Package: bluetooth
Version: 5.23-2
Followup-For: Bug #721036
Dear Maintainer,
maybe I have a similar problem.
* What led up to the situation?
I switched on bluetooth mode both at my radio and my laptop.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I successfully connected both, changed audio output to the radio and also
succeeded with this (the sound from the radio speakers was perfect).
* What was the outcome of this action?
But then after some time playback stops.
* What outcome did you expect instead?
Playback to continue.
Maybe this helps:
$ dmesg
[...]
[ 2187.024267] input: 40:EF:4C:16:2D:7A as /devices/virtual/input/input16
[ 2196.046653] Bluetooth: hci0 command 0x0c1a tx timeout
[ 2198.068714] Bluetooth: hci0 command 0x0402 tx timeout
[ 2230.733089] usb 1-1.5: USB disconnect, device number 3
[ 2230.942049] usb 1-1.5: new full-speed USB device number 6 using ehci-pci
[ 2231.034965] usb 1-1.5: No LPM exit latency info found, disabling LPM.
[ 2231.036773] usb 1-1.5: New USB device found, idVendor=8087, idProduct=0a2a
[ 2231.036777] usb 1-1.5: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2231.055548] Bluetooth: hci0: read Intel version: 370810011002270d0d
[ 2231.055552] Bluetooth: hci0: Intel device is already patched. patch num: 0d
[ 2272.234899] Bluetooth: Failed to start inquiry: status 12
[ 2305.021110] Bluetooth: hci0 command 0x0402 tx timeout
[ 2355.311979] Bluetooth: hci0 command 0x200c tx timeout
$ hcidump
HCI sniffer - Bluetooth packet analyzer ver 5.23
device: hci0 snap_len: 1500 filter: 0xffffffffffffffff
[...]
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
> HCI Event: Command Complete (0x0e) plen 4
LE Set Random Address (0x08|0x0005) ncmd 1
status 0x00
> HCI Event: Command Complete (0x0e) plen 4
LE Set Scan Parameters (0x08|0x000b) ncmd 1
status 0x00
> HCI Event: Command Complete (0x0e) plen 4
LE Set Scan Enable (0x08|0x000c) ncmd 2
status 0x00
> HCI Event: Command Complete (0x0e) plen 4
LE Set Scan Enable (0x08|0x000c) ncmd 2
status 0x00
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 2
> HCI Event: Extended Inquiry Result (0x2f) plen 255
bdaddr 40:EF:4C:16:2D:7A mode 1 clkoffset 0x7d6a class 0x240404 rssi -76
Shortened local name: 'TechniSat'
TX power level: 4
Complete service classes: 0x111e 0x1108 0x110b 0x110d 0x110e
> HCI Event: Extended Inquiry Result (0x2f) plen 255
bdaddr 40:EF:4C:16:2D:7A mode 1 clkoffset 0x7d69 class 0x240404 rssi -68
Shortened local name: 'TechniSat'
TX power level: 4
Complete service classes: 0x111e 0x1108 0x110b 0x110d 0x110e
> HCI Event: Extended Inquiry Result (0x2f) plen 255
bdaddr 40:EF:4C:16:2D:7A mode 1 clkoffset 0x7d6a class 0x240404 rssi -61
Shortened local name: 'TechniSat'
TX power level: 4
Complete service classes: 0x111e 0x1108 0x110b 0x110d 0x110e
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
^C
-- System Information:
Debian Release: 8.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages bluetooth depends on:
ii bluez 5.23-2+b1
bluetooth recommends no packages.
Versions of packages bluetooth suggests:
pn bluez-cups <none>
ii bluez-obexd 5.23-2+b1
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
