Package: src:linux Version: 4.5.1-1 Severity: normal Dear Maintainer,
* What led up to the situation? Upgrading to newer 4.x kernel versions * What exactly did you do (or not do) that was effective (or ineffective)? "" * What was the outcome of this action? Asus MyCinema U3100 Mini Plus V2 USB DVB-T Stick won't work any longer. It is recognised by the kernel, but Me-TV won't recognise it. * What outcome did you expect instead? Working DVB-T stick since newer kernel versions (actually using linux kernel v4.5) my Asus MyCinema U3100 Mini Plus V2 USB DVB-T Stick won't work any longer. Here is the output of syslog: Apr 30 05:34:14 g6 kernel: [ 6036.453857] usb 2-2.3: USB disconnect, device number 5 Apr 30 05:34:15 g6 kernel: [ 6037.615546] usb 2-2.3: new high-speed USB device number 11 using xhci_hcd Apr 30 05:34:15 g6 kernel: [ 6037.718847] usb 2-2.3: New USB device found, idVendor=1b80, idProduct=d3a8 Apr 30 05:34:15 g6 kernel: [ 6037.718853] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 30 05:34:15 g6 kernel: [ 6037.718855] usb 2-2.3: Product: Rtl2832UDVB Apr 30 05:34:15 g6 kernel: [ 6037.718857] usb 2-2.3: Manufacturer: Realtek Apr 30 05:34:15 g6 mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1c.0/0000:10:00.0/usb2/2-2/2-2.3" Apr 30 05:34:15 g6 mtp-probe: bus: 2, device: 11 was not an MTP device The USB DVB-T stick is recognised but Me-TV shows no tuner found. Worked fine before on older kernel versions. Thank you very much for your kind reply. With many freetings, Adrian Immanuel Kieß http://www.immanuelK.net -- Package-specific info: ** Version: Linux version 4.5.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 5.3.1 20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14) ** Command line: BOOT_IMAGE=/vmlinuz-4.5.0-1-amd64 root=UUID=96d5fdb9-5d4e-46f2-89e3-34fcfc7bfe14 ro splash vga=795 splash vga=775 resume=/dev/sdc2 ** Tainted: E (8192) * Unsigned module has been loaded (currently expected). ** Kernel log: [ 16.174129] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2 [ 16.174131] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found [ 16.281385] usbcore: registered new interface driver snd-usb-audio [ 16.325945] iTCO_vendor_support: vendor-support=0 [ 16.326633] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 16.326664] iTCO_wdt: Found a 3420 TCO device (Version=2, TCOBASE=0x1060) [ 16.326686] watchdog: iTCO_wdt: cannot register miscdev on minor=130 (err=-16). [ 16.326686] watchdog: iTCO_wdt: a legacy watchdog module is probably present. [ 16.326734] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 16.788687] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr [ 16.940535] Adding 34814972k swap on /dev/sdd2. Priority:100 extents:1 across:34814972k FS [ 16.983627] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: user_xattr [ 34.930411] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr [ 38.474404] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: user_xattr,usrquota [ 39.014054] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.534567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 39.542180] Bluetooth: BNEP filters: protocol multicast [ 39.549881] Bluetooth: BNEP socket layer initialized [ 40.550931] tg3 0000:1e:00.0 eth0: Link is up at 100 Mbps, full duplex [ 40.558823] tg3 0000:1e:00.0 eth0: Flow control is on for TX and on for RX [ 40.558842] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.610426] traps: atop[1476] trap divide error ip:4073c2 sp:7fff5b974970 error:0 in atop[400000+26000] [ 44.727068] usblp1: removed [ 44.728722] usblp 1-1.5:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3268 [ 49.383902] RPC: Registered named UNIX socket transport module. [ 49.383906] RPC: Registered udp transport module. [ 49.383908] RPC: Registered tcp transport module. [ 49.383909] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 49.398337] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 49.412465] audit: netlink_unicast sending to audit_pid=0 returned error: -111 [ 49.412471] audit: type=1302 audit(1461981267.051:64661): item=0 name="/usr/lib/pymodules/python2.7/apport_python_hook.pyc" nametype=UNKNOWN [ 49.412473] audit: type=1327 audit(1461981267.051:64661): proctitle=2F62696E2F7368002F6574632F696E69742E642F73616D62612D61642D6463007374617274 [ 49.412475] audit: type=1300 audit(1461981267.051:64662): arch=c000003e syscall=2 success=no exit=-2 a0=205f770 a1=0 a2=1b6 a3=0 items=1 ppid=2172 pid=2177 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="samba-tool" exe="/usr/bin/python2.7" key=(null) [ 49.412476] audit: type=1307 audit(1461981267.051:64662): cwd="/" [ 49.412478] audit: type=1302 audit(1461981267.051:64662): item=0 name="/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/apport_python_hook.x86_64-linux-gnu.so" nametype=UNKNOWN [ 49.412479] audit: type=1327 audit(1461981267.051:64662): proctitle=2F62696E2F7368002F6574632F696E69742E642F73616D62612D61642D6463007374617274 [ 49.412481] audit: type=1300 audit(1461981267.051:64663): arch=c000003e syscall=2 success=no exit=-2 a0=205f770 a1=0 a2=1b6 a3=0 items=1 ppid=2172 pid=2177 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="samba-tool" exe="/usr/bin/python2.7" key=(null) [ 49.412483] audit: type=1307 audit(1461981267.051:64663): cwd="/" [ 49.412484] audit: type=1302 audit(1461981267.051:64663): item=0 name="/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/apport_python_hook.so" nametype=UNKNOWN [ 49.412486] audit: type=1327 audit(1461981267.051:64663): proctitle=2F62696E2F7368002F6574632F696E69742E642F73616D62612D61642D6463007374617274 [ 49.449284] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 49.450206] NFSD: starting 90-second grace period (net ffffffff81ad8140) [ 50.053168] usb 2-2.1: USB disconnect, device number 4 [ 50.053173] usb 2-2.1.1: USB disconnect, device number 6 [ 50.128390] usb 2-2.1.2: USB disconnect, device number 7 [ 50.130117] ip_tables: (C) 2000-2006 Netfilter Core Team [ 50.150396] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 50.185605] Ebtables v2.0 registered [ 50.433576] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 50.442222] tun: Universal TUN/TAP device driver, 1.6 [ 50.442225] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 50.504476] device virbr0-nic entered promiscuous mode [ 50.651602] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 50.687078] virbr0: port 1(virbr0-nic) entered listening state [ 50.687092] virbr0: port 1(virbr0-nic) entered listening state [ 50.729291] virbr0: port 1(virbr0-nic) entered disabled state [ 50.732137] device virbr0-nic left promiscuous mode [ 50.732154] virbr0: port 1(virbr0-nic) entered disabled state [ 50.804467] usb 2-2.1: new high-speed USB device number 8 using xhci_hcd [ 50.893519] usb 2-2.1: New USB device found, idVendor=03f0, idProduct=2824 [ 50.893524] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 50.894961] hub 2-2.1:1.0: USB hub found [ 50.895291] hub 2-2.1:1.0: 2 ports detected [ 51.172398] usb 2-2.1.1: new low-speed USB device number 9 using xhci_hcd [ 51.286731] usb 2-2.1.1: New USB device found, idVendor=03f0, idProduct=1198 [ 51.286738] usb 2-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 51.286742] usb 2-2.1.1: Product: HP USB 1000dpi Laser Mouse [ 51.286745] usb 2-2.1.1: Manufacturer: HP [ 51.293437] input: HP HP USB 1000dpi Laser Mouse as /devices/pci0000:00/0000:00:1c.0/0000:10:00.0/usb2/2-2/2-2.1/2-2.1.1/2-2.1.1:1.0/0003:03F0:1198.0008/input/input9 [ 51.348713] hid-generic 0003:03F0:1198.0008: input,hidraw3: USB HID v2.00 Mouse [HP HP USB 1000dpi Laser Mouse] on usb-0000:10:00.0-2.1.1/input0 [ 51.352602] hid-generic 0003:03F0:1198.0009: hiddev0,hidraw4: USB HID v2.00 Device [HP HP USB 1000dpi Laser Mouse] on usb-0000:10:00.0-2.1.1/input1 [ 51.424377] usb 2-2.1.2: new full-speed USB device number 10 using xhci_hcd [ 51.541558] usb 2-2.1.2: New USB device found, idVendor=03f0, idProduct=164a [ 51.541564] usb 2-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7 [ 51.541566] usb 2-2.1.2: Product: HP SC Keyboard - Apollo (Liteon) [ 51.541568] usb 2-2.1.2: Manufacturer: Liteon [ 51.541570] usb 2-2.1.2: SerialNumber: 05071300005626 [ 51.548668] input: Liteon HP SC Keyboard - Apollo (Liteon) as /devices/pci0000:00/0000:00:1c.0/0000:10:00.0/usb2/2-2/2-2.1/2-2.1.2/2-2.1.2:1.0/0003:03F0:164A.000A/input/input10 [ 51.604897] hid-generic 0003:03F0:164A.000A: input,hidraw5: USB HID v1.10 Keyboard [Liteon HP SC Keyboard - Apollo (Liteon)] on usb-0000:10:00.0-2.1.2/input0 [ 51.611494] input: Liteon HP SC Keyboard - Apollo (Liteon) as /devices/pci0000:00/0000:00:1c.0/0000:10:00.0/usb2/2-2/2-2.1/2-2.1.2/2-2.1.2:1.2/0003:03F0:164A.000B/input/input11 [ 51.664876] hid-generic 0003:03F0:164A.000B: input,hidraw6: USB HID v1.10 Device [Liteon HP SC Keyboard - Apollo (Liteon)] on usb-0000:10:00.0-2.1.2/input2 [ 66.192467] Bluetooth: RFCOMM TTY layer initialized [ 66.192475] Bluetooth: RFCOMM socket layer initialized [ 66.192479] Bluetooth: RFCOMM ver 1.11 [ 84.190980] input: 00:22:37:0B:3B:AF as /devices/virtual/input/input12 [ 275.087283] ata1.00: configured for UDMA/133 [ 275.087288] ata1: EH complete [ 275.091331] ata2.00: configured for UDMA/133 [ 275.091346] ata2: EH complete [ 275.095390] ata3.00: configured for UDMA/100 [ 275.095395] ata3: EH complete [ 714.840411] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 3774.574528] show_signal_msg: 156 callbacks suppressed [ 3774.574534] polari[821]: segfault at 0 ip 00007f86599eced2 sp 00007ffe091557e0 error 4 in libgjs.so.0.0.0[7f86599ba000+88000] [ 6036.453857] usb 2-2.3: USB disconnect, device number 5 [ 6037.615546] usb 2-2.3: new high-speed USB device number 11 using xhci_hcd [ 6037.718847] usb 2-2.3: New USB device found, idVendor=1b80, idProduct=d3a8 [ 6037.718853] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6037.718855] usb 2-2.3: Product: Rtl2832UDVB [ 6037.718857] usb 2-2.3: Manufacturer: Realtek ** Model information sys_vendor: HP product_name: ProLiant ML110 G6 product_version: chassis_vendor: HP chassis_version: N/A bios_vendor: HP bios_version: O27 board_vendor: Wistron Corporation board_name: ProLiant ML110 G6 board_version: ** Loaded modules: uinput(E) rfcomm(E) xt_CHECKSUM(E) iptable_mangle(E) ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) iptable_nat(E) nf_nat_ipv4(E) nf_nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) xt_conntrack(E) nf_conntrack(E) ipt_REJECT(E) nf_reject_ipv4(E) xt_tcpudp(E) tun(E) bridge(E) stp(E) llc(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) cpufreq_conservative(E) cpufreq_userspace(E) cpufreq_powersave(E) cpufreq_stats(E) bnep(E) binfmt_misc(E) quota_v2(E) quota_tree(E) iTCO_wdt(E) iTCO_vendor_support(E) joydev(E) snd_usb_audio(E) snd_usbmidi_lib(E) snd_hwdep(E) snd_rawmidi(E) snd_seq_device(E) snd_pcm(E) usblp(E) snd_timer(E) snd(E) soundcore(E) btusb(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) rfkill(E) evdev(E) kvm_intel(E) kvm(E) irqbypass(E) pcspkr(E) sg(E) i2c_i801(E) lpc_ich(E) mfd_core(E) 8250_fintek(E) shpchp(E) button(E) acpi_cpufreq(E) tpm_tis(E) tpm(E) processor(E) dm_mod(E) cuse(E) fuse(E) coretemp(E) loop(E) ipmi_watchdog(E) ipmi_si(E) ipmi_poweroff(E) ipmi_devintf(E) ipmi_msghandler(E) parport_pc(E) ppdev(E) lp(E) parport(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) btrfs(E) crc32c_generic(E) xor(E) raid6_pq(E) uhci_hcd(E) sr_mod(E) cdrom(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) uas(E) usb_storage(E) radeon(E) ahci(E) i2c_algo_bit(E) libahci(E) xhci_pci(E) drm_kms_helper(E) tg3(E) ehci_pci(E) libata(E) xhci_hcd(E) ptp(E) ehci_hcd(E) pps_core(E) ttm(E) scsi_mod(E) libphy(E) crc32c_intel(E) usbcore(E) usb_common(E) drm(E) fjes(E) ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d130] (rev 11) Subsystem: Hewlett-Packard Company Core Processor DMI [103c:3318] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d1900000-d19fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [103c:3118] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d1e02000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d1b00000-d1bfffff Prefetchable memory behind bridge: 00000000d1c00000-00000000d1dfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode]) Physical Slot: 1 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 16 Bus: primary=00, secondary=1a, subordinate=1a, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d1f00000-d20fffff Prefetchable memory behind bridge: 00000000d2100000-00000000d22fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode]) Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d1000000-d18fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode]) Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 19 Bus: primary=00, secondary=1e, subordinate=1e, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: d1a00000-d1afffff Prefetchable memory behind bridge: 00000000d2300000-00000000d24fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode]) Physical Slot: 1 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: d2500000-d26fffff Prefetchable memory behind bridge: 00000000d2700000-00000000d28fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [103c:3118] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at d1e03000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=30, subordinate=30, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 3400 Series Chipset LPC Interface Controller [8086:3b14] (rev 05) Subsystem: Hewlett-Packard Company 3420 Chipset LPC Interface Controller [103c:3118] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [103c:3118] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 33 Region 0: I/O ports at 1830 [size=8] Region 1: I/O ports at 1824 [size=4] Region 2: I/O ports at 1828 [size=8] Region 3: I/O ports at 1820 [size=4] Region 4: I/O ports at 1800 [size=32] Region 5: Memory at d1e04000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: Hewlett-Packard Company 5 Series/3400 Series Chipset SMBus Controller [103c:3318] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at d1e05000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1840 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV516 GL [FireMV 2250] [1002:719b] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV516 GL [FireMV 2250] [1002:0602] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at d1900000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at 2000 [size=256] [virtual] Expansion ROM at d1920000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] RV516 GL [FireMV 2250] (Secondary) [1002:71bb] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV516 GL [FireMV 2250] (Secondary) [1002:0603] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Region 0: Memory at d1910000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 10:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI]) Subsystem: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d1b00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 1e:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe [14e4:165b] (rev 10) Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express Gigabit Server Adapter [103c:705d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 34 Region 0: Memory at d1a00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 ** USB devices: Bus 004 Device 004: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0 Bus 004 Device 003: ID 0000:0000 Bus 004 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 003: ID 05e3:0612 Genesys Logic, Inc. Bus 003 Device 004: ID 0bc2:3312 Seagate RSS LLC SRD00F2 Expansion Desktop Drive (STBV) Bus 003 Device 002: ID 05e3:0612 Genesys Logic, Inc. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 011: ID 1b80:d3a8 Afatech Bus 002 Device 010: ID 03f0:164a Hewlett-Packard Bus 002 Device 009: ID 03f0:1198 Hewlett-Packard HID-compliant mouse Bus 002 Device 008: ID 03f0:2824 Hewlett-Packard Bus 002 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 0b05:1743 ASUSTek Computer, Inc. Xonar U1 Audio Station Bus 001 Device 004: ID 04e8:3268 Samsung Electronics Co., Ltd ML-1610 Mono Laser Printer Bus 001 Device 003: ID 04a9:1909 Canon, Inc. CanoScan LiDE 110 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (900, 'testing'), (300, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.5.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.5.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.59 ii initramfs-tools [linux-initramfs-tool] 0.125 ii kmod 22-1.1 ii linux-base 4.0 Versions of packages linux-image-4.5.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.5.0-1-amd64 suggests: ii debian-kernel-handbook 1.0.17 ii extlinux 3:6.03+dfsg-11 ii grub-pc 2.02~beta2-36 pn linux-doc-4.5 <none> Versions of packages linux-image-4.5.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 20160110-1 ii firmware-linux-nonfree 20160110-1 ii firmware-misc-nonfree [firmware-ralink] 20160110-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-realtek 20160110-1 pn xen-hypervisor <none> -- debconf information: linux-image-4.5.0-1-amd64/prerm/removing-running-kernel-4.5.0-1-amd64: true