smartd=yes
smartd_opts="--interval=180"
root@syspeo:~# cat /etc/smartd.conf |grep -v '#'
/dev/sda -d cciss,0 -H -T normal -l selftest -l error -l xerror -f -p -u
-W 2,35,50
/dev/sdb -d cciss,1 -H -T normal -l selftest -l error -l xerror -f -p -u
-W 2,35,50
/dev/sdc -d cciss,2 -H -T normal -l selftest -l error -l xerror -f -p -u
-W 2,35,50
/dev/sdd -d cciss,3 -H -T normal -l selftest -l error -l xerror -f -p -u
-W 2,35,50
My system have 4 SAS disk.............
admlocal@syspeo:~$ sudo smartctl -a -d cciss,0 /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.5.0-0.bpo.1-amd64] (local
build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sda [cciss_disk_00] [SCSI]: Device open changed type from
'sat,auto+cciss' to 'cciss'
=== START OF INFORMATION SECTION ===
Vendor: HP
Product: DG0146FARVU
Revision: HPD6
User Capacity: 146 815 737 856 bytes [146 GB]
Logical block size: 512 bytes
Rotation Rate: 10020 rpm
Form Factor: 2.5 inches
Logical Unit id: 0x5000cca00a809178
Serial number: PCX8PYDE
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Thu Jun 9 08:08:55 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 31 C
Drive Trip Temperature: 70 C
Manufactured in week 18 of year 2010
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 216
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 2551120362733568
Error counter log:
Errors Corrected by Total Correction
Gigabytes Total
ECC rereads/ errors algorithm
processed uncorrected
fast | delayed rewrites corrected invocations [10^9
bytes] errors
read: 0 846 0 846 0 1085,388
0
write: 0 220075 0 220075 0 1422,455
0
Non-medium error count: 354
No self-tests have been logged
admlocal@syspeo:~$ sudo smartctl -a -d cciss,1 /dev/sdb
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.5.0-0.bpo.1-amd64] (local
build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb [cciss_disk_01] [SCSI]: Device open changed type from
'sat,auto+cciss' to 'cciss'
=== START OF INFORMATION SECTION ===
Vendor: HP
Product: DG0146FARVU
Revision: HPD6
User Capacity: 146 815 737 856 bytes [146 GB]
Logical block size: 512 bytes
Rotation Rate: 10020 rpm
Form Factor: 2.5 inches
Logical Unit id: 0x5000cca00a885b8c
Serial number: PCXDZS6E
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Thu Jun 9 08:09:15 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 29 C
Drive Trip Temperature: 70 C
Manufactured in week 18 of year 2010
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 212
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 1844904879718400
Error counter log:
Errors Corrected by Total Correction
Gigabytes Total
ECC rereads/ errors algorithm
processed uncorrected
fast | delayed rewrites corrected invocations [10^9
bytes] errors
read: 0 2661 0 2661 0 4527,527
0
write: 0 120713 0 120713 0 2328,019
0
Non-medium error count: 357
No self-tests have been logged
admlocal@syspeo:~$ sudo smartctl -a -d cciss,2 /dev/sdc
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.5.0-0.bpo.1-amd64] (local
build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdc [cciss_disk_02] [SCSI]: Device open changed type from
'sat,auto+cciss' to 'cciss'
=== START OF INFORMATION SECTION ===
Vendor: HP
Product: DG146BB976
Revision: HPDC
User Capacity: 146 815 737 856 bytes [146 GB]
Logical block size: 512 bytes
Rotation Rate: 10033 rpm
Logical Unit id: 0x5000c5000c98b5a7
Serial number: 3NM6TFY900009904ZSJM
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Thu Jun 9 08:09:34 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 68 C
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 2922697966
Blocks received from initiator = 4178116120
Blocks read from cache and sent to initiator = 158578008
Number of read and write commands whose size <= segment size = 344974087
Number of read and write commands whose size > segment size = 0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 44790,08
number of minutes until next internal SMART test = 45
Error counter log:
Errors Corrected by Total Correction
Gigabytes Total
ECC rereads/ errors algorithm
processed uncorrected
fast | delayed rewrites corrected invocations [10^9
bytes] errors
read: 0 0 0 0 0 0,000
0
write: 0 0 0 0 0 0,000
0
Non-medium error count: 0
No self-tests have been logged
admlocal@syspeo:~$ sudo smartctl -a -d cciss,3 /dev/sdd
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.5.0-0.bpo.1-amd64] (local
build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdd [cciss_disk_03] [SCSI]: Device open changed type from
'sat,auto+cciss' to 'cciss'
=== START OF INFORMATION SECTION ===
Vendor: HP
Product: DG146BB976
Revision: HPDC
User Capacity: 146 815 737 856 bytes [146 GB]
Logical block size: 512 bytes
Rotation Rate: 10033 rpm
Logical Unit id: 0x5000c5000c9945eb
Serial number: 3NM6XGNM00009904J34V
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Thu Jun 9 08:10:14 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 68 C
Elements in grown defect list: 2
Vendor (Seagate) cache information
Blocks sent to initiator = 561321710
Blocks received from initiator = 4254767069
Blocks read from cache and sent to initiator = 426612917
Number of read and write commands whose size <= segment size = 137143616
Number of read and write commands whose size > segment size = 0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 44193,68
number of minutes until next internal SMART test = 59
Error counter log:
Errors Corrected by Total Correction
Gigabytes Total
ECC rereads/ errors algorithm
processed uncorrected
fast | delayed rewrites corrected invocations [10^9
bytes] errors
read: 0 0 0 0 0 0,000
0
write: 0 0 0 0 0 0,000
0
Non-medium error count: 0
No self-tests have been logged
-§4- mdadm & raid config
-------------------------
admlocal@syspeo:~$ cat /proc/mdstat
Personalities : [raid1]
md2 : active raid1 sdd1[1] sdc1[2]
143206464 blocks super 1.2 [2/2] [UU]
bitmap: 0/2 pages [0KB], 65536KB chunk
md1 : active raid1 sda5[0] sdb5[1]
138323968 blocks super 1.2 [2/2] [UU]
bitmap: 1/2 pages [4KB], 65536KB chunk
md0 : active raid1 sda1[2] sdb1[3]
4877312 blocks super 1.2 [2/2] [UU]
admlocal@syspeo:~$ sudo mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Thu Mar 31 23:38:26 2016
Raid Level : raid1
Array Size : 4877312 (4.65 GiB 4.99 GB)
Used Dev Size : 4877312 (4.65 GiB 4.99 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Thu Jun 9 08:18:58 2016
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : syspeo:0 (local to host syspeo)
UUID : 0622ddc4:c8b7bd03:12855b40:82c2e595
Events : 3870
Number Major Minor RaidDevice State
2 8 1 0 active sync /dev/sda1
3 8 17 1 active sync /dev/sdb1
admlocal@syspeo:~$ sudo mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Thu Mar 31 23:38:26 2016
Raid Level : raid1
Array Size : 4877312 (4.65 GiB 4.99 GB)
Used Dev Size : 4877312 (4.65 GiB 4.99 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Thu Jun 9 08:18:58 2016
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : syspeo:0 (local to host syspeo)
UUID : 0622ddc4:c8b7bd03:12855b40:82c2e595
Events : 3870
Number Major Minor RaidDevice State
2 8 1 0 active sync /dev/sda1
3 8 17 1 active sync /dev/sdb1
-§5- Conclusions
----------------
My config use LVM+mdadm on raid1 (with mdadm). As i can not use
hpacmcli, then it is not possible to change my disk at runing time (hot
swap)
Many thanks in advance for your help
--
--------------------------------------
-- Jean-Marc LACROIX --
-- mailto : jeanmarc.lacr...@free.fr --
---------------------------------------
Module Size Used by
nls_utf8 16384 2
btrfs 1003520 0
xor 24576 1 btrfs
raid6_pq 102400 1 btrfs
ufs 73728 0
qnx4 16384 0
hfsplus 102400 0
hfs 57344 0
minix 40960 0
ntfs 102400 0
vfat 20480 0
msdos 20480 0
fat 69632 2 vfat,msdos
jfs 180224 0
xfs 978944 0
libcrc32c 16384 1 xfs
crc32c_generic 16384 0
cpuid 16384 0
uas 24576 0
usb_storage 69632 1 uas
rpcsec_gss_krb5 36864 0
nfsv4 552960 0
dns_resolver 16384 1 nfsv4
fuse 98304 0
bluetooth 516096 0
rfkill 24576 1 bluetooth
binfmt_misc 20480 1
veth 16384 0
bridge 118784 0
amdkfd 122880 1
radeon 1499136 1
coretemp 16384 0
kvm_intel 184320 0
ttm 94208 1 radeon
drm_kms_helper 143360 1 radeon
drm 356352 4 ttm,drm_kms_helper,radeon
kvm 557056 1 kvm_intel
i2c_algo_bit 16384 1 radeon
hpilo 20480 0
iTCO_wdt 16384 0
serio_raw 16384 0
hpwdt 16384 0
evdev 24576 4
pcspkr 16384 0
acpi_power_meter 20480 0
iTCO_vendor_support 16384 1 iTCO_wdt
8250_fintek 16384 0
ipmi_si 57344 0
ipmi_msghandler 49152 1 ipmi_si
irqbypass 16384 1 kvm
i7core_edac 24576 0
button 16384 0
lpc_ich 24576 0
pcc_cpufreq 16384 0
shpchp 36864 0
edac_core 57344 2 i7core_edac
mfd_core 16384 1 lpc_ich
acpi_cpufreq 20480 0
tpm_tis 20480 0
tpm 45056 1 tpm_tis
processor 36864 1 acpi_cpufreq
nfsd 323584 27
auth_rpcgss 57344 2 nfsd,rpcsec_gss_krb5
nfsv3 40960 0
nfs_acl 16384 2 nfsd,nfsv3
nfsv2 24576 0
nfs 253952 3 nfsv2,nfsv3,nfsv4
lockd 90112 4 nfs,nfsd,nfsv2,nfsv3
grace 16384 2 nfsd,lockd
sunrpc 331776 44
nfs,nfsd,rpcsec_gss_krb5,auth_rpcgss,lockd,nfsv2,nfsv3,nfsv4,nfs_acl
fscache 61440 2 nfs,nfsv4
8021q 28672 0
garp 16384 1 8021q
mrp 20480 1 8021q
stp 16384 2 garp,bridge
llc 16384 3 stp,garp,bridge
autofs4 40960 35
ext4 598016 89
crc16 16384 2 ext4,bluetooth
mbcache 20480 1 ext4
jbd2 110592 1 ext4
dm_mod 110592 285
raid1 36864 3
md_mod 131072 4 raid1
sr_mod 24576 0
cdrom 57344 1 sr_mod
ata_generic 16384 0
hid_generic 16384 0
usbhid 49152 0
hid 118784 2 hid_generic,usbhid
sg 32768 0
sd_mod 49152 10
crc32c_intel 24576 2
psmouse 122880 0
uhci_hcd 45056 0
ehci_pci 16384 0
ata_piix 36864 0
ehci_hcd 77824 1 ehci_pci
libata 237568 2 ata_generic,ata_piix
usbcore 241664 6
uas,uhci_hcd,usb_storage,ehci_hcd,ehci_pci,usbhid
hpsa 98304 6
scsi_transport_sas 45056 1 hpsa
usb_common 16384 1 usbcore
bnx2 86016 0
scsi_mod 229376 8
sg,uas,hpsa,scsi_transport_sas,usb_storage,libata,sd_mod,sr_mod
thermal 20480 0
fjes 28672 0
