Package: installation-reports Debian-installer-version: from debian.org on 12/16/05 uname -a: Linux Knoppix 2.4.27 #2 SMP Mo Aug 9 00:39:37 CEST 2004 i686 GNU/Linux Date: 12/17/05, 11am PST Method: Installation from floppy
Machine: Dell INSPIRON 8100 Processor: Pentium III Memory: 512MB Root Device: /dev/hda1 Root Size/partition table: Device Boot Start End Blocks Id System /dev/hda1 * 1 146 1172713+ 83 Linux /dev/hda2 147 207 489982+ 82 Linux swap /dev/hda3 208 2432 17872312+ 83 Linux Output of lspci and lspci -n: [EMAIL PROTECTED] lspci 0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and MemoryController Hub (rev 04) 0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 03) 0000:00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03) 0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2) 0000:02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10) 0000:02:06.0 PCI bridge: Actiontec Electronics Inc Mini-PCI bridge (rev 11) 0000:02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 0000:02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 0000:02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller 0000:08:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) 0000:08:08.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01) [EMAIL PROTECTED] lspci -n 0000:00:00.0 0600: 8086:1130 (rev 04) 0000:00:01.0 0604: 8086:1131 (rev 04) 0000:00:1e.0 0604: 8086:2448 (rev 03) 0000:00:1f.0 0601: 8086:244c (rev 03) 0000:00:1f.1 0101: 8086:244a (rev 03) 0000:00:1f.2 0c03: 8086:2442 (rev 03) 0000:01:00.0 0300: 10de:0112 (rev b2) 0000:02:03.0 0401: 125d:1998 (rev 10) 0000:02:06.0 0604: 1668:0100 (rev 11) 0000:02:0f.0 0607: 104c:ac42 0000:02:0f.1 0607: 104c:ac42 0000:02:0f.2 0c00: 104c:8027 0000:08:04.0 0200: 8086:1229 (rev 08) 0000:08:08.0 0780: 11c1:0448 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [E] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: I made three floppy drives (boot, root, and net-drivers). It booted well, read the root drive, asked for a driver diskette. I put the "net-drivers" diskette and it went pretty well until it started configuring PCI (or CardBus, I don't remember exactly) and stucked at 93% (as I remember). No PCMCIA card was inserted in the machine. I had the exactly same experience about a month ago where I tried to boot from floppy and install from a USB driver. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
