Package: src:linux
Version: 3.16.7-ckt2-1
Severity: important
Dear Maintainer,
After a recent jessie upgrade, I noticed that whenever I try to shutdown my
machine, it turns off, and then about five seconds later it turns on again
and boots up. The only way I can get it to turn off is to go into GRUB and
boot from an older Linux kernel (e.g. 3.16.3) and then shutdown.
Thanks,
Deepee
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version
4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=ba204753-6608-46bb-bda6-63b8570c728c ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 4.205896] usb 2-7: new high-speed USB device number 4 using xhci_hcd
[ 4.315917] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64,
EC=10 00 64
[ 4.470211] Switched to clocksource tsc
[ 4.473684] usb 2-7: New USB device found, idVendor=05c8, idProduct=0369
[ 4.473686] usb 2-7: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.473687] usb 2-7: Product: HP HD Webcam
[ 4.473688] usb 2-7: Manufacturer: SunplusIT INC.
[ 4.498498] input: HP WMI hotkeys as /devices/virtual/input/input17
[ 4.561769] media: Linux media interface: v0.10
[ 4.564019] Linux video capture interface: v2.00
[ 4.568148] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
[ 4.576814] input: HP HD Webcam as
/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input18
[ 4.576904] usbcore: registered new interface driver uvcvideo
[ 4.576905] USB Video Class driver (1.1.1)
[ 4.630428] usb 2-3.2: new full-speed USB device number 5 using xhci_hcd
[ 4.642515] Console: switching to colour frame buffer device 240x67
[ 4.646891] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.646892] i915 0000:00:02.0: registered panic notifier
[ 4.672131] RPC: Registered named UNIX socket transport module.
[ 4.672134] RPC: Registered udp transport module.
[ 4.672135] RPC: Registered tcp transport module.
[ 4.672135] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.674371] FS-Cache: Loaded
[ 4.678857] FS-Cache: Netfs 'nfs' registered for caching
[ 4.683930] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 4.719616] usb 2-3.2: New USB device found, idVendor=8087,
idProduct=07dc
[ 4.719620] usb 2-3.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 4.726012] vboxdrv: Found 4 processor cores.
[ 4.726746] vboxdrv: fAsync=0 offMin=0x1bc offMax=0x10e6
[ 4.726920] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 4.726922] vboxdrv: Successfully loaded version 4.3.18_Debian
(interface 0x001a0008).
[ 4.742018] Bluetooth: Core ver 2.19
[ 4.742037] NET: Registered protocol family 31
[ 4.742038] Bluetooth: HCI device and connection manager initialized
[ 4.742047] Bluetooth: HCI socket layer initialized
[ 4.742049] Bluetooth: L2CAP socket layer initialized
[ 4.742060] Bluetooth: SCO socket layer initialized
[ 4.748592] usbcore: registered new interface driver btusb
[ 4.750693] vboxpci: IOMMU not found (not registered)
[ 4.762779] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4.763410] bluetooth hci0: firmware: direct-loading firmware
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4.763416] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4.792439] cfg80211: Calling CRDA to update world regulatory domain
[ 4.804715] cfg80211: World regulatory domain updated:
[ 4.804717] cfg80211: DFS Master region: unset
[ 4.804719] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.804721] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 4.804722] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 4.804723] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 4.804724] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A,
2000 mBm), (N/A)
[ 4.804725] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 4.804726] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 4.804727] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 4.804729] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 4.816993] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio2/input/input15
[ 4.822642] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.871950] Bluetooth: hci0: Intel Bluetooth firmware patch completed
and activated
[ 4.930193] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.930195] Bluetooth: BNEP filters: protocol multicast
[ 4.930201] Bluetooth: BNEP socket layer initialized
[ 5.022177] e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
[ 5.122986] e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
[ 5.123087] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.351284] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input20
[ 5.368783] ACPI: Video Device [GFX0] (multi-head: yes rom: no post:
no)
[ 5.368901] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21
[ 5.368989] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 5.369240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.370304] random: nonblocking pool is initialized
[ 5.370435] ACPI Warning: SystemIO range
0x000000000000ef80-0x000000000000ef9f conflicts with OpRegion
0x000000000000ef80-0x000000000000ef8f (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-258)
[ 5.370442] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 5.372898] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 5.372901] Copyright(c) 2003- 2014 Intel Corporation
[ 5.373051] iwlwifi 0000:02:00.0: irq 66 for MSI/MSI-X
[ 5.373624] iTCO_vendor_support: vendor-support=0
[ 5.375187] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X
[ 5.375284] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.375319] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2,
TCOBASE=0x1860)
[ 5.375636] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.375879] iwlwifi 0000:02:00.0: firmware: direct-loading firmware
iwlwifi-7260-9.ucode
[ 5.376049] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0
op_mode iwlmvm
[ 5.386454] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 5.386586] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 5.386650] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 5.387924] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N
7260, REV=0x144
[ 5.387974] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.388193] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.604618] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 5.611298] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.611530] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 5.622556] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.654050] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id:
0x1e2b1, caps: 0xd00123/0x840300/0x26800, board id: 2768, fw id: 1478018
[ 5.692024] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio3/input/input19
[ 9.310088] wlan0: authenticate with 00:18:e7:f2:5a:bc
[ 9.313347] wlan0: send auth to 00:18:e7:f2:5a:bc (try 1/3)
[ 9.315217] wlan0: authenticated
[ 9.315585] wlan0: associate with 00:18:e7:f2:5a:bc (try 1/3)
[ 9.318960] wlan0: RX AssocResp from 00:18:e7:f2:5a:bc (capab=0x431
status=0 aid=2)
[ 9.319947] wlan0: associated
[ 9.319972] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 840 G1
product_version: A3009DD10303
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: L71 Ver. 01.20
board_vendor: Hewlett-Packard
board_name: 198F
board_version: KBC Version 15.55
** Loaded modules:
ctr
ccm
joydev
arc4
iwlmvm
snd_hda_codec_hdmi
mac80211
rtsx_pci_ms
memstick
iTCO_wdt
iTCO_vendor_support
iwlwifi
bnep
cfg80211
pci_stub
vboxpci(O)
ecb
btusb
vboxnetadp(O)
bluetooth
6lowpan_iphc
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
hp_wmi
sparse_keymap
rfkill
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
pcspkr
evdev
psmouse
serio_raw
tpm_infineon
snd_hda_codec_idt
snd_hda_codec_generic
i2c_i801
shpchp
lpc_ich
wmi
battery
snd_hda_intel
snd_hda_controller
i915
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
drm_kms_helper
snd_pcm
drm
hp_accel
snd_timer
lis3lv02d
i2c_algo_bit
video
input_polldev
snd
mei_me
i2c_core
tpm_tis
intel_smartconnect
soundcore
hp_wireless
mei
tpm
ac
button
processor
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
rtsx_pci_sdmmc
mmc_core
ahci
libahci
crct10dif_pclmul
crct10dif_common
crc32c_intel
rtsx_pci
mfd_core
libata
scsi_mod
ehci_pci
ehci_hcd
xhci_hcd
e1000e
ptp
pps_core
usbcore
usb_common
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN group default qlen 1000
link/ether 8c:dc:d4:d1:10:ff brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 1000
link/ether f8:16:54:73:c6:89 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.191/24 brd 192.168.0.255 scope global dynamic wlan0
valid_lft 85298sec preferred_lft 85298sec
inet6 fe80::fa16:54ff:fe73:c689/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
wlan0: 7894583 8672 0 0 0 0 0 0
1152519 5804 0 0 0 0 0 0
lo: 29600 207 0 0 0 0 0 0
29600 207 0 0 0 0 0 0
*** Protocol statistics:
Ip:
6584 total packets received
0 forwarded
0 incoming packets discarded
6506 incoming packets delivered
5916 requests sent out
32 outgoing packets dropped
2 dropped because of missing route
Icmp:
72 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 72
72 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 72
IcmpMsg:
InType3: 72
OutType3: 72
Tcp:
173 active connections openings
3 passive connection openings
4 failed connection attempts
7 connection resets received
6 connections established
5594 segments received
5009 segments send out
16 segments retransmited
5 bad segments received.
100 resets sent
Udp:
785 packets received
72 packets to unknown port received.
0 packet receive errors
858 packets sent
UdpLite:
TcpExt:
35 TCP sockets finished time wait in fast timer
111 delayed acks sent
Quick ack mode was activated 16 times
1 packets directly queued to recvmsg prequeue.
672 bytes directly in process context from backlog
3062 packet headers predicted
1 packets header predicted and directly queued to user
833 acknowledgments not containing data payload received
492 predicted acknowledgments
1 congestion windows recovered without slow start after partial ack
2 other TCP timeouts
TCPLossProbes: 16
TCPLossProbeRecovery: 4
16 DSACKs sent for old packets
8 DSACKs received
13 connections reset due to unexpected data
7 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 2
TCPSackShiftFallback: 27
TCPRetransFail: 2
TCPRcvCoalesce: 670
TCPOFOQueue: 122
TCPChallengeACK: 5
TCPSYNChallenge: 5
TCPSpuriousRtxHostQueues: 2
TCPAutoCorking: 201
TCPOrigDataSent: 1460
IpExt:
InMcastPkts: 28
OutMcastPkts: 30
InBcastPkts: 99
OutBcastPkts: 74
InOctets: 7680174
OutOctets: 962301
InMcastOctets: 4418
OutMcastOctets: 4498
InBcastOctets: 12782
OutBcastOctets: 10582
InNoECTPkts: 8901
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 65
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio
Controller [8086:0a0c] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 67
Region 0: Memory at d0730000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at d0720000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0
[8086:9c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 63
Region 0: Memory at d0739000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 8 Series HECI KT
[8086:9c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: I/O ports at 30b0 [size=8]
Region 1: Memory at d073f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
I218-LM [8086:155a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 59
Region 0: Memory at d0700000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d073e000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller
[8086:9c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 64
Region 0: Memory at d0734000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port
1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0600000-d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port
4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port
6 [8086:9c1a] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0400000-d04fffff
Prefetchable memory behind bridge: 00000000bf300000-00000000bf4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1
[8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d073d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller
[8086:9c43] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller
1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 62
Region 0: I/O ports at 30a8 [size=8]
Region 1: I/O ports at 30bc [size=4]
Region 2: I/O ports at 30a0 [size=8]
Region 3: I/O ports at 30b8 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at d073c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller
[8086:9c22] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d0738000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ef80 [size=32]
02:00.0 Network controller [0280]: Intel Corporation Wireless 7260
[8086:08b1] (rev 73)
Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 66
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227
PCI Express Card Reader [10ec:5227] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:198f]
Physical Slot: 5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 60
Region 0: Memory at d0400000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
** USB devices:
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0424:5534 Standard Microsystems Corp.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 05c8:0369 Cheng Uei Precision Industry Co., Ltd
(Foxlink)
Bus 002 Device 003: ID 138a:003f Validity Sensors, Inc.
Bus 002 Device 005: ID 8087:07dc Intel Corp.
Bus 002 Device 002: ID 0424:2134 Standard Microsystems Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.utf8, LC_CTYPE=en_CA.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.54
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-18
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64:
false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64:
true
