Package: installation-reports Boot method: flashed image (see instructions below), network-console access to installer Image version: http://ftp.debian.org/debian/dists/stable/main/installer-armel/current/images/kirkwood/network-console/qnap/ts-219/ Date: 01/01/2016 22:10
Machine: QNAP TS-220 TurboNAS
Processor: Marvell 1.6GHz
Memory: 512MB DDR3
Partitions:
~ # df
Filesystem 1K-blocks Used Available Use% Mounted on
none 51372 64 51308 0% /run
devtmpfs 252112 0 252112 0% /dev
/dev/mapper/qnap--vg-root
2882292048 541944 2735315032 0% /target
/dev/md0p1 240972 5822 222709 3% /target/boot
/dev/mapper/qnap--vg-root
2882292048 541944 2735315032 0% /dev/.static/dev
devtmpfs 252112 0 252112 0% /target/dev
Output of lspci -knn (or lspci -nn):
~ # lspci -knn
00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device
[11ab:6282] (rev 01)
Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
00:01.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 03)
Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363]
Kernel driver in use: ahci
00:01.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 03)
Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363]
01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device
[11ab:6282] (rev 01)
Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab]
01:01.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host
Controller [1b6f:7023] (rev 01)
Subsystem: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023]
Kernel driver in use: xhci_hcd
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate
below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [E]
Comments/Problems:
QNAP TS-220 specs at
http://eu1.qnap.com/Storage/TechnicalDocument/20140620-QNAP_Turbo_NAS_Hardware_Manual_ENG_2014v1.pdf
Following installation instructions from
http://www.cyrius.com/debian/kirkwood/qnap/ts-219/install/
Installation fails 100% of the time in the following scenario for me;
installed hard drives are in a software RAID1, in partitioning options
select 'Guided - use the entire disk and setup encrypted LVM', select the
RAID array followed by 'All files in one partition'.
Install proceeds to 'Installing the Base System' and fails at 83%
'Configuring linux-image-3.16.0-4-kirkwood (armel)', displaying 'Unable to
install the selected kernel An error was returned while trying to install
the kernel into the target system. Kernel package: 'linux-image-kirkwood'
Dropping to a shell and tailing syslog:
~ # tail -50 /var/log/syslog
Jan 1 22:32:49 in-target: Selecting previously unselected package
linux-base.^M
Jan 1 22:32:49 in-target: Preparing to unpack .../linux-base_3.5_all.deb
...
Jan 1 22:32:49 in-target: ^M
Jan 1 22:32:49 in-target: Unpacking linux-base (3.5) ...^M
Jan 1 22:32:50 in-target: Selecting previously unselected package
linux-image-3.16.0-4-kirkwood.^M
Jan 1 22:32:50 in-target: Preparing to unpack
.../linux-image-3.16.0-4-kirkwood_3.16.7-ckt11-1+deb8u3_armel.deb ...
Jan 1 22:32:50 in-target: ^M
Jan 1 22:32:55 in-target: Unpacking linux-image-3.16.0-4-kirkwood
(3.16.7-ckt11-1+deb8u3) ...^M
Jan 1 22:33:20 in-target: Selecting previously unselected package
linux-image-kirkwood.^M
Jan 1 22:33:20 in-target: Preparing to unpack
.../linux-image-kirkwood_3.16+63_armel.deb ...
Jan 1 22:33:20 in-target: ^M
Jan 1 22:33:20 in-target: Unpacking linux-image-kirkwood (3.16+63) ...^M
Jan 1 22:33:21 in-target: Processing triggers for man-db (2.7.0.2-5) ...^M
Jan 1 22:33:22 in-target: Setting up libuuid-perl (0.05-1+b1) ...
Jan 1 22:33:22 in-target: ^M
Jan 1 22:33:23 in-target: Setting up linux-base (3.5) ...^M
Jan 1 22:33:28 in-target: Setting up linux-image-3.16.0-4-kirkwood
(3.16.7-ckt11-1+deb8u3) ...^M
Jan 1 22:33:36 in-target: /etc/kernel/postinst.d/initramfs-tools:^M
Jan 1 22:33:36 in-target: update-initramfs: Generating
/boot/initrd.img-3.16.0-4-kirkwood^M
Jan 1 22:33:36 in-target: mkinitramfs: for device
/dev/mapper/qnap--vg-root missing /sys/block/ entry^M
Jan 1 22:33:36 in-target: mkinitramfs: workaround is MODULES=most^M
Jan 1 22:33:36 in-target: mkinitramfs: Error please report the bug^M
Jan 1 22:33:36 in-target: update-initramfs: failed for
/boot/initrd.img-3.16.0-4-kirkwood with 1.^M
Jan 1 22:33:36 in-target: run-parts:
/etc/kernel/postinst.d/initramfs-tools exited with return code 1^M
Jan 1 22:33:36 in-target: Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-3.16.0-4-kirkwood.postinst line 634.^M
Jan 1 22:33:36 in-target: dpkg: error processing package
linux-image-3.16.0-4-kirkwood (--configure):^M
Jan 1 22:33:36 in-target: subprocess installed post-installation script
returned error exit status 1^M
Jan 1 22:33:36 in-target: dpkg: dependency problems prevent configuration
of linux-image-kirkwood:^M
Jan 1 22:33:36 in-target: linux-image-kirkwood depends on
linux-image-3.16.0-4-kirkwood; however:^M
Jan 1 22:33:36 in-target: Package linux-image-3.16.0-4-kirkwood is not
configured yet.^M
Jan 1 22:33:36 in-target: ^M
Jan 1 22:33:36 in-target: dpkg: error processing package
linux-image-kirkwood (--configure):^M
Jan 1 22:33:36 in-target: dependency problems - leaving unconfigured^M
Jan 1 22:33:37 in-target: Errors were encountered while processing:^M
Jan 1 22:33:37 in-target: linux-image-3.16.0-4-kirkwood^M
Jan 1 22:33:37 in-target: linux-image-kirkwood^M
Jan 1 22:33:39 in-target: E
Jan 1 22:33:39 in-target: :
Jan 1 22:33:39 in-target: Sub-process /usr/bin/dpkg returned an error code
(1)
Jan 1 22:33:39 in-target:
Jan 1 22:33:39 base-installer: error: exiting on error
base-installer/kernel/failed-install
Jan 1 22:36:40 main-menu[1408]: WARNING **: Configuring 'bootstrap-base'
failed with error code 30
Jan 1 22:36:40 main-menu[1408]: WARNING **: Menu item 'bootstrap-base'
failed.
Jan 1 22:36:42 main-menu[1408]: INFO: Modifying debconf priority limit
from 'high' to 'medium'
Jan 1 22:36:42 debconf: Setting debconf/priority to medium
I have pulled debug logs using the provided menu options and attached them
to this report.
install.tar.gz
Description: GNU Zip compressed data
