Package: src:linux
Version: 3.16.7-ckt7-1
Followup-For: Bug #779600
Dear Maintainer,
Well, it turns out that the framebuffer contains the proper colors:
,----[ fbcat | ppmhist ]
| r g b lum count
| ----- ----- ----- ----- -------
| 0 0 0 0 1945537
| 170 170 170 170 112890
| 255 255 255 255 10772
| 170 85 0 101 1471
| 255 255 85 236 926
| 0 170 170 119 704
| 170 0 170 70 624
| 85 85 85 85 397
| 0 170 0 100 273
| 85 255 255 204 6
`----
but somehow they just don't look that way on my TV. I tried resetting
the color settings on the TV but it didn't help.
Really wish I could spy on the HDMI output to see if the colors are
already screwed up or not :-(
Any information on how to check what transformations are being done to
the framebuffer data before it's sent over the HDMI would be greatly
appreciated.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=/dev/mapper/Group1-ROOT ro
** Not tainted
** Kernel log:
[ 3.196403] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00
PQ: 0 ANSI: 0
[ 3.196695] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.197802] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.335820] Switched to clocksource tsc
[ 3.832585] random: nonblocking pool is initialized
[ 4.486634] systemd-udevd[317]: starting version 215
[ 5.240221] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 5.240308] ACPI: Power Button [PWRB]
[ 5.240630] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.240712] ACPI: Power Button [PWRF]
[ 5.351248] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.382006] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 5.419268] ACPI Warning: SystemIO range 0x0000f040-0x0000f05f conflicts
with OpRegion 0x0000f040-0x0000f04f (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-258)
[ 5.419431] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 5.640934] [drm] Initialized drm 1.1.0 20060810
[ 5.689211] alg: No test for crc32 (crc32-pclmul)
[ 5.705872] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.997601] [drm] Memory usable by graphics device = 2048M
[ 5.997668] [drm] Replacing VGA console driver
[ 5.998188] Console: switching to colour dummy device 80x25
[ 6.016227] cfg80211: Calling CRDA to update world regulatory domain
[ 6.018714] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 6.018723] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.018726] [drm] Driver supports precise vblank timestamp query.
[ 6.018749] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.094245] fbcon: inteldrmfb (fb0) is primary device
[ 6.119847] Console: switching to colour frame buffer device 240x67
[ 6.124821] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.124846] i915 0000:00:02.0: registered panic notifier
[ 6.163404] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.163606] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.163692] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.164075] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 6.164113] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 6.446096] sound hdaudioC1D0: autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:line
[ 6.446133] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.446159] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.446183] sound hdaudioC1D0: mono: mono_out=0x0
[ 6.446203] sound hdaudioC1D0: inputs:
[ 6.446220] sound hdaudioC1D0: Front Mic=0x19
[ 6.446240] sound hdaudioC1D0: Rear Mic=0x18
[ 6.446260] sound hdaudioC1D0: Line=0x1a
[ 6.450614] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 6.454684] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 6.454761] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 6.454830] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 6.454897] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 6.454967] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 6.458776] iTCO_vendor_support: vendor-support=0
[ 6.459282] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.459331] iTCO_wdt: Found a Lynx Point TCO device (Version=2,
TCOBASE=0x1860)
[ 6.459429] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.834273] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223
detected
[ 6.837897] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5392 detected
[ 6.943901] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.802188] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 9.545320] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 9.883642] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 10.316723] lp: driver loaded but no devices found
[ 10.425171] ppdev: user-space parallel port driver
[ 10.472132] tun: Universal TUN/TAP device driver, 1.6
[ 10.472159] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 10.535228] it87: Found IT8728F chip at 0xa30, revision 2
[ 10.535268] it87: Beeping is supported
[ 10.622045] fuse init (API version 7.23)
[ 11.040843] device-mapper: thin: Data device (dm-3) discard unsupported:
Disabling discard passdown.
[ 11.362203] Adding 4194300k swap on /dev/mapper/Group1-SWAP. Priority:-1
extents:1 across:4194300k FS
[ 542.325312] EXT4-fs (dm-7): mounting ext3 file system using the ext4
subsystem
[ 542.346739] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts:
(null)
[ 542.501351] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
(null)
[ 543.210809] Bridge firewalling registered
[ 543.222663] device eth0 entered promiscuous mode
[ 543.232504] r8169 0000:02:00.0: firmware: failed to load
rtl_nic/rtl8168g-2.fw (-2)
[ 543.233637] r8169 0000:02:00.0: Direct firmware load failed with error -2
[ 543.234755] r8169 0000:02:00.0: Falling back to user helper
[ 543.236196] r8169 0000:02:00.0 eth0: unable to load firmware patch
rtl_nic/rtl8168g-2.fw (-12)
[ 543.246354] r8169 0000:02:00.0 eth0: link down
[ 543.247497] r8169 0000:02:00.0 eth0: link down
[ 543.248640] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 543.250387] device tap0 entered promiscuous mode
[ 543.252047] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 543.254242] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 545.127642] r8169 0000:02:00.0 eth0: link up
[ 545.131909] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 545.136377] br0: port 1(eth0) entered forwarding state
[ 545.140609] br0: port 1(eth0) entered forwarding state
[ 545.144819] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 549.732582] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 549.762327] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 549.799380] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 549.913931] nr_pdflush_threads exported in /proc is scheduled for removal
[ 549.913998] sysctl: The scan_unevictable_pages sysctl/node-interface has
been disabled for lack of a legitimate use case. If you have one, please send
an email to linux...@kvack.org.
[ 560.145351] br0: port 1(eth0) entered forwarding state
[ 835.647984] systemd-logind[4859]: New seat seat0.
[ 835.661017] systemd-logind[4859]: Watching system buttons on
/dev/input/event3 (Power Button)
[ 835.661055] systemd-logind[4859]: Watching system buttons on
/dev/input/event5 (Video Bus)
[ 835.661087] systemd-logind[4859]: Watching system buttons on
/dev/input/event2 (Power Button)
[ 835.664385] systemd-logind[4859]: Failed to start user service: Unknown
unit: user@1000.service
[ 835.666524] systemd-logind[4859]: New session 5 of user naesten.
[ 1675.954338] systemd-logind[4859]: New session 10 of user naesten.
** Model information
not available
** Loaded modules:
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
autofs4
binfmt_misc
xt_hl
ip6t_rt
xt_tcpudp
ipt_MASQUERADE
nf_nat_ftp
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
xt_TCPMSS
xt_LOG
ip6t_REJECT
ipt_REJECT
ip6table_mangle
iptable_mangle
xt_multiport
xt_state
xt_limit
xt_conntrack
nf_conntrack_ftp
nf_conntrack_ipv6
nf_defrag_ipv6
nf_conntrack
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
bridge
stp
llc
dm_thin_pool
dm_persistent_data
dm_bio_prison
dm_bufio
libcrc32c
fuse
it87
hwmon_vid
tun
parport_pc
ppdev
lp
parport
arc4
rt2800pci
rt2800mmio
x86_pkg_temp_thermal
rt2800lib
intel_powerclamp
intel_rapl
rt2x00pci
rt2x00mmio
rt2x00lib
coretemp
eeprom_93cx6
mac80211
kvm_intel
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
kvm
snd_hda_intel
snd_hda_controller
snd_hda_codec
cfg80211
i915
snd_hwdep
snd_pcm_oss
drm_kms_helper
crc_ccitt
snd_mixer_oss
pcspkr
crc32_pclmul
rfkill
snd_pcm
drm
joydev
evdev
psmouse
lpc_ich
snd_timer
serio_raw
snd
i2c_algo_bit
mfd_core
i2c_i801
mei_me
mei
soundcore
i2c_core
shpchp
battery
video
button
processor
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
dm_mod
usb_storage
sg
sd_mod
crc_t10dif
sr_mod
cdrom
crct10dif_generic
crct10dif_common
ahci
libahci
crc32c_intel
libata
scsi_mod
r8169
mii
fan
thermal
thermal_sys
ehci_pci
ehci_hcd
xhci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM
Controller [8086:0c00] (rev 06)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th
Gen Core Processor Integrated Graphics Controller [8086:0402] (rev 06) (prog-if
00 [VGA controller])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7e1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset
High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #5 [8086:8c18] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation C220 Series Chipset Family H81
Express LPC Controller [8086:8c5c] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset
Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family
SMBus Controller [8086:8c22] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Elitegroup Computer Systems Device [1019:8116]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Ralink corp. RT5392 PCIe Wireless Network
Adapter [1814:5392]
Subsystem: Ralink corp. RT5392 PCIe Wireless Network Adapter [1814:5392]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
** USB devices:
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0e8f:0022 GreenAsia Inc.
Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-3.16.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
ii libc6-i686 2.19-15
Versions of packages linux-image-3.16.0-4-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 2.02~beta2-20
ii linux-doc-3.16 3.16.7-ckt4-3
Versions of packages linux-image-3.16.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae:
linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae:
false
linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae:
true
--
Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread!
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
