Package: src:linux
Version: 4.5.1-1
Severity: normal
File: /lib/modules/4.5.0-1-amd64/kernel/drivers/acpi/thermal.ko
thermal: module verification failed: signature and/or required key
missing - tainting kernel
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (51 C)
Not sure how to check if the module is signed... but maybe it somehow
got built w/o a signature?
-- Package-specific info:
** Version:
Linux version 4.5.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 5.3.1
20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)
** Command line:
BOOT_IMAGE=/vmlinuz-4.5.0-1-amd64 root=/dev/mapper/Heisenberg-root ro
pcie_aspm=force cgroup_enable=memory zswap.enabled=1
** Tainted: UE (8256)
* Userspace-defined naughtiness.
* Unsigned module has been loaded (currently expected).
** Kernel log:
[ 28.505346] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 28.561010] psmouse serio4: elantech: assuming hardware version 2 (with
firmware version 0x040101)
[ 28.597299] iTCO_vendor_support: vendor-support=0
[ 28.598413] psmouse serio4: elantech: Synaptics capabilities query result
0x7e, 0x13, 0x0d.
[ 28.614556] atl1c 0000:03:00.0 enp3s0: renamed from eth0
[ 28.636835] psmouse serio4: elantech: Elan sample query result 19, 00, 00
[ 28.668959] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 28.671144] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 28.674102] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 28.716702] ath: phy0: ASPM enabled: 0x42
[ 28.718782] ath: EEPROM regdomain: 0x60
[ 28.718785] ath: EEPROM indicates we should expect a direct regpair map
[ 28.718789] ath: Country alpha2 being used: 00
[ 28.718792] ath: Regpair used: 0x60
[ 28.765812] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.766286] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900008a0000,
irq=17
[ 28.825291] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio4/input/input14
[ 29.573883] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 31.080937] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 31.083098] scsi host4: usb-storage 4-1:1.0
[ 31.085275] usbcore: registered new interface driver usb-storage
[ 31.385783] media: Linux media interface: v0.10
[ 31.409793] Linux video capture interface: v2.00
[ 31.493641] Adding 3903484k swap on /dev/mapper/Heisenberg-swap.
Priority:-1 extents:1 across:3903484k FS
[ 31.834682] uvcvideo: Found UVC 1.00 device USB2.0 0.3M UVC WebCam
(04f2:b036)
[ 31.840506] uvcvideo 3-3:1.0: Entity type for entity Extension 5 was not
initialized!
[ 31.842652] uvcvideo 3-3:1.0: Entity type for entity Extension 4 was not
initialized!
[ 31.844745] uvcvideo 3-3:1.0: Entity type for entity Processing 3 was not
initialized!
[ 31.846830] uvcvideo 3-3:1.0: Entity type for entity Camera 1 was not
initialized!
[ 31.849076] input: USB2.0 0.3M UVC WebCam as
/devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input18
[ 31.851337] usbcore: registered new interface driver uvcvideo
[ 31.853516] USB Video Class driver (1.1.1)
[ 32.086377] scsi 4:0:0:0: CD-ROM TSSTcorp BDDVDW SE-506BB TS00
PQ: 0 ANSI: 0
[ 32.090790] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 32.315246] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 32.317613] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 32.320239] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 32.794034] EXT4-fs (dm-3): barriers disabled
[ 32.849358] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
user_xattr,errors=remount-ro
[ 32.851905] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
errors=remount-ro,journal_async_commit,barrier=0,commit=600
[ 33.025058] usb 4-2: reset high-speed USB device number 3 using ehci-pci
[ 33.165602] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222
detected
[ 33.196099] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 33.199426] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 33.199969] usbcore: registered new interface driver rt2800usb
[ 33.206943] rt2800usb 4-2:1.0 wlxe8de2708b22a: renamed from wlan0
[ 37.224612] FS-Cache: Loaded
[ 37.250867] CacheFiles: Loaded
[ 41.423577] FS-Cache: Cache "mycache" added (type cachefiles)
[ 41.425256] CacheFiles: File cache on dm-3 registered
[ 52.828135] IPv6: ADDRCONF(NETDEV_UP): wlxe8de2708b22a: link is not ready
[ 52.828221] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2870.bin'
[ 52.910385] rt2800usb 4-2:1.0: firmware: direct-loading firmware rt2870.bin
[ 52.910399] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.29
[ 53.218648] IPv6: ADDRCONF(NETDEV_UP): wlxe8de2708b22a: link is not ready
[ 53.225601] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 53.240551] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 53.246697] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 53.261800] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 54.866526] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 54.881219] IPv6: ADDRCONF(NETDEV_UP): wlxe8de2708b22a: link is not ready
[ 61.707622] wlxe8de2708b22a: authenticate with 54:04:a6:d3:42:0d
[ 61.758685] wlxe8de2708b22a: send auth to 54:04:a6:d3:42:0d (try 1/3)
[ 61.759192] wlxe8de2708b22a: authenticated
[ 61.768050] wlxe8de2708b22a: associate with 54:04:a6:d3:42:0d (try 1/3)
[ 61.768940] wlxe8de2708b22a: RX AssocResp from 54:04:a6:d3:42:0d
(capab=0x831 status=0 aid=1)
[ 61.779423] wlxe8de2708b22a: associated
[ 61.779444] IPv6: ADDRCONF(NETDEV_CHANGE): wlxe8de2708b22a: link becomes
ready
[ 61.787483] ath: EEPROM regdomain: 0x8348
[ 61.787490] ath: EEPROM indicates we should expect a country code
[ 61.787493] ath: doing EEPROM country->regdmn map search
[ 61.787496] ath: country maps to regdmn code: 0x3a
[ 61.787498] ath: Country alpha2 being used: US
[ 61.787500] ath: Regpair used: 0x3a
[ 61.787503] ath: regdomain 0x8348 dynamically updated by country IE
[ 62.610924] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 101.291567] wlxe8de2708b22a: authenticate with 14:dd:a9:99:9e:64
[ 101.342935] wlxe8de2708b22a: send auth to 14:dd:a9:99:9e:64 (try 1/3)
[ 101.381195] wlxe8de2708b22a: send auth to 14:dd:a9:99:9e:64 (try 2/3)
[ 101.411694] wlxe8de2708b22a: send auth to 14:dd:a9:99:9e:64 (try 3/3)
[ 101.441073] wlxe8de2708b22a: authentication with 14:dd:a9:99:9e:64 timed out
[ 101.810855] wlxe8de2708b22a: authenticate with 54:04:a6:d3:42:0d
[ 101.906832] wlxe8de2708b22a: send auth to 54:04:a6:d3:42:0d (try 1/3)
[ 101.916387] wlxe8de2708b22a: authenticated
[ 101.920210] wlxe8de2708b22a: associate with 54:04:a6:d3:42:0d (try 1/3)
[ 101.921948] wlxe8de2708b22a: RX AssocResp from 54:04:a6:d3:42:0d
(capab=0x831 status=0 aid=1)
[ 101.933446] wlxe8de2708b22a: associated
[ 101.939162] ath: EEPROM regdomain: 0x8348
[ 101.939168] ath: EEPROM indicates we should expect a country code
[ 101.939171] ath: doing EEPROM country->regdmn map search
[ 101.939174] ath: country maps to regdmn code: 0x3a
[ 101.939176] ath: Country alpha2 being used: US
[ 101.939178] ath: Regpair used: 0x3a
[ 101.939182] ath: regdomain 0x8348 dynamically updated by country IE
[ 201.264190] EXT4-fs (sda2): mounting ext2 file system using the ext4
subsystem
[ 201.274280] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 475.232628] kactivitymanage[2110]: segfault at 7fdfbb8fbcd0 ip
00007fdfa09cf261 sp 00007ffe597007d8 error 4 in
libQt5Sql.so.5.5.1[7fdfa09bb000+3f000]
[ 486.500174] usb 4-1: USB disconnect, device number 2
[ 486.500734] cdrom: issuing MRW background format suspend
[ 675.648212] perf interrupt took too long (2506 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: UL30A
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: 212
board_vendor: ASUSTeK Computer Inc.
board_name: UL30A
board_version: 1.0
** Loaded modules:
hmac(E)
drbg(E)
ansi_cprng(E)
ctr(E)
ccm(E)
cpufreq_stats(E)
cpufreq_powersave(E)
cpufreq_userspace(E)
cpufreq_conservative(E)
cachefiles(E)
fscache(E)
rt2800usb(E)
rt2x00usb(E)
rt2800lib(E)
rt2x00lib(E)
crc_ccitt(E)
sr_mod(E)
cdrom(E)
uvcvideo(E)
videobuf2_vmalloc(E)
videobuf2_memops(E)
videobuf2_v4l2(E)
videobuf2_core(E)
videodev(E)
media(E)
usb_storage(E)
joydev(E)
arc4(E)
iTCO_wdt(E)
ath9k(E)
ath9k_common(E)
iTCO_vendor_support(E)
ath9k_hw(E)
ath(E)
kvm_intel(E)
mac80211(E)
kvm(E)
snd_hda_codec_hdmi(E)
snd_hda_codec_realtek(E)
snd_hda_codec_generic(E)
irqbypass(E)
psmouse(E)
cfg80211(E)
snd_hda_intel(E)
pcspkr(E)
snd_hda_codec(E)
sg(E)
snd_hda_core(E)
lpc_ich(E)
snd_hwdep(E)
snd_pcm(E)
i915(E)
mfd_core(E)
snd_timer(E)
atl1c(E)
snd(E)
ehci_pci(E)
uhci_hcd(E)
ehci_hcd(E)
shpchp(E)
asus_laptop(E)
sparse_keymap(E)
rfkill(E)
input_polldev(E)
soundcore(E)
usbcore(E)
usb_common(E)
drm_kms_helper(E)
drm(E)
i2c_algo_bit(E)
battery(E)
fjes(E)
video(E)
ac(E)
button(E)
acpi_cpufreq(E)
tpm_tis(E)
tpm(E)
processor(E)
tcp_illinois(E)
coretemp(E)
loop(E)
autofs4(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
crc32c_generic(E)
cbc(E)
dm_crypt(E)
dm_mod(E)
md_mod(E)
sd_mod(E)
ahci(E)
libahci(E)
libata(E)
scsi_mod(E)
evdev(E)
serio_raw(E)
thermal(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: ASUSTeK Computer Inc. Mobile 4 Series Chipset Memory
Controller Hub [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Mobile 4 Series Chipset Integrated
Graphics Controller [1043:1862]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: ASUSTeK Computer Inc. Mobile 4 Series Chipset Integrated
Graphics Controller [1043:1862]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB2 EHCI
Controller [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe9fbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) HD Audio
Controller [1043:1443]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000bde00000-00000000bdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB UHCI
Controller [1043:1c47]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. 82801I (ICH9 Family) USB2 EHCI
Controller [1043:1c47]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe9fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller
[8086:2917] (rev 03)
Subsystem: ASUSTeK Computer Inc. ICH9M-E LPC Interface Controller
[1043:1c47]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E)
4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. 82801IBM/IEM (ICH9M/ICH9M-E) 4 port
SATA Controller [AHCI mode] [1043:1c47]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=32]
Region 5: Memory at fe9fb000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network
Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or
Half-size Mini PCIe Card [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8132 Fast Ethernet
[1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. AR8132 Fast Ethernet [1043:14e5]
Physical Slot: 0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
** USB devices:
Bus 004 Device 003: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless
Adapter
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04f2:b036 Chicony Electronics Co., Ltd Asus Integrated
0.3M UVC Webcam
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing'), (150, 'unstable'), (125, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.5.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.5.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.0
Versions of packages linux-image-4.5.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.5.0-1-amd64 suggests:
ii debian-kernel-handbook 1.0.17
ii grub-pc 2.02~beta2-36
ii linux-doc-4.5 4.5.1-1
Versions of packages linux-image-4.5.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree [firmware-ralink] 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.5.0-1-amd64/prerm/removing-running-kernel-4.5.0-1-amd64: true
