Package: pulseaudio
Version: 8.0-1
Severity: normal
I have a Multitech The Block 4.0 bluetooth speaker. I've followed
<https://wiki.debian.org/BluetoothUser/a2dp>, including adding
'load-module module-switch-on-connect' to /etc/pulse/default.pa and it
basically now works.
However, if I turn the speaker off and then back on later, I have to
restart pulseaudio (killall pulseaudio) to be able to use it. It shows
up in pavucontrol's Configuration tab, but its Profile is "Off" there.
If I change it (to A2DP Sink) it still doesnt show up in Output Devices,
and if I reload pavucontrol I find the profile has changed back to Off.
After pulseaudio is killed and restarted the speaker chimes (presumably
to indicate the laptop has just connected) and becomes available as an
output device.
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'unstable'),
(500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.114
ii libasound2 1.1.0-1
ii libasound2-plugins 1.1.0-1
ii libc6 2.22-3
ii libcap2 1:2.24-12
ii libdbus-1-3 1.10.8-1
ii libfftw3-single3 3.3.4-2+b1
ii libgcc1 1:5.3.1-11
ii libice6 2:1.0.9-1+b1
ii libltdl7 2.4.6-0.1
ii liborc-0.4-0 1:0.4.25-1
ii libpulse0 8.0-1
ii libsm6 2:1.2.2-1+b1
ii libsndfile1 1.0.25-10
ii libsoxr0 0.1.2-1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 5.3.1-11
ii libsystemd0 229-2
ii libtdb1 1.3.8-2
ii libudev1 229-2
ii libwebrtc-audio-processing-0 0.1-3
ii libx11-6 2:1.6.3-1
ii libx11-xcb1 2:1.6.3-1
ii libxcb1 1.11.1-1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 9.20160110
ii pulseaudio-utils 8.0-1
ii udev 229-2
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 8.0-1
ii rtkit 0.11-4
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
ii pavucontrol 3.0-3+b2
pn pavumeter <none>
-- Configuration Files:
/etc/pulse/default.pa changed:
.nofail
.fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
load-module module-detect
.endif
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
load-module module-switch-on-connect
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = yes
; lfe-crossover-freq = 120
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
#load-sample-lazy pulse-hotplug
/usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-coldplug
/usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=x11-bell
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
load-module module-switch-on-connect
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample mixing device
dmix:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample mixing device
dmix:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
HDA Intel HDMI, HDMI 2
Hardware device with all software conversions
sysdefault:CARD=PCH
HDA Intel PCH, CS4208 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Digital
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=1
HDA Intel PCH, CS4208 Digital
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=1
HDA Intel PCH, CS4208 Digital
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=1
HDA Intel PCH, CS4208 Digital
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, CS4208 Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=1
HDA Intel PCH, CS4208 Digital
Hardware device with all software conversions
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "8.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "8.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "8.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "8.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "8.0"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_03.0"
card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "8.0"
Module #7
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "8.0"
Module #8
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau"
module.description = "When a bluetooth sink or source is added,
load module-loopback"
module.version = "8.0"
Module #9
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and
load the corresponding discovery module"
module.version = "8.0"
Module #10
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio
devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "8.0"
Module #11
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "8.0"
Module #12
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "8.0"
Module #13
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "8.0"
Module #14
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "8.0"
Module #15
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "8.0"
Module #16
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "8.0"
Module #17
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "8.0"
Module #18
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "8.0"
Module #19
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "8.0"
Module #20
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "8.0"
Module #21
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "8.0"
Module #22
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "8.0"
Module #23
Name: module-switch-on-connect
Argument:
Usage counter: n/a
Properties:
module.author = "Michael Terry"
module.description = "When a sink/source is added, switch to it
or conditionally switch to it"
module.version = "8.0"
Module #24
Name: module-bluez5-device
Argument: path=/org/bluez/hci0/dev_30_21_FF_F2_7F_FF
Usage counter: 0
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "BlueZ 5 Bluetooth audio sink and source"
module.version = "8.0"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.hdmi-stereo
Description: Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb0a10000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "hdmi:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Built-in Audio Digital Stereo (HDMI)"
alsa.mixer_name = "Intel Haswell HDMI"
alsa.components = "HDA:80862807,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, not
available)
Active Port: hdmi-output-0
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 53066 / 81% / -5.50 dB, front-right: 53066 /
81% / -5.50 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CS4208 Analog"
alsa.id = "CS4208 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0a14000 irq 51"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Cirrus Logic CS4208"
alsa.components = "HDA:10134208,106b5d00,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-speaker: Speakers (priority: 10000)
analog-output-headphones: Headphones (priority: 9000, not
available)
Active Port: analog-output-headphones
Formats:
pcm
Sink #2
State: SUSPENDED
Name: bluez_sink.30_21_FF_F2_7F_FF
Description: The Block 4
Driver: module-bluez5-device.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 24
Mute: no
Volume: front-left: 57223 / 87% / -3.53 dB, front-right: 57223 /
87% / -3.53 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: bluez_sink.30_21_FF_F2_7F_FF.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
bluetooth.protocol = "a2dp_sink"
device.description = "The Block 4"
device.string = "30:21:FF:F2:7F:FF"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "hands-free"
bluez.path = "/org/bluez/hci0/dev_30_21_FF_F2_7F_FF"
bluez.class = "0x240408"
bluez.alias = "The Block 4"
device.icon_name = "audio-handsfree-bluetooth"
device.intended_roles = "phone"
Ports:
handsfree-output: Handsfree (priority: 0)
Active Port: handsfree-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor
Description: Monitor of Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 /
46% / -20.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_03.0.hdmi-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Digital Stereo
(HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb0a10000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0a14000 irq 51"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #2
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 30419 / 46% / -20.00 dB, front-right: 30419 /
46% / -20.00 dB
balance 0.00
Base Volume: 41350 / 63% / -12.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CS4208 Analog"
alsa.id = "CS4208 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0a14000 irq 51"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Cirrus Logic CS4208"
alsa.components = "HDA:10134208,106b5d00,00100300"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900)
analog-input-mic: Microphone (priority: 8700, not available)
Active Port: analog-input-internal-mic
Formats:
pcm
Source #3
State: SUSPENDED
Name: bluez_sink.30_21_FF_F2_7F_FF.monitor
Description: Monitor of The Block 4
Driver: module-bluez5-device.c
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 24
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: bluez_sink.30_21_FF_F2_7F_FF
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of The Block 4"
device.class = "monitor"
device.string = "30:21:FF:F2:7F:FF"
device.api = "bluez"
device.bus = "bluetooth"
device.form_factor = "hands-free"
bluez.path = "/org/bluez/hci0/dev_30_21_FF_F2_7F_FF"
bluez.class = "0x240408"
bluez.alias = "The Block 4"
device.icon_name = "audio-handsfree-bluetooth"
device.intended_roles = "phone"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 18
Properties:
application.name = "Login Session 10"
systemd-login.session = "10"
Client #1
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "gnome-settings-daemon"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
window.x11.display = ":0"
window.x11.screen = "0"
application.process.id = "12620"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "gnome-settings-daemon"
application.language = "en_GB.utf8"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
Client #2
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "GNOME Shell"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "en_GB.utf8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.id = "12658"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "gnome-shell"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
Client #3
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.18.2"
application.process.id = "12620"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "gnome-settings-daemon"
application.language = "en_GB.utf8"
window.x11.display = ":0"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
Client #4
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "3.18.1"
application.process.id = "12658"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "gnome-shell"
application.language = "en_GB.utf8"
window.x11.display = ":0"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
Client #9
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "Chrome input"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "15614"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "chromium"
window.x11.display = ":0"
application.language = "en_GB.utf8"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
application.icon_name = "chromium.png"
Client #11
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "Icedove"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.icon_name = "icedove"
application.version = "38.6.0"
application.process.id = "14967"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "icedove"
window.x11.display = ":0"
application.language = "en_GB.utf8"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
Client #18
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "16317"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
Sample #0
Name: bell-window-system
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Volume: (invalid)
balance 0.00
Duration: 0.8s
Size: 129.5 KiB
Lazy: no
Filename: n/a
Properties:
media.role = "event"
application.process.id = "16181"
application.name = "gvim"
event.description = "Bell event"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename =
"/home/tony/.local/share/sounds/__custom/./bell-window-system.ogg"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.id = "org.gnome.Shell"
application.icon_name = "start-here"
application.language = "en_GB.utf8"
window.x11.screen = "0"
window.x11.display = ":0"
application.process.user = "tony"
application.process.host = "jeanette"
application.process.binary = "gnome-shell"
application.process.machine_id =
"960f761acbf54bfb818da399cd898ef7"
application.process.session_id = "10"
Card #0
Name: alsa_card.pci-0000_00_03.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xb0a10000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0a0c"
device.product.name = "Haswell-ULT HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1,
sources: 0, priority: 5400, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 300, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 300, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output
(sinks: 1, sources: 0, priority: 5200, available: yes)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2)
Output (sinks: 1, sources: 0, priority: 100, available: yes)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2)
Output (sinks: 1, sources: 0, priority: 100, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output
(sinks: 1, sources: 0, priority: 5200, available: yes)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3)
Output (sinks: 1, sources: 0, priority: 100, available: yes)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3)
Output (sinks: 1, sources: 0, priority: 100, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo,
output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1,
output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (priority: 5700, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2,
output:hdmi-surround-extra2, output:hdmi-surround71-extra2
Card #1
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xb0a14000 irq 51"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9c20"
device.product.name = "8 Series HD Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1,
priority: 60, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex
(sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-21: Analog Surround 2.1 Output (sinks:
1, sources: 0, priority: 800, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround
2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860,
available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks:
1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround
4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760,
available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1,
sources: 0, priority: 5500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo
(IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560,
available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900,
latency offset: 0 usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
analog-input-mic: Microphone (priority: 8700, latency offset: 0
usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:iec958-stereo+input:analog-stereo
analog-output-speaker: Speakers (priority: 10000, latency
offset: 0 usec)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-21,
output:analog-surround-21+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (priority: 0,
latency offset: 0 usec)
Part of profile(s): output:iec958-stereo,
output:iec958-stereo+input:analog-stereo
Card #2
Name: bluez_card.30_21_FF_F2_7F_FF
Driver: module-bluez5-device.c
Owner Module: 24
Properties:
device.description = "The Block 4"
device.string = "30:21:FF:F2:7F:FF"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "hands-free"
bluez.path = "/org/bluez/hci0/dev_30_21_FF_F2_7F_FF"
bluez.class = "0x240408"
bluez.alias = "The Block 4"
device.icon_name = "audio-handsfree-bluetooth"
device.intended_roles = "phone"
Profiles:
headset_head_unit: Headset Head Unit (HSP/HFP) (sinks: 1,
sources: 1, priority: 20, available: no)
a2dp_sink: High Fidelity Playback (A2DP Sink) (sinks: 1,
sources: 0, priority: 10, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: a2dp_sink
Ports:
handsfree-output: Handsfree (priority: 0, latency offset: 0
usec)
Part of profile(s): headset_head_unit, a2dp_sink
handsfree-input: Handsfree (priority: 0, latency offset: 0
usec, not available)
Part of profile(s): headset_head_unit
Server String: /run/user/1000/pulse/native
Library Protocol Version: 30
Server Protocol Version: 30
Is Local: yes
Client Index: 19
Tile Size: 65472
User Name: tony
Host Name: jeanette
Server Name: pulseaudio
Server Version: 8.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: bluez_sink.30_21_FF_F2_7F_FF
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: 0cc9:e3f4
