Subject: hplip: "filter failed" error when trying to print on HP M1132
Package: hplip
Version: 3.14.6-1+b2
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
Saving output in log file: /home/konst/hp-check.log
HP Linux Imaging and Printing System (ver. 3.14.6)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "canberra-gtk-module"
warning: debian-8.0 version is not supported. Using debian-7.5 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24)
GNU/Linux
Host: sysadmin-debian
Proc: 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24)
GNU/Linux
Distribution: debian 8.0
Bitness: 32 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro 8.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
html=/usr/share/doc/hplip-3.14.6
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 05/29/15 13:55:45
version = 3.14.6
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
policykit Admin-Policy-framework OPTIONAL -
0.105 OK -
gs Ghostscript REQUIRED 7.05
9.06 OK -
network Network-wget OPTIONAL -
1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0
1.0.24 OK -
avahi-utils avahi-utils OPTIONAL -
0.6.31 OK -
dbus DBus REQUIRED -
1.8.16 OK -
cups CUPS REQUIRED 1.1
1.7.5 OK 'CUPS Scheduler is running'
Gtk-Message: Failed to load module "canberra-gtk-module"
Gtk-Message: Failed to load module "canberra-gtk-module"
xsane SANE-GUI OPTIONAL 0.9
0.998 OK -
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0
3.1.8 MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED -
1.0.1 OK -
pil Python-Image-Lib OPTIONAL -
1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0
4.11.2 OK -
libjpeg JPEG-Lib REQUIRED -
- OK -
libpthread POSIX-Threads-Lib REQUIRED -
2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0
1.2.0 OK -
python-devel Python-SDK REQUIRED 2.2
2.7.9 OK -
pyqt4 Python-Qt4 REQUIRED 4.0
4.11.2 OK -
cups-devel CUPS-SDK REQUIRED -
1.7.5 OK -
sane-devel SANE-SDK REQUIRED -
1.0.24 OK -
libusb USB-Lib REQUIRED -
1.0 OK -
sane Scan-Lib REQUIRED -
1.0.24 OK -
cups-image CUPS-Image-Lib REQUIRED -
1.7.5 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9
5.7.2 OK -
python-xml Python-XML-Lib REQUIRED -
2.1.0 OK -
python-notify Desktop-notifications OPTIONAL -
- OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED -
3.14.6 OK -
pcardext PhotoCard-Extension REQUIRED -
3.14.6 OK -
hpmudext IO-Extension REQUIRED -
3.14.6 OK -
-----------------------
| Scan Configuration |
-----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED -
3.14.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED -
3.14.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `v4l:/dev/video0' is a Noname USB Camera virtual device
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-M1132
--------
Type: Unknown
Device URI: smb://BUH-2_PC/HP%20M1132
PPD: /etc/cups/ppd/HP-M1132.ppd
warning: Failed to read /etc/cups/ppd/HP-M1132.ppd ppd file
PPD Description:
Printer status: printer HP-M1132 is idle. enabled since Fri 29 May 2015
01:22:32 PM EEST
Rendering completed
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
error: 'python-reportlab' package is missing/incompatible
Total Errors: 1
Total Warnings: 1
Run 'hp-doctor' command to prompt and fix the issues.
Done.
-- System Information:
Debian Release: 8.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-686-pae (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages hplip depends on:
ii adduser 3.113+nmu3
ii coreutils 8.23-4
ii cups 1.7.5-11
ii hplip-data 3.14.6-1
ii libc6 2.19-18
ii libcups2 1.7.5-11
ii libdbus-1-3 1.8.16-1
ii libhpmud0 3.14.6-1+b2
ii libsane 1.0.24-8
ii libsane-hpaio 3.14.6-1+b2
ii libsnmp30 5.7.2.1+dfsg-1
ii libssl1.0.0 1.0.1k-3
ii libusb-1.0-0 2:1.0.19-1
ii lsb-base 4.1+Debian13+nmu1
ii policykit-1 0.105-8
ii printer-driver-hpcups 3.14.6-1+b2
ii python 2.7.9-1
ii python-dbus 1.2.0-2+b3
ii python-gobject-2 2.28.6-12
ii python-imaging 2.6.1-2
ii python-pexpect 3.2-1
ii python-reportlab 3.1.8-3
ii wget 1.16-1
Versions of packages hplip recommends:
ii avahi-daemon 0.6.31-5
ii printer-driver-postscript-hp 3.14.6-1
ii sane-utils 1.0.24-8
Versions of packages hplip suggests:
pn hplip-doc <none>
pn hplip-gui <none>
ii python-notify 0.1.1-4
ii system-config-printer 1.4.6-1
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
