Package: pulseaudio
Version: 7.0-1
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
No sound after upgrade pulseaudio 7.0-1,
when I run alsamixer:
ALSA lib pulse.c:243:(pulse_connect) PulseAudio: Unable to connect:
Protocol error
cannot open mixer: Connection refused
*** End of the template - remove these template lines ***
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.2.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_HK.utf8, LC_CTYPE=en_HK.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages pulseaudio depends on:
ii adduser 3.113+nmu3
ii libasound2 1.0.29-1
ii libasound2-plugins 1.0.29-1
ii libc6 2.19-22
ii libcap2 1:2.24-11
ii libdbus-1-3 1.10.0-3
ii libfftw3-single3 3.3.4-2
ii libgcc1 1:5.2.1-17
ii libice6 2:1.0.9-1+b1
ii libltdl7 2.4.2-1.11
ii liborc-0.4-0 1:0.4.24-1
ii libpulse0 7.0-1
ii libsm6 2:1.2.2-1+b1
ii libsndfile1 1.0.25-9.1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 5.2.1-17
ii libsystemd0 226-3
ii libtdb1 1.3.7-1
ii libudev1 226-3
ii libwebrtc-audio-processing-0 0.1-3
ii libx11-6 2:1.6.3-1
ii libx11-xcb1 2:1.6.3-1
ii libxcb1 1.10-3+b1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 9.20150917
ii pulseaudio-utils 7.0-1
ii udev 226-3
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 7.0-1
ii rtkit 0.11-2
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
pn pavucontrol <none>
pn pavumeter <none>
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = yes
; lfe-crossover-freq = 120
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
..nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
#load-sample-lazy pulse-hotplug
/usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-coldplug
/usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
..fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
..endif
### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=x11-bell
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
dmix:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample mixing device
dmix:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct sample snooping device
hw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
HDA Intel HDMI, HDMI 0
Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
HDA Intel HDMI, HDMI 1
Hardware device with all software conversions
sysdefault:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Digital
HDMI Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=3
HDA Intel PCH, ALC892 Digital
Direct sample mixing device
dsnoop:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Direct sample snooping device
dsnoop:CARD=PCH,DEV=3
HDA Intel PCH, ALC892 Digital
Direct sample snooping device
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
HDA Intel PCH, ALC892 Digital
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
HDA Intel PCH, ALC892 Digital
Hardware device with all software conversions
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "7.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "7.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "7.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "7.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "7.0"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_03.0"
card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "7.0"
Module #7
Name: module-alsa-card
Argument: device_id="2" name="usb-0c76_USB_Audio_Device-00"
card_name="alsa_card.usb-0c76_USB_Audio_Device-00" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "7.0"
Module #8
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_00_1b.0"
card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "7.0"
Module #9
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "7.0"
Module #10
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "7.0"
Module #11
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "7.0"
Module #12
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "7.0"
Module #13
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "7.0"
Module #14
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "7.0"
Module #15
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "7.0"
Module #16
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "7.0"
Module #17
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "7.0"
Module #18
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "7.0"
Module #19
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "7.0"
Module #20
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "7.0"
Module #21
Name: module-x11-publish
Argument: display=:0.0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 credential publisher"
module.version = "7.0"
Module #22
Name: module-x11-cork-request
Argument: display=:0.0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Synthesize X11 media key events when
cork/uncork is requested"
module.version = "7.0"
Module #23
Name: module-x11-xsmp
Argument: display=:0.0
session_manager=local/redcat:@/tmp/.ICE-unix/2937,unix/redcat:/tmp/.ICE-unix/2937
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "X11 session management"
module.version = "7.0"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.hdmi-stereo
Description: Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xdfc34000 irq 33"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor
HD Audio Controller"
device.form_factor = "internal"
device.string = "hdmi:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Built-in Audio Digital Stereo (HDMI)"
alsa.mixer_name = "Intel Haswell HDMI"
alsa.components = "HDA:80862807,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, not
available)
Active Port: hdmi-output-0
Formats:
pcm
Sink #1
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 31609 / 48% / -19.00 dB, front-right: 31609 /
48% / -19.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdfc30000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8ca0"
device.product.name = "9 Series Chipset Family HD Audio
Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,10438618,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-lineout: Line Out (priority: 9900, available)
analog-output-headphones: Headphones (priority: 9000, not
available)
Active Port: analog-output-lineout
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor
Description: Monitor of Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_03.0.hdmi-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Digital Stereo
(HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xdfc34000 irq 33"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor
HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.usb-0c76_USB_Audio_Device-00.analog-mono
Description: USB Audio Device Analog Mono
Driver: module-alsa-card.c
Sample Specification: s16le 1ch 44100Hz
Channel Map: mono
Owner Module: 7
Mute: no
Volume: mono: 26281 / 40% / -23.81 dB
balance 0.00
Base Volume: 26281 / 40% / -23.81 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "USB Audio Device at usb-0000:00:14.0-9,
full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:9:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/sound/card2"
udev.id = "usb-0c76_USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0c76"
device.vendor.name = "JMTek, LLC."
device.product.id = "160a"
device.product.name = "USB Audio Device"
device.serial = "0c76_USB_Audio_Device"
device.string = "hw:2"
device.buffering.buffer_size = "8816"
device.buffering.fragment_size = "2204"
device.access_mode = "mmap"
device.profile.name = "analog-mono"
device.profile.description = "Analog Mono"
device.description = "USB Audio Device Analog Mono"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB0c76:160a"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Ports:
analog-input-mic: Microphone (priority: 8700)
Active Port: analog-input-mic
Formats:
pcm
Source #2
State: SUSPENDED
Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdfc30000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8ca0"
device.product.name = "9 Series Chipset Family HD Audio
Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #3
State: SUSPENDED
Name: alsa_input.pci-0000_00_1b.0.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 8
Mute: yes
Volume: front-left: 7354 / 11% / -57.00 dB, front-right: 7354 / 11%
/ -57.00 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdfc30000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8ca0"
device.product.name = "9 Series Chipset Family HD Audio
Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC892"
alsa.components = "HDA:10ec0892,10438618,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-front-mic: Front Microphone (priority: 8500, not
available)
analog-input-rear-mic: Rear Microphone (priority: 8200, not
available)
analog-input-linein: Line In (priority: 8100, not available)
Active Port: analog-input-front-mic
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 16
Properties:
application.name = "Login Session 1"
systemd-login.session = "1"
Client #6
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2967"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "xfce4-volumed"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #8
Driver: module-x11-xsmp.c
Owner Module: 23
Properties:
application.name = "XSMP Session on xfce4-session as
2cbf6f6f3-d1e0-495f-a887-1bcdb68d4de5"
xsmp.vendor = "xfce4-session"
xsmp.client.id = "2cbf6f6f3-d1e0-495f-a887-1bcdb68d4de5"
Client #10
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2967"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "xfce4-volumed"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #11
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2967"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "xfce4-volumed"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #12
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "wrapper-1.0"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "3073"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "wrapper-1.0"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #13
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2967"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "xfce4-volumed"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #14
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "wrapper-1.0"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "3073"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "wrapper-1.0"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #15
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2967"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "xfce4-volumed"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #16
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "wrapper-1.0"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "3073"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "wrapper-1.0"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #17
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "xfce4-volumed"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "2967"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "xfce4-volumed"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #18
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "wrapper-1.0"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "3073"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "wrapper-1.0"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #19
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "wrapper-1.0"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "3073"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "wrapper-1.0"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #20
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "wrapper-1.0"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "3073"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "wrapper-1.0"
window.x11.display = ":0.0"
application.language = "en_HK.utf8"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Client #23
Driver: protocol-native.c
Owner Module: 9
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "30"
application.process.id = "15282"
application.process.user = "john"
application.process.host = "redcat"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0.0"
application.process.machine_id =
"05548cacc90247c69683e82553ce5094"
application.process.session_id = "1"
Card #0
Name: alsa_card.pci-0000_00_03.0
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel HDMI"
alsa.long_card_name = "HDA Intel HDMI at 0xdfc34000 irq 33"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:03.0"
sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "0c0c"
device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor
HD Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1,
sources: 0, priority: 5400, available: yes)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 300, available: yes)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output
(sinks: 1, sources: 0, priority: 300, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output
(sinks: 1, sources: 0, priority: 5200, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo,
output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (priority: 5800, latency
offset: 0 usec, available)
Properties:
device.icon_name = "video-display"
device.product.name = "iMercury-22W+"
Part of profile(s): output:hdmi-stereo-extra1
Card #1
Name: alsa_card.usb-0c76_USB_Audio_Device-00
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "2"
alsa.card_name = "USB Audio Device"
alsa.long_card_name = "USB Audio Device at usb-0000:00:14.0-9,
full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:14.0-usb-0:9:1.0"
sysfs.path =
"/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/sound/card2"
udev.id = "usb-0c76_USB_Audio_Device-00"
device.bus = "usb"
device.vendor.id = "0c76"
device.vendor.name = "JMTek, LLC."
device.product.id = "160a"
device.product.name = "USB Audio Device"
device.serial = "0c76_USB_Audio_Device"
device.string = "2"
device.description = "USB Audio Device"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
Profiles:
input:analog-mono: Analog Mono Input (sinks: 0, sources: 1,
priority: 2, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: input:analog-mono
Ports:
analog-input-mic: Microphone (priority: 8700, latency offset: 0
usec)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-mono
Card #2
Name: alsa_card.pci-0000_00_1b.0
Driver: module-alsa-card.c
Owner Module: 8
Properties:
alsa.card = "1"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xdfc30000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8ca0"
device.product.name = "9 Series Chipset Family HD Audio
Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1,
priority: 60, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex
(sinks: 1, sources: 1, priority: 6060, available: yes)
output:analog-surround-21: Analog Surround 2.1 Output (sinks:
1, sources: 0, priority: 800, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround
2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860,
available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks:
1, sources: 0, priority: 700, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround
4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760,
available: yes)
output:analog-surround-41: Analog Surround 4.1 Output (sinks:
1, sources: 0, priority: 800, available: yes)
output:analog-surround-41+input:analog-stereo: Analog Surround
4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860,
available: yes)
output:analog-surround-50: Analog Surround 5.0 Output (sinks:
1, sources: 0, priority: 700, available: yes)
output:analog-surround-50+input:analog-stereo: Analog Surround
5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760,
available: yes)
output:analog-surround-51: Analog Surround 5.1 Output (sinks:
1, sources: 0, priority: 800, available: yes)
output:analog-surround-51+input:analog-stereo: Analog Surround
5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860,
available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1,
sources: 0, priority: 5400, available: yes)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI)
Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5460, available:
yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (priority: 8500,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo
analog-input-rear-mic: Rear Microphone (priority: 8200, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo
analog-input-linein: Line In (priority: 8100, latency offset: 0
usec, not available)
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo,
output:analog-surround-21+input:analog-stereo,
output:analog-surround-40+input:analog-stereo,
output:analog-surround-41+input:analog-stereo,
output:analog-surround-50+input:analog-stereo,
output:analog-surround-51+input:analog-stereo,
output:hdmi-stereo+input:analog-stereo
analog-output-lineout: Line Out (priority: 9900, latency
offset: 0 usec, available)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo, output:analog-surround-21,
output:analog-surround-21+input:analog-stereo, output:analog-surround-40,
output:analog-surround-40+input:analog-stereo, output:analog-surround-41,
output:analog-surround-41+input:analog-stereo, output:analog-surround-50,
output:analog-surround-50+input:analog-stereo, output:analog-surround-51,
output:analog-surround-51+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo,
output:hdmi-stereo+input:analog-stereo
Server String: unix:/run/user/1000/pulse/native
Library Protocol Version: 30
Server Protocol Version: 30
Is Local: yes
Client Index: 24
Tile Size: 65472
User Name: john
Host Name: redcat
Server Name: pulseaudio
Server Version: 7.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
Default Source: alsa_input.pci-0000_00_1b.0.analog-stereo
Cookie: 6d49:d9b7
