Saned output with debug enabled:
saned[6641]: saned (AF-indep+IPv6+systemd) from sane-backends 1.0.24 starting up saned[6641]: check_host: access by remote host: ::ffff:[client_ip] saned[6641]: init: access granted to user@::ffff:[client_ip] saned[6641]: [sanei_debug] Setting debug level of dll to 255. saned[6641]: [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.24 saned[6641]: [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' saned[6641]: [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' saned[6641]: [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras saned[6641]: [dll] sane_init/read_config: reading dll.d/libsane-extras saned[6641]: [dll] add_backend: adding backend `ls5000' saned[6641]: [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip saned[6641]: [dll] sane_init/read_config: reading dll.d/hplip saned[6641]: [dll] add_backend: adding backend `hpaio' saned[6641]: [dll] sane_init/read_dlld: done. saned[6641]: [dll] sane_init/read_config: reading dll.conf saned[6641]: [dll] add_backend: adding backend `net' saned[6641]: [dll] add_backend: adding backend `abaton' saned[6641]: [dll] add_backend: adding backend `agfafocus' saned[6641]: [dll] add_backend: adding backend `apple' saned[6641]: [dll] add_backend: adding backend `avision' saned[6641]: [dll] add_backend: adding backend `artec' saned[6641]: [dll] add_backend: adding backend `artec_eplus48u' saned[6641]: [dll] add_backend: adding backend `as6e' saned[6641]: [dll] add_backend: adding backend `bh' saned[6641]: [dll] add_backend: adding backend `canon' saned[6641]: [dll] add_backend: adding backend `canon630u' saned[6641]: [dll] add_backend: adding backend `canon_dr' saned[6641]: [dll] add_backend: adding backend `cardscan' saned[6641]: [dll] add_backend: adding backend `coolscan' saned[6641]: [dll] add_backend: adding backend `coolscan3' saned[6641]: [dll] add_backend: adding backend `dell1600n_net' saned[6641]: [dll] add_backend: adding backend `dmc' saned[6641]: [dll] add_backend: adding backend `epjitsu' saned[6641]: [dll] add_backend: adding backend `epson2' saned[6641]: [dll] add_backend: adding backend `fujitsu' saned[6641]: [dll] add_backend: adding backend `genesys' saned[6641]: [dll] add_backend: adding backend `gt68xx' saned[6641]: [dll] add_backend: adding backend `hp' saned[6641]: [dll] add_backend: adding backend `hp3900' saned[6641]: [dll] add_backend: adding backend `hpsj5s' saned[6641]: [dll] add_backend: adding backend `hp3500' saned[6641]: [dll] add_backend: adding backend `hp4200' saned[6641]: [dll] add_backend: adding backend `hp5400' saned[6641]: [dll] add_backend: adding backend `hp5590' saned[6641]: [dll] add_backend: adding backend `hpljm1005' saned[6641]: [dll] add_backend: adding backend `hs2p' saned[6641]: [dll] add_backend: adding backend `ibm' saned[6641]: [dll] add_backend: adding backend `kodak' saned[6641]: [dll] add_backend: adding backend `kodakaio' saned[6641]: [dll] add_backend: adding backend `kvs1025' saned[6641]: [dll] add_backend: adding backend `kvs20xx' saned[6641]: [dll] add_backend: adding backend `leo' saned[6641]: [dll] add_backend: adding backend `lexmark' saned[6641]: [dll] add_backend: adding backend `ma1509' saned[6641]: [dll] add_backend: adding backend `magicolor' saned[6641]: [dll] add_backend: adding backend `matsushita' saned[6641]: [dll] add_backend: adding backend `microtek' saned[6641]: [dll] add_backend: adding backend `microtek2' saned[6641]: [dll] add_backend: adding backend `mustek' saned[6641]: [dll] add_backend: adding backend `mustek_usb' saned[6641]: [dll] add_backend: adding backend `mustek_usb2' saned[6641]: [dll] add_backend: adding backend `nec' saned[6641]: [dll] add_backend: adding backend `niash' saned[6641]: [dll] add_backend: adding backend `pie' saned[6641]: [dll] add_backend: adding backend `pixma' saned[6641]: [dll] add_backend: adding backend `plustek' saned[6641]: [dll] add_backend: adding backend `qcam' saned[6641]: [dll] add_backend: adding backend `ricoh' saned[6641]: [dll] add_backend: adding backend `rts8891' saned[6641]: [dll] add_backend: adding backend `s9036' saned[6641]: [dll] add_backend: adding backend `sceptre' saned[6641]: [dll] add_backend: adding backend `sharp' saned[6641]: [dll] add_backend: adding backend `sm3600' saned[6641]: [dll] add_backend: adding backend `sm3840' saned[6641]: [dll] add_backend: adding backend `snapscan' saned[6641]: [dll] add_backend: adding backend `sp15c' saned[6641]: [dll] add_backend: adding backend `tamarack' saned[6641]: [dll] add_backend: adding backend `teco1' saned[6641]: [dll] add_backend: adding backend `teco2' saned[6641]: [dll] add_backend: adding backend `teco3' saned[6641]: [dll] add_backend: adding backend `u12' saned[6641]: [dll] add_backend: adding backend `umax' saned[6641]: [dll] add_backend: adding backend `umax1220u' saned[6641]: [dll] add_backend: adding backend `v4l' saned[6641]: [dll] add_backend: adding backend `xerox_mfp' saned[6641]: [dll] sane_get_devices saned[6641]: [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1' saned[6641]: [dll] init: initializing backend `xerox_mfp' saned[6641]: [dll] init: backend `xerox_mfp' is version 1.0.13 saned[6641]: [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' saned[6641]: [dll] init: initializing backend `v4l' saned[6641]: [dll] init: backend `v4l' is version 1.0.5 saned[6641]: [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1' saned[6641]: [dll] init: initializing backend `umax1220u' saned[6641]: [dll] init: backend `umax1220u' is version 1.0.2 saned[6641]: [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1' saned[6641]: [dll] init: initializing backend `umax' saned[6641]: [dll] init: backend `umax' is version 1.0.45 saned[6641]: [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1' saned[6641]: [dll] init: initializing backend `u12' saned[6641]: [dll] init: backend `u12' is version 1.0.0 saned[6641]: [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1' saned[6641]: [dll] init: initializing backend `teco3' saned[6641]: [dll] init: backend `teco3' is version 1.0.1 saned[6641]: [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1' saned[6641]: [dll] init: initializing backend `teco2' saned[6641]: [dll] init: backend `teco2' is version 1.0.10 saned[6641]: [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1' saned[6641]: [dll] init: initializing backend `teco1' saned[6641]: [dll] init: backend `teco1' is version 1.0.10 saned[6641]: [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1' saned[6641]: [dll] init: initializing backend `tamarack' saned[6641]: [dll] init: backend `tamarack' is version 1.0.0 saned[6641]: [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1' saned[6641]: [dll] init: initializing backend `sp15c' saned[6641]: [dll] init: backend `sp15c' is version 1.0.0 saned[6641]: [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1' saned[6641]: [dll] init: initializing backend `snapscan' saned[6641]: [dll] init: backend `snapscan' is version 1.4.53 saned[6641]: [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1' saned[6641]: [dll] init: initializing backend `sm3840' saned[6641]: [dll] init: backend `sm3840' is version 1.0.0 saned[6641]: [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1' saned[6641]: [dll] init: initializing backend `sm3600' saned[6641]: [dll] init: backend `sm3600' is version 1.0.6 saned[6641]: [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1' saned[6641]: [dll] init: initializing backend `sharp' saned[6641]: [dll] init: backend `sharp' is version 1.0.0 saned[6641]: [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1' saned[6641]: [dll] init: initializing backend `sceptre' saned[6641]: [dll] init: backend `sceptre' is version 1.0.10 saned[6641]: [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1' saned[6641]: [dll] init: initializing backend `s9036' saned[6641]: [dll] init: backend `s9036' is version 1.0.0 saned[6641]: [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1' saned[6641]: [dll] init: initializing backend `rts8891' saned[6641]: [dll] init: backend `rts8891' is version 1.0.2401 saned[6641]: [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1' saned[6641]: [dll] init: initializing backend `ricoh' saned[6641]: [dll] init: backend `ricoh' is version 1.0.0 saned[6641]: [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1' saned[6641]: [dll] init: initializing backend `qcam' saned[6641]: [dll] init: backend `qcam' is version 1.0.0 saned[6641]: [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1' saned[6641]: [dll] init: initializing backend `plustek' saned[6641]: [dll] init: backend `plustek' is version 1.0.0 saned[6641]: [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' saned[6641]: [dll] init: initializing backend `pixma' saned[6641]: [dll] init: backend `pixma' is version 1.0.17 saned[6641]: [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1' saned[6641]: [dll] init: initializing backend `pie' saned[6641]: [dll] init: backend `pie' is version 1.0.9 saned[6641]: [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1' saned[6641]: [dll] init: initializing backend `niash' saned[6641]: [dll] init: backend `niash' is version 1.0.1 saned[6641]: [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1' saned[6641]: [dll] init: initializing backend `nec' saned[6641]: [dll] init: backend `nec' is version 1.0.0 saned[6641]: [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1' saned[6641]: [dll] init: initializing backend `mustek_usb2' saned[6641]: [dll] init: backend `mustek_usb2' is version 1.0.10 saned[6641]: [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1' saned[6641]: [dll] init: initializing backend `mustek_usb' saned[6641]: [dll] init: backend `mustek_usb' is version 1.0.18 saned[6641]: [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1' saned[6641]: [dll] init: initializing backend `mustek' saned[6641]: [dll] init: backend `mustek' is version 1.0.138 saned[6641]: [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1' saned[6641]: [dll] init: initializing backend `microtek2' saned[6641]: [dll] init: backend `microtek2' is version 1.0.0 saned[6641]: [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1' saned[6641]: [dll] init: initializing backend `microtek' saned[6641]: [dll] init: backend `microtek' is version 1.0.0 saned[6641]: [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1' saned[6641]: [dll] init: initializing backend `matsushita' saned[6641]: [dll] init: backend `matsushita' is version 1.0.7 saned[6641]: [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1' saned[6641]: [dll] init: initializing backend `magicolor' saned[6641]: [dll] init: backend `magicolor' is version 1.0.1 saned[6641]: [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1' saned[6641]: [dll] init: initializing backend `ma1509' saned[6641]: [dll] init: backend `ma1509' is version 1.0.3 saned[6641]: [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1' saned[6641]: [dll] init: initializing backend `lexmark' saned[6641]: [dll] init: backend `lexmark' is version 1.0.32 saned[6641]: [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1' saned[6641]: [dll] init: initializing backend `leo' saned[6641]: [dll] init: backend `leo' is version 1.0.11 saned[6641]: [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1' saned[6641]: [dll] init: initializing backend `kvs20xx' saned[6641]: [dll] init: backend `kvs20xx' is version 1.0.2 saned[6641]: [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1' saned[6641]: [dll] init: initializing backend `kvs1025' saned[6641]: [dll] init: backend `kvs1025' is version 1.0.5 saned[6641]: [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1' saned[6641]: [dll] init: initializing backend `kodakaio' saned[6641]: [dll] init: backend `kodakaio' is version 1.0.6 saned[6641]: [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1' saned[6641]: [dll] init: initializing backend `kodak' saned[6641]: [dll] init: backend `kodak' is version 1.0.7 saned[6641]: [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1' saned[6641]: [dll] init: initializing backend `ibm' saned[6641]: [dll] init: backend `ibm' is version 1.0.0 saned[6641]: [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1' saned[6641]: [dll] init: initializing backend `hs2p' saned[6641]: [dll] init: backend `hs2p' is version 1.0.0 saned[6641]: [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1' saned[6641]: [dll] init: initializing backend `hpljm1005' saned[6641]: [dll] init: backend `hpljm1005' is version 1.0.1 saned[6641]: [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1' saned[6641]: [dll] init: initializing backend `hp5590' saned[6641]: [dll] init: backend `hp5590' is version 1.0.7 saned[6641]: [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1' saned[6641]: [dll] init: initializing backend `hp5400' saned[6641]: [dll] init: backend `hp5400' is version 1.0.3 saned[6641]: [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1' saned[6641]: [dll] init: initializing backend `hp4200' saned[6641]: [dll] init: backend `hp4200' is version 1.0.0 saned[6641]: [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1' saned[6641]: [dll] init: initializing backend `hp3500' saned[6641]: [dll] init: backend `hp3500' is version 1.0.0 saned[6641]: [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1' saned[6641]: [dll] init: initializing backend `hpsj5s' saned[6641]: [dll] init: backend `hpsj5s' is version 1.0.3 saned[6641]: [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1' saned[6641]: [dll] init: initializing backend `hp3900' saned[6641]: [dll] init: backend `hp3900' is version 1.0.0 saned[6641]: [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1' saned[6641]: [dll] init: initializing backend `hp' saned[6641]: [dll] init: backend `hp' is version 1.0.8 saned[6641]: [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1' saned[6641]: [dll] init: initializing backend `gt68xx' saned[6641]: [dll] init: backend `gt68xx' is version 1.0.84 saned[6641]: [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1' saned[6641]: [dll] init: initializing backend `genesys' saned[6641]: [dll] init: backend `genesys' is version 1.0.2411 saned[6641]: [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1' saned[6641]: [dll] init: initializing backend `fujitsu' saned[6641]: [dll] init: backend `fujitsu' is version 1.0.117 saned[6641]: [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1' saned[6641]: [dll] init: initializing backend `epson2' saned[6641]: [dll] init: backend `epson2' is version 1.0.124 saned[6641]: [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1' saned[6641]: [dll] init: initializing backend `epjitsu' saned[6641]: [dll] init: backend `epjitsu' is version 1.0.20 saned[6641]: [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1' saned[6641]: [dll] init: initializing backend `dmc' saned[6641]: [dll] init: backend `dmc' is version 1.0.0 saned[6641]: [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1' saned[6641]: [dll] init: initializing backend `dell1600n_net' saned[6641]: [dll] init: backend `dell1600n_net' is version 1.0.0 saned[6641]: [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1' saned[6641]: [dll] init: initializing backend `coolscan3' saned[6641]: [dll] init: backend `coolscan3' is version 1.0.0 saned[6641]: [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1' saned[6641]: [dll] init: initializing backend `coolscan' saned[6641]: [dll] init: backend `coolscan' is version 1.0.0 saned[6641]: [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1' saned[6641]: [dll] init: initializing backend `cardscan' saned[6641]: [dll] init: backend `cardscan' is version 1.0.2 saned[6641]: [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' saned[6641]: [dll] init: initializing backend `canon_dr' saned[6641]: [dll] init: backend `canon_dr' is version 1.0.41 saned[6641]: [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' saned[6641]: [dll] init: initializing backend `canon630u' saned[6641]: [dll] init: backend `canon630u' is version 1.0.1 saned[6641]: [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' saned[6641]: [dll] init: initializing backend `canon' saned[6641]: [dll] init: backend `canon' is version 1.0.0 saned[6641]: [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1' saned[6641]: [dll] init: initializing backend `bh' saned[6641]: [dll] init: backend `bh' is version 1.0.4 saned[6641]: [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1' saned[6641]: [dll] init: initializing backend `as6e' saned[6641]: [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1' saned[6641]: [dll] init: initializing backend `artec_eplus48u' saned[6641]: [dll] init: backend `artec_eplus48u' is version 1.0.0 saned[6641]: [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1' saned[6641]: [dll] init: initializing backend `artec' saned[6641]: [dll] init: backend `artec' is version 1.0.0 saned[6641]: [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1' saned[6641]: [dll] init: initializing backend `avision' saned[6641]: [dll] init: backend `avision' is version 1.0.296 saned[6641]: [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1' saned[6641]: [dll] init: initializing backend `apple' saned[6641]: [dll] init: backend `apple' is version 1.0.0 saned[6641]: [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1' saned[6641]: [dll] init: initializing backend `agfafocus' saned[6641]: [dll] init: backend `agfafocus' is version 1.0.0 saned[6641]: [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1' saned[6641]: [dll] init: initializing backend `abaton' saned[6641]: [dll] init: backend `abaton' is version 1.0.0 saned[6641]: [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1' saned[6641]: [dll] init: initializing backend `net' saned[6641]: [dll] init: backend `net' is version 1.0.24 saned[6641]: [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' saned[6641]: [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' (No such file or directory) saned[6641]: [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1' saned[6641]: [dll] init: initializing backend `hpaio' saned[6641]: [dll] init: backend `hpaio' is version 1.0.0 saned[6641]: io/hpmud/pp.c 627: unable to read device-id ret=-1 saned[6641]: [dll] load: searching backend `ls5000' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' saned[6641]: [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' saned[6641]: [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' saned[6641]: [dll] init: initializing backend `ls5000' saned[6641]: [dll] init: backend `ls5000' is version 1.0.0 saned[6641]: [dll] sane_get_devices: found 0 devices saned[6641]: saned exiting Running saned as root or adding saned user to lp group does not help.
