Package: src:linux
Version: 3.2.65-1+deb7u1
Severity: important
Module ath5k fails to initialise my wireless card. Card was working under
Ubuntu 10.04. The error message (Invalid EEPROM checksum) was introduced
in the driver around the 2.6.32 timeframe. The initial checksumming code
was too strict, or rather did not take account of what were considered
non-standard EEPROM sizes. But this bug was supposed to be fixed eons
ago; I don't understand why I still have this issue in a 3.2.0 kernel.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-486 (debian-ker...@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.65-1+deb7u1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486
root=UUID=fd6a64ef-449e-4a0e-881e-cd952829baab ro console=ttyS0,9600n8 quiet
** Not tainted
** Kernel log:
[ 7.850170] cpuidle: using governor ladder
[ 7.850219] cpuidle: using governor menu
[ 7.854070] TCP cubic registered
[ 7.854753] NET: Registered protocol family 10
[ 7.865137] Mobile IPv6
[ 7.865211] NET: Registered protocol family 17
[ 7.865353] Registering the dns_resolver key type
[ 7.865590] Using IPI Shortcut mode
[ 7.869046] PM: Hibernation image not present or could not be loaded.
[ 7.869297] registered taskstats version 1
[ 7.871104] rtc_cmos rtc_cmos: setting system clock to 2015-01-15
18:18:48 UTC (1421345928)
[ 7.871983] Initializing network drop monitor service
[ 7.874029] Freeing unused kernel memory: 456k freed
[ 7.879848] Write protecting the kernel text: 2604k
[ 7.880337] Write protecting the kernel read-only data: 1032k
[ 8.170902] udevd[42]: starting version 175
[ 8.212772] Switching to clocksource tsc
[ 8.804101] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 8.804144] originally by Donald Becker <bec...@scyld.com>
[ 8.804172] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 8.936152] natsemi eth0: NatSemi DP8381[56] at 0xa0000000
(0000:00:06.0), 00:00:24:c4:3e:ec, IRQ 10, port TP.
[ 9.101052] natsemi eth1: NatSemi DP8381[56] at 0xa0001000
(0000:00:07.0), 00:00:24:c4:3e:ed, IRQ 10, port TP.
[ 9.224980] natsemi eth2: NatSemi DP8381[56] at 0xa0002000
(0000:00:08.0), 00:00:24:c4:3e:ee, IRQ 10, port TP.
[ 9.593931] SCSI subsystem initialized
[ 9.623866] usbcore: registered new interface driver usbfs
[ 9.624477] usbcore: registered new interface driver hub
[ 9.649381] usbcore: registered new device driver usb
[ 9.713904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.834033] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.834514] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 9.834888] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 1
[ 9.835263] ohci_hcd 0000:00:13.0: irq 5, io mem 0xa0020000
[ 9.891055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.891143] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 9.891206] usb usb1: Product: OHCI Host Controller
[ 9.891261] usb usb1: Manufacturer: Linux 3.2.0-4-486 ohci_hcd
[ 9.891316] usb usb1: SerialNumber: 0000:00:13.0
[ 9.894766] hub 1-0:1.0: USB hub found
[ 9.894926] hub 1-0:1.0: 3 ports detected
[ 10.157744] libata version 3.00 loaded.
[ 10.180147] pata_sc1200 0000:00:12.2: setting latency timer to 64
[ 10.236893] scsi0 : pata_sc1200
[ 10.241831] scsi1 : pata_sc1200
[ 10.243552] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000
irq 14
[ 10.243630] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xe008
irq 15
[ 10.405635] ata1.00: CFA: SanDisk SDCFH2-004G, HDX 4.32, max MWDMA2
[ 10.405721] ata1.00: 8027712 sectors, multi 0: LBA
[ 10.406884] ata1.00: configured for MWDMA2
[ 10.409227] scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFH2-0
HDX PQ: 0 ANSI: 5
[ 10.571768] Clocksource tsc unstable (delta = -140933152 ns)
[ 10.576220] Switching to clocksource pit
[ 10.590974] sd 0:0:0:0: [sda] 8027712 512-byte logical blocks: (4.11
GB/3.82 GiB)
[ 10.593580] sd 0:0:0:0: [sda] Write Protect is off
[ 10.593672] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.599772] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 10.618807] sda: sda1 sda2 < sda5 >
[ 10.633559] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 10.686078] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.722191] PM: Starting manual resume from disk
[ 11.722270] PM: Hibernation image partition 8:5 present
[ 11.722321] PM: Looking for hibernation image.
[ 11.725199] PM: Image not found (code -22)
[ 11.725264] PM: Hibernation image not present or could not be loaded.
[ 12.113559] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 16.490228] udevd[245]: starting version 175
[ 18.231812] scx200: NatSemi SCx200 Driver
[ 18.280478] scx200: GPIO base 0x6100
[ 18.280681] scx200: Configuration Block base 0x6000
[ 19.429127] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 19.475802] cfg80211: Calling CRDA to update world regulatory domain
[ 20.838319] Error: Driver 'pcspkr' is already registered, aborting...
[ 21.475838] ath5k 0000:00:0e.0: registered as 'phy0'
[ 21.834866] ath5k phy0: Invalid EEPROM checksum: 0x0000 eep_max:
0x0340 (default size)
[ 21.837876] ath5k phy0: unable to init EEPROM
[ 22.362137] ath5k: probe of 0000:00:0e.0 failed with error -5
[ 22.586142] cfg80211: World regulatory domain updated:
[ 22.586217] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 22.586295] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm)
[ 22.586365] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm)
[ 22.586435] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm)
[ 22.586505] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz),
(N/A, 2000 mBm)
[ 22.586576] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz),
(N/A, 2000 mBm)
[ 22.586646] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm)
[ 22.586717] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm)
[ 22.586786] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000
KHz), (N/A, 0 mBm)
[ 28.240473] Adding 215036k swap on /dev/sda5. Priority:-1 extents:1
across:215036k
[ 28.579473] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 29.489360] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 30.862125] loop: module loaded
[ 49.908003] eth0: DSPCFG accepted after 0 usec.
[ 49.908076] eth0: link up.
[ 49.908194] eth0: Setting full-duplex based on negotiated link
capability.
[ 53.185639] RPC: Registered named UNIX socket transport module.
[ 53.185717] RPC: Registered udp transport module.
[ 53.185766] RPC: Registered tcp transport module.
[ 53.185817] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 53.308211] FS-Cache: Loaded
[ 53.620253] FS-Cache: Netfs 'nfs' registered for caching
[ 53.771903] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 60.674595] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
evdev
ath5k
ath
mac80211
snd_pcm
snd_page_alloc
snd_timer
snd
soundcore
cfg80211
pcspkr
rfkill
scx200
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
ata_generic
pata_sc1200
libata
ohci_hcd
ehci_hcd
usbcore
scsi_mod
usb_common
natsemi
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.192.168
netmask 255.255.255.0
broadcast 192.168.192.255
network 192.168.192.0
gateway 192.168.192.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether 00:00:24:c4:3e:ec brd ff:ff:ff:ff:ff:ff
inet 192.168.192.168/24 brd 192.168.192.255 scope global eth0
inet6 fe80::200:24ff:fec4:3eec/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:00:24:c4:3e:ed brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:00:24:c4:3e:ee brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
eth2: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
eth0: 203247 2292 0 0 0 0 0 0
329000 1903 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2215 total packets received
0 forwarded
0 incoming packets discarded
2215 incoming packets delivered
1819 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
15 active connections openings
3 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
2045 segments received
1589 segments send out
60 segments retransmited
0 bad segments received.
0 resets sent
Udp:
170 packets received
0 packets to unknown port received.
0 packet receive errors
170 packets sent
UdpLite:
TcpExt:
19 delayed acks sent
1 delayed acks further delayed because of locked socket
2 packets directly queued to recvmsg prequeue.
252 packet headers predicted
112 acknowledgments not containing data payload received
1298 predicted acknowledgments
12 other TCP timeouts
IpExt:
InOctets: 167617
OutOctets: 299722
** PCI devices:
00:00.0 Host bridge [0600]: Cyrix Corporation PCI Master [1078:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:06.0 Ethernet controller [0200]: National Semiconductor Corporation
DP83815 (MacPhyter) Ethernet Controller [100b:0020]
Subsystem: National Semiconductor Corporation DP83815 (MacPhyter)
Ethernet Controller [100b:0020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 63 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e100 [size=256]
Region 1: Memory at a0000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 3f000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: natsemi
00:07.0 Ethernet controller [0200]: National Semiconductor Corporation
DP83815 (MacPhyter) Ethernet Controller [100b:0020]
Subsystem: National Semiconductor Corporation DP83815 (MacPhyter)
Ethernet Controller [100b:0020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 63 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e200 [size=256]
Region 1: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 08000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: natsemi
00:08.0 Ethernet controller [0200]: National Semiconductor Corporation
DP83815 (MacPhyter) Ethernet Controller [100b:0020]
Subsystem: National Semiconductor Corporation DP83815 (MacPhyter)
Ethernet Controller [100b:0020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 63 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e300 [size=256]
Region 1: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 08010000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: natsemi
00:0e.0 Ethernet controller [0200]: Atheros Communications Inc.
AR5212/AR5213 Wireless Network Adapter [168c:0013] (rev 01)
Subsystem: Wistron NeWeb Corp. CM9 Wireless a/b/g MiniPCI Adapter
[185f:1012]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at a0010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
00:12.0 ISA bridge [0601]: National Semiconductor Corporation SC1100
Bridge [100b:0510]
Subsystem: National Semiconductor Corporation GPIO and LPC support
bridge [100b:0500]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 63, Cache Line Size: 32 bytes
Region 0: I/O ports at 6100 [size=64]
Region 1: I/O ports at 6200 [size=64]
Kernel driver in use: scx200
00:12.1 Bridge [0680]: National Semiconductor Corporation SC1100 SMI &
ACPI [100b:0511]
Subsystem: National Semiconductor Corporation SC1100 SMI & ACPI bridge
[100b:0501]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 6300 [size=256]
00:12.2 IDE interface [0101]: National Semiconductor Corporation SCx200,
SC1100 IDE controller [100b:0502] (rev 01) (prog-if 80 [Master])
Subsystem: National Semiconductor Corporation IDE Controller [100b:0502]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at e000 [size=16]
Kernel driver in use: pata_sc1200
00:12.5 Bridge [0680]: National Semiconductor Corporation SC1100 XBus
[100b:0515]
Subsystem: National Semiconductor Corporation SC1100 PCI to XBus bridge
[100b:0505]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 6500 [size=64]
Kernel driver in use: scx200
00:13.0 USB controller [0c03]: Compaq Computer Corporation ZFMicro
Chipset USB [0e11:a0f8] (rev 08) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation ZFMicro Chipset USB [0e11:a0f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 56 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 0: Memory at a0020000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
** USB devices:
not available
-- System Information:
Debian Release: 7.8
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i586)
Kernel: Linux 3.2.0-4-486
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-486 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-486 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-486 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-486 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-486/prerm/removing-running-kernel-3.2.0-4-486: true
linux-image-3.2.0-4-486/postinst/missing-firmware-3.2.0-4-486:
linux-image-3.2.0-4-486/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-486/postinst/depmod-error-initrd-3.2.0-4-486: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
