Hi, i am the developer of libburn which issued the error message underneath xfburn.
The problem seems to be between drive and libburn. xfburn itself has only a minor part in it. > ** (xfburn:3769): WARNING **: Read-only profile 0x8! Your drives tells libburn that the loaded medium can only perform CD-ROM actions. I.e. it is a CD-ROM or a closed CD-R or closed CD-RW. > ** (xfburn:3769): WARNING **: [FATAL] 131357: SCSI error on > write(32,16): [5 24 00] Illegal request. Invalid field in cdb. (0) When xfburn requested write operations, nevertheless, the drive complained that this was not allowed. I would assume that xfburn should bail out already at the first problem. If the drive says the medium is read-only, then it will hardly be willing to perform a burn session. > Had to install the K libraries :-( Does that mean K3B worked with the same medium ? Well, if you are sure that the medium used is writable, then please post the output of the following commands. I assume your drive's address is /dev/sr0: xorriso -scsi_log on -outdev /dev/sr0 -toc 2>&1 | tee -i /tmp/xorriso_log wodim -V -v dev=/dev/sr0 -toc 2>&1 | tee -i /tmp/wodim_log xorriso uses libburn, wodim does not. In case that it is indeed no CD but a DVD or BD, then use instead of the wodim command. dvd+rw-mediainfo /dev/sr0 -verbous 2>&1 | tee -i /tmp/mediainfo_log Have a nice day :) Thomas -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
