Package: src:linux
Version: 3.2.73-2+deb7u2
Severity: normal
Dear Maintainer,
* What led up to the situation? update kernel (security update)
* What exactly did you do (or not do) that was effective (or
ineffective)? Boot with the new kernel
* What was the outcome of this action? Doesn't boot
* Workaround: Change ACPI by APM
-- Package-specific info:
** Version:
Linux version 3.2.0-4-486 (debian-ker...@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-14) ) #1 Debian 3.2.73-2+deb7u2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=/dev/mapper/vg-root ro
console=ttyS0,115200 quiet
** Not tainted
** Kernel log (with BIOS ACPI option):
Loading Linux 3.2.0-4-486 ...
Loading initial ramdisk ...
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-486 (debian-ker...@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-14) ) #1 Debian 3.2.73-2+deb7u2
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f7b0000 (usable)
BIOS-e820: 000000001f7b0000 - 000000001f7b3000 (ACPI NVS)
BIOS-e820: 000000001f7b3000 - 000000001f7c0000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.2 present.
last_pfn = 0x1f7b0 max_arch_pfn = 0x100000
init_memory_mapping: 0000000000000000-000000001f7b0000
RAMDISK: 1ec91000 - 1ef60000
ACPI: RSDP 0x00000000000F6050 00014 (v00 AMDGX3)
ACPI: RSDT 0x000000001F7B3000 00028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD
00000000)
ACPI: FACP 0x000000001F7B3080 00074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD
00000000)
ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8
(20110623/tbfadt-610)
ACPI: DSDT 0x000000001F7B3100 02A28 (v01 AMDGX3 AWRDACPI 00001000 MSFT
03000000)
ACPI: FACS 0x000000001F7B0000 00040
0MB HIGHMEM available.
503MB LOWMEM available.
mapped low ram: 0 - 1f7b0000
low ram: 0 - 1f7b0000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0001f7b0
HighMem empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x0001f7b0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x9c10
No local APIC present or hardware disabled
APIC: disable apic facility
APIC: switched to apic NOOP
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 1f7c0000 (gap: 1f7c0000:e0830000)
Booting paravirtualized kernel on bare hardware
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127822
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486
root=/dev/mapper/vg-root ro console=ttyS0,115200n1
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 503060k/515776k available (2605k kernel code, 12260k reserved, 1300k
data, 460k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdffb0000 - 0xff7fe000 ( 504 MB)
lowmem : 0xc0000000 - 0xdf7b0000 ( 503 MB)
.init : 0xc13d1000 - 0xc1444000 ( 460 kB)
.data : 0xc128b7ac - 0xc13d0800 (1300 kB)
.text : 0xc1000000 - 0xc128b7ac (2605 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
NR_IRQS:2304 nr_irqs:256 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 499.890 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
999.78 BogoMIPS (lpj=1999560)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
ACPI: Core revision 20110623
ACPI: setting ELCR to 0200 (from 0c00)
Performance Events: no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
devtmpfs: initialized
PM: Registering ACPI NVS region at 1f7b0000 (12288 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa960, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xac17]
pci_root PNP0A03:00: host bridge window [io 0xac20-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x1f7c0000-0xfebfffff]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.1
PCI: Using ACPI for IRQ routing
pci 0000:00:01.0: no compatible bridge window for [io 0xac1c-0xac1f]
pci 0000:00:0f.0: address space collision: [io 0x9c00-0x9c3f] conflicts with
ACPI PM1a_EVT_BLK [??? 0x00009c00-0x00009c03 flags 0x80000000]
Switching to clocksource pit
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x1f7b0000-0x1f7bffff] could not be reserved
system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x1f7affff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR
3 [io 0x0000-0x001f]
pnp 00:02: disabling [io 0x0010-0x001f disabled] because it overlaps
0000:00:0f.0 BAR 5 [io 0x0000-0x003f]
pnp 00:02: disabling [io 0x0022-0x002d] because it overlaps 0000:00:0f.0 BAR
5 [io 0x0000-0x003f]
pnp 00:02: disabling [io 0x0030-0x003f] because it overlaps 0000:00:0f.0 BAR
5 [io 0x0000-0x003f]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0800-0x0805] has been reserved
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
pci 0000:00:0f.0: BAR 5: assigned [io 0x1000-0x103f]
pci 0000:00:0f.0: BAR 3: assigned [io 0x1040-0x105f]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
** Kernel log (with BIOS APM option):
[ 1.199190] rtc0: alarms up to one day, 114 bytes nvram
[ 1.199474] EISA: Probing bus 0 at eisa.0
[ 1.199556] Cannot allocate resource for EISA slot 1
[ 1.199620] Cannot allocate resource for EISA slot 6
[ 1.199659] EISA: Detected 0 cards.
[ 1.199674] cpuidle: using governor ladder
[ 1.199689] cpuidle: using governor menu
[ 1.201330] TCP cubic registered
[ 1.201508] NET: Registered protocol family 10
[ 1.205175] Mobile IPv6
[ 1.205192] NET: Registered protocol family 17
[ 1.205218] Registering the dns_resolver key type
[ 1.205270] Using IPI Shortcut mode
[ 1.205861] PM: Hibernation image not present or could not be loaded.
[ 1.205912] registered taskstats version 1
[ 1.206785] rtc_cmos 00:03: setting system clock to 2016-01-29 11:57:46 UTC
(1454068666)
[ 1.207015] Initializing network drop monitor service
[ 1.207818] Freeing unused kernel memory: 460k freed
[ 1.208657] Write protecting the kernel text: 2608k
[ 1.208822] Write protecting the kernel read-only data: 1036k
[ 1.217812] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.276071] udevd[43]: starting version 175
[ 1.565908] SCSI subsystem initialized
[ 1.672179] libata version 3.00 loaded.
[ 1.674645] pata_amd 0000:00:0f.2: version 0.4.1
[ 1.678263] scsi0 : pata_amd
[ 1.679083] scsi1 : pata_amd
[ 1.679437] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.679460] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.811594] Switching to clocksource tsc
[ 1.844403] ata1.00: CFA: TS4GCF200I, 20110407, max UDMA/66
[ 1.844427] ata1.00: 7962192 sectors, multi 0: LBA
[ 1.860304] ata1.00: configured for UDMA/66
[ 1.860759] scsi 0:0:0:0: Direct-Access ATA TS4GCF200I 2011
PQ: 0 ANSI: 5
[ 1.862550] ata2: port disabled--ignoring
[ 1.894513] sd 0:0:0:0: [sda] 7962192 512-byte logical blocks: (4.07 GB/3.79
GiB)
[ 1.894817] sd 0:0:0:0: [sda] Write Protect is off
[ 1.894841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.894977] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.898435] sda: sda1
[ 1.900098] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.043334] device-mapper: uevent: version 1.0.3
[ 2.045385] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 2.357978] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 3.207488] udevd[254]: starting version 175
[ 3.512579] cs5535-gpio cs5535-gpio: reserved resource region [io
0x6100-0x61ff]
[ 3.512607] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
[ 3.513055] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 3.517345] AMD Geode RNG detected
[ 3.554339] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.560498] lxfb 0000:00:01.1: 8192 KB of video memory at 0xee000000
[ 3.648427] fbcon: Geode LX (fb0) is primary device
[ 3.659813] Console: switching to colour frame buffer device 80x30
[ 3.668983] fb0: Geode LX frame buffer device
[ 3.731323] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.861267] 8139cp 0000:00:06.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip, use 8139too
[ 3.891722] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 3.905317] usbcore: registered new interface driver usbfs
[ 3.905641] usbcore: registered new interface driver hub
[ 3.914471] usbcore: registered new device driver usb
[ 3.954038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.097779] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.180159] geode-aes: GEODE AES engine enabled.
[ 4.190640] 8139too 0000:00:06.0: eth0: RealTek RTL8139 at 0xfc00,
00:07:32:30:b1:2a, IRQ 11
[ 4.191011] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 4.191054] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 4.191141] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus
number 1
[ 4.212219] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xefffd000
[ 4.224122] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 4.224253] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.224276] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.224297] usb usb1: Product: EHCI Host Controller
[ 4.224315] usb usb1: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[ 4.224333] usb usb1: SerialNumber: 0000:00:0f.5
[ 4.225123] hub 1-0:1.0: USB hub found
[ 4.225154] hub 1-0:1.0: 4 ports detected
[ 4.229192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.229550] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 4.229593] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 4.229655] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus
number 2
[ 4.229727] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffe000
[ 4.237019] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io
0x6200-0x623f]
[ 4.237053] cs5535-mfgpt cs5535-mfgpt: 0 MFGPT timers available
[ 4.269779] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[ 4.305761] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.305788] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.305808] usb usb2: Product: OHCI Host Controller
[ 4.305826] usb usb2: Manufacturer: Linux 3.2.0-4-486 ohci_hcd
[ 4.305845] usb usb2: SerialNumber: 0000:00:0f.4
[ 4.307012] hub 2-0:1.0: USB hub found
[ 4.307048] hub 2-0:1.0: 4 ports detected
[ 4.980259] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 5.138745] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 5.336272] loop: module loaded
[ 8.248761] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.257459] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.639410] 8139too 0000:00:06.0: eth0: link up, 100Mbps, full-duplex, lpa
0x45E1
[ 19.936045] eth0: no IPv6 routers present
[13476.054017] 8139too 0000:00:06.0: eth0: link up, 100Mbps, full-duplex, lpa
0x45E1
[13486.568063] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
loop
scx200_acb
i2c_core
cs5535_mfgpt
ohci_hcd
ecb
snd_pcm
cryptd
aes_i586
snd_page_alloc
aes_generic
ehci_hcd
snd_timer
usbcore
8139too
snd
soundcore
pcspkr
evdev
geode_aes
8139cp
usb_common
lxfb
mii
geode_rng
cs5535_mfd
rng_core
ext4
crc16
mbcache
jbd2
dm_mod
sd_mod
crc_t10dif
ata_generic
pata_cs5536
pata_amd
libata
scsi_mod
** PCI devices:
00:01.0 Host bridge [0600]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] Host Bridge [1022:2080] (rev 33)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host
Bridge [1022:2080]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: I/O ports at ac1c [size=4]
00:01.1 VGA compatible controller [0300]: Advanced Micro Devices [AMD] Geode LX
Video [1022:2081] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices [AMD] Geode LX Video [1022:2081]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at efff0000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at effec000 (32-bit, non-prefetchable) [size=16K]
Region 3: Memory at effe8000 (32-bit, non-prefetchable) [size=16K]
Region 4: Memory at efff8000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled]
Kernel driver in use: lxfb
00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices [AMD]
Geode LX AES Security Block [1022:2082]
Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block
[1022:2082]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: Geode LX AES
00:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
[10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at effff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
00:0c.0 Bridge [0680]: Integrated Technology Express, Inc. IT8888F/G PCI to ISA
Bridge with SMB [Golden Gate] [1283:8888] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0f.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] ISA [1022:2090] (rev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
[1022:2090]
Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 6000 [size=8]
Region 1: I/O ports at 6100 [size=256]
Region 2: I/O ports at 6200 [size=64]
Region 3: I/O ports at 1000 [size=32]
Region 4: I/O ports at 9d00 [size=128]
Region 5: I/O ports at 9c00 [size=64]
Kernel driver in use: cs5535-mfd
00:0f.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
[1022:209a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248, Cache Line Size: 32 bytes
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_amd
00:0f.4 USB controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC
[1022:2094]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:0f.5 USB controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode
companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC
[1022:2095]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.9
Architecture: i386 (i586)
Kernel: Linux 3.2.0-4-486
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-486 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
Versions of packages linux-image-3.2.0-4-486 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-486 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u3
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-486 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-486/prerm/removing-running-kernel-3.2.0-4-486: true
linux-image-3.2.0-4-486/postinst/depmod-error-initrd-3.2.0-4-486: false
linux-image-3.2.0-4-486/postinst/missing-firmware-3.2.0-4-486:
linux-image-3.2.0-4-486/postinst/ignoring-ramdisk:
