As promised, here are the full logs for a resume attempt ending with reboot.
microcom -p /dev/ttyUSB0 connected to /dev/ttyUSB0 Escape character: Ctrl-\ Type the escape character followed by c to get to the menu or q to quit [ 0.000000] CPU0 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/vg0-debian ro splash init=/bin/systemd console=ttyS0,115200n8 no_console_suspend [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000deb8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000deb90000-0x00000000df13ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df140000-0x00000000df384fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df385000-0x00000000df392fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df393000-0x00000000df3bffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df3c0000-0x00000000df3c4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000df3c5000-0x00000000df407fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000df408000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcd90-0x000fcd9f] mapped at [ffff8800000fcd90] [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff] [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff] [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdeb8ffff] [ 0.000000] init_memory_mapping: [mem 0xdf408000-0xdf7fffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] RAMDISK: [mem 0x35a2a000-0x36d0cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DF385070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DF390C00 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DF385168 00BA92 (v02 ALASKA A M I 00000015 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DF3BEF80 000040 [ 0.000000] ACPI: APIC 0x00000000DF390CF8 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DF390D90 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DF390DD0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DF390E08 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DF391178 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DF391B28 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff] [ 0.000000] NODE_DATA [mem 0x21eff4000-0x21eff8fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00090fff] [ 0.000000] node 0: [mem 0x00100000-0xdeb8ffff] [ 0.000000] node 0: [mem 0xdf408000-0xdf7fffff] [ 0.000000] node 0: [mem 0x100000000-0x21effffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdeb90000-0xdf13ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf140000-0xdf384fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf385000-0xdf392fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf393000-0xdf3bffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf3c0000-0xdf3c4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf3c5000-0xdf407fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s85824 r8192 d20672 u262144 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060148 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/vg0-debian ro splash init=/bin/systemd console=ttyS0,115200n8 no_console_suspend [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 8140272K/8354912K available (5191K kernel code, 942K rwdata, 1824K rodata, 1200K init, 840K bss, 214640K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3500.055 MHz processor [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.11 BogoMIPS (lpj=14000220) [ 0.000551] pid_max: default: 32768 minimum: 301 [ 0.000790] ACPI: Core revision 20140424 [ 0.006551] ACPI: All ACPI Tables successfully acquired [ 0.234754] Security Framework initialized [ 0.234963] AppArmor: AppArmor disabled by boot time parameter [ 0.235249] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.235920] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.237412] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.238237] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.238578] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.239098] Initializing cgroup subsys memory [ 0.239317] Initializing cgroup subsys devices [ 0.239541] Initializing cgroup subsys freezer [ 0.239761] Initializing cgroup subsys net_cls [ 0.239983] Initializing cgroup subsys blkio [ 0.240197] Initializing cgroup subsys perf_event [ 0.240429] Initializing cgroup subsys net_prio [ 0.240670] CPU: Physical Processor ID: 0 [ 0.240869] CPU: Processor Core ID: 0 [ 0.241066] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.241066] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.241696] mce: CPU supports 9 MCE banks [ 0.241904] CPU0: Thermal monitoring enabled (TM1) [ 0.242146] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.242146] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.242146] tlb_flushall_shift: 6 [ 0.242943] Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000) [ 0.244222] ftrace: allocating 21551 entries in 85 pages [ 0.251640] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.291676] smpboot: CPU0: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz (fam: 06, model: 2a, stepping: 07) [ 0.292174] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.292736] ... version: 3 [ 0.292935] ... bit width: 48 [ 0.293138] ... generic registers: 4 [ 0.293337] ... value mask: 0000ffffffffffff [ 0.293598] ... max period: 0000ffffffffffff [ 0.293858] ... fixed-purpose events: 3 [ 0.294057] ... event mask: 000000070000000f [ 0.295334] x86: Booting SMP configuration: [ 0.295543] .... node #0, CPUs: #1 [ 0.306356] CPU1 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.308956] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.309418] #2 [ 0.320035] CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.322735] #3 [ 0.333339] CPU3 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.336054] #4 #5 #6 #7 [ 0.389099] x86: Booted up 1 node, 8 CPUs [ 0.389318] smpboot: Total of 8 processors activated (56000.88 BogoMIPS) [ 0.395562] devtmpfs: initialized [ 0.397838] PM: Registering ACPI NVS region [mem 0xdf140000-0xdf384fff] (2379776 bytes) [ 0.398261] PM: Registering ACPI NVS region [mem 0xdf393000-0xdf3bffff] (184320 bytes) [ 0.398648] PM: Registering ACPI NVS region [mem 0xdf3c5000-0xdf407fff] (274432 bytes) [ 0.399693] pinctrl core: initialized pinctrl subsystem [ 0.400008] NET: Registered protocol family 16 [ 0.400321] cpuidle: using governor ladder [ 0.400525] cpuidle: using governor menu [ 0.400751] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.401121] ACPI: bus type PCI registered [ 0.401320] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.401700] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.402153] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.402540] PCI: Using configuration type 1 for base access [ 0.415735] ACPI: Added _OSI(Module Device) [ 0.415943] ACPI: Added _OSI(Processor Device) [ 0.416163] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.416396] ACPI: Added _OSI(Processor Aggregator Device) [ 0.418487] ACPI: Executed 1 blocks of module-level executable AML code [ 0.429386] ACPI: Dynamic OEM Table Load: [ 0.429607] ACPI: SSDT 0xFFFF880215FC2000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.440299] ACPI: Dynamic OEM Table Load: [ 0.440518] ACPI: SSDT 0xFFFF880215AD8C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.453198] ACPI: Dynamic OEM Table Load: [ 0.453417] ACPI: SSDT 0xFFFF880215ABDE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.465018] ACPI: Interpreter enabled [ 0.465210] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.465682] ACPI: (supports S0 S1 S3 S4 S5) [ 0.465890] ACPI: Using IOAPIC for interrupt routing [ 0.466153] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.471347] ACPI: Power Resource [FN00] (off) [ 0.471623] ACPI: Power Resource [FN01] (off) [ 0.471895] ACPI: Power Resource [FN02] (off) [ 0.472169] ACPI: Power Resource [FN03] (off) [ 0.472441] ACPI: Power Resource [FN04] (off) [ 0.473097] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.473404] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.473852] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.474666] PCI host bridge to bus 0000:00 [ 0.474871] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.475141] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.475443] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.475747] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.476083] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.476418] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.476754] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.477090] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.477556] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.478177] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.478638] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.479070] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.479495] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.479920] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.480345] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.480768] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.481192] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.489496] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.489801] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.490350] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.497511] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.498075] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.505524] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.506078] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.513537] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.513976] pci 0000:06:00.0: System wakeup disabled by ACPI [ 0.514279] pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode) [ 0.514915] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode) [ 0.515643] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.516107] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.516570] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.517032] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.517493] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.517959] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.518490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.518951] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.519553] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.519821] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.520232] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.520510] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.520904] vgaarb: loaded [ 0.521041] vgaarb: bridge control possible 0000:01:00.0 [ 0.521338] PCI: Using ACPI for IRQ routing [ 0.523016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.523396] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.526709] Switched to clocksource hpet [ 0.530381] pnp: PnP ACPI init [ 0.530547] ACPI: bus type PNP registered [ 0.530807] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.531188] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.531479] system 00:01: [io 0x0200-0x020f] has been reserved [ 0.531770] system 00:01: [io 0xffff] has been reserved [ 0.532032] system 00:01: [io 0xffff] has been reserved [ 0.532294] system 00:01: [io 0x0400-0x0453] could not be reserved [ 0.532601] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.532891] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.533182] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.533529] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.533880] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.534209] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.534680] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.535010] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.535334] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.535658] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.535982] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.536305] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.536629] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.536952] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.537276] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.537601] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.537940] system 00:06: [mem 0xe0000000-0xe0000fff] has been reserved [ 0.538346] pnp: PnP ACPI: found 7 devices [ 0.538549] ACPI: bus type PNP unregistered [ 0.544898] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff] [ 0.545236] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.545618] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.545921] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.546166] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.546466] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.546802] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.547181] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.547427] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.547729] pci 0000:00:1c.0: bridge window [mem 0xe0100000-0xe02fffff] [ 0.548062] pci 0000:00:1c.0: bridge window [mem 0xe0300000-0xe04fffff 64bit pref] [ 0.548442] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.548690] pci 0000:00:1c.1: bridge window [mem 0xf7300000-0xf73fffff] [ 0.549028] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7200000-0xf720ffff pref] [ 0.549381] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.549627] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.549928] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff] [ 0.550264] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.550512] pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff] [ 0.550853] pci 0000:06:00.0: PCI bridge to [bus 07] [ 0.551100] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff] [ 0.551416] pci 0000:00:1c.6: PCI bridge to [bus 06-07] [ 0.551674] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] [ 0.552095] NET: Registered protocol family 2 [ 0.552530] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.552988] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.553425] TCP: Hash tables configured (established 65536 bind 65536) [ 0.553754] TCP: reno registered [ 0.553923] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.554244] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.554643] NET: Registered protocol family 1 [ 0.595152] Unpacking initramfs... [ 0.827934] Freeing initrd memory: 19340K (ffff880035a2a000 - ffff880036d0d000) [ 0.828315] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.828631] software IO TLB [mem 0xdab90000-0xdeb90000] (64MB) mapped at [ffff8800dab90000-ffff8800deb8ffff] [ 0.829419] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.829965] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29 [ 0.830255] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29 [ 0.830545] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29 [ 0.830836] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29 [ 0.831126] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x29 [ 0.831422] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x29 [ 0.831714] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x29 [ 0.832004] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x29 [ 0.832332] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 0.833007] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.833352] audit: initializing netlink subsys (disabled) [ 0.833630] audit: type=2000 audit(1417241306.596:1): initialized [ 0.834214] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.834539] zbud: loaded [ 0.834850] VFS: Disk quotas dquot_6.5.2 [ 0.835064] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.835466] msgmni has been set to 15936 [ 0.835926] alg: No test for stdrng (krng) [ 0.836154] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.836570] io scheduler noop registered [ 0.836767] io scheduler deadline registered [ 0.837017] io scheduler cfq registered (default) [ 0.837692] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.837977] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.838561] GHES: HEST is not enabled! [ 0.838800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.839559] console [ttyS0] disabled [ 0.860350] 0000:07:01.0: ttyS0 at I/O 0xc000 (irq = 19, base_baud = 921600) is a 16550A [ 2.959591] tsc: Refined TSC clocksource calibration: 3500.024 MHz [ 2.959598] console [ttyS0] enabled [ 2.959890] Linux agpgart interface v0.103 [ 2.960081] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.963034] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.963037] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.963133] mousedev: PS/2 mouse device common for all mice [ 2.963167] rtc_cmos 00:02: RTC can wake from S4 [ 2.963420] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.963467] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.963477] Intel P-state driver initializing. [ 2.963484] Intel pstate controlling: cpu 0 [ 3.022738] Intel pstate controlling: cpu 1 [ 3.026935] Intel pstate controlling: cpu 2 [ 3.031160] Intel pstate controlling: cpu 3 [ 3.035359] Intel pstate controlling: cpu 4 [ 3.039556] Intel pstate controlling: cpu 5 [ 3.043756] Intel pstate controlling: cpu 6 [ 3.047979] Intel pstate controlling: cpu 7 [ 3.052190] ledtrig-cpu: registered to indicate activity on CPUs [ 3.058493] AMD IOMMUv2 driver by Joerg Roedel <joerg.roe...@amd.com> [ 3.064940] AMD IOMMUv2 functionality not available on this system [ 3.071177] TCP: cubic registered [ 3.074691] NET: Registered protocol family 10 [ 3.079318] mip6: Mobile IPv6 [ 3.082286] NET: Registered protocol family 17 [ 3.086739] mpls_gso: MPLS GSO support [ 3.090723] registered taskstats version 1 [ 3.095237] rtc_cmos 00:02: setting system clock to 2014-11-29 06:08:29 UTC (1417241309) [ 3.103903] Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000) [ 3.111742] Write protecting the kernel read-only data: 8192k [ 3.118806] Freeing unused kernel memory: 940K (ffff880001515000 - ffff880001600000) [ 3.126930] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000) Loading, please wait... [ 3.160294] systemd-udevd[96]: starting version 215 [ 3.165389] random: systemd-udevd urandom read with 2 bits of entropy available [ 3.174192] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.182607] ACPI: Power Button [PWRB] [ 3.186397] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.186474] ACPI: Fan [FAN0] (off) [ 3.186495] ACPI: Fan [FAN1] (off) [ 3.186512] ACPI: Fan [FAN2] (off) [ 3.186527] ACPI: Fan [FAN3] (off) [ 3.186543] ACPI: Fan [FAN4] (off) [ 3.210831] ACPI: Power Button [PWRF] [ 3.214691] wmi: Mapper loaded [ 3.219436] pps_core: LinuxPPS API ver. 1 registered [ 3.219454] [drm] Initialized drm 1.1.0 20060810 [ 3.229036] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 3.238777] AVX version of gcm_enc/dec engaged. [ 3.243395] PTP clock support registered [ 3.244874] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 3.253908] ACPI: bus type USB registered [ 3.253971] SCSI subsystem initialized [ 3.259096] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.259096] ACPI: Thermal Zone [TZ00] (28 C) [ 3.259254] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.259254] ACPI: Thermal Zone [TZ01] (30 C) [ 3.281566] usbcore: registered new interface driver usbfs [ 3.287077] usbcore: registered new interface driver hub [ 3.292454] usbcore: registered new device driver usb [ 3.297955] alg: No test for crc32 (crc32-pclmul) [ 3.302765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.309717] ehci-pci: EHCI PCI platform driver [ 3.314298] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.319548] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.326974] ehci-pci 0000:00:1a.0: debug port 2 [ 3.331714] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 3.335448] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7428000 [ 3.342892] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.342950] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.342951] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.342954] usb usb1: Product: EHCI Host Controller [ 3.342954] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd [ 3.342956] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.343146] hub 1-0:1.0: USB hub found [ 3.343153] hub 1-0:1.0: 2 ports detected [ 3.343465] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.343469] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.343489] ehci-pci 0000:00:1d.0: debug port 2 [ 3.347419] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7427000 [ 3.354906] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.354953] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.354954] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.354956] usb usb2: Product: EHCI Host Controller [ 3.354957] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd [ 3.354957] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.355123] hub 2-0:1.0: USB hub found [ 3.355127] hub 2-0:1.0: 2 ports detected [ 3.452286] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 3.458380] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.458430] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 3.458434] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 3.483305] MXM: GUID detected in BIOS [ 3.487350] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4000a2 [ 3.493458] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4) [ 3.499745] nouveau [ DEVICE][0000:01:00.0] Family : NVE0 [ 3.505361] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 3.512265] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 3.518722] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 3.520001] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.520002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.520003] usb usb3: Product: xHCI Host Controller [ 3.520003] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd [ 3.520004] usb usb3: SerialNumber: 0000:03:00.0 [ 3.520148] hub 3-0:1.0: USB hub found [ 3.520160] hub 3-0:1.0: 2 ports detected [ 3.520243] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 3.520244] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 3.520273] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.520273] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.520274] usb usb4: Product: xHCI Host Controller [ 3.520274] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd [ 3.520275] usb usb4: SerialNumber: 0000:03:00.0 [ 3.520401] hub 4-0:1.0: USB hub found [ 3.520413] hub 4-0:1.0: 2 ports detected [ 3.520544] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 3.520547] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5 [ 3.582069] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.582069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.582070] usb usb5: Product: xHCI Host Controller [ 3.582070] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd [ 3.582071] usb usb5: SerialNumber: 0000:05:00.0 [ 3.582198] hub 5-0:1.0: USB hub found [ 3.582207] hub 5-0:1.0: 2 ports detected [ 3.582271] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 3.582272] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6 [ 3.582304] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.582305] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.582306] usb usb6: Product: xHCI Host Controller [ 3.582306] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd [ 3.582307] usb usb6: SerialNumber: 0000:05:00.0 [ 3.582415] hub 6-0:1.0: USB hub found [ 3.582425] hub 6-0:1.0: 2 ports detected [ 3.663357] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.750637] e1000e 0000:00:19.0 eth0: registered PHC clock [ 3.756146] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:bf:a2:9f [ 3.764088] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.764296] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 3.764297] nouveau [ VBIOS][0000:01:00.0] using image from PROM [ 3.764359] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 3.764360] nouveau [ VBIOS][0000:01:00.0] version 80.04.47.00.0d [ 3.764634] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled [ 3.764706] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5 [ 3.764706] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB [ 3.764707] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 3.766740] nouveau [ VOLT][0000:01:00.0] GPU voltage: 987500uv [ 3.795263] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM [ 3.795274] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 3.795300] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 3.795347] nouveau [ CLK][0000:01:00.0] 07: core 324 MHz memory 648 MHz [ 3.795364] nouveau [ CLK][0000:01:00.0] 0a: core 324-862 MHz memory 1620 MHz [ 3.795411] nouveau [ CLK][0000:01:00.0] 0d: core 540-1346 MHz memory 6008 MHz [ 3.795467] nouveau [ CLK][0000:01:00.0] 0f: core 540-1346 MHz memory 6008 MHz [ 3.795691] nouveau [ CLK][0000:01:00.0] --: core 324 MHz memory 648 MHz [ 3.795955] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.795956] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.796230] hub 1-1:1.0: USB hub found [ 3.796316] hub 1-1:1.0: 6 ports detected [ 3.815931] [TTM] Zone kernel: Available graphics memory: 4080998 kiB [ 3.815931] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.815931] [TTM] Initializing pool allocator [ 3.815934] [TTM] Initializing DMA pool allocator [ 3.815941] nouveau [ DRM] VRAM: 2048 MiB [ 3.815942] nouveau [ DRM] GART: 1048576 MiB [ 3.815943] nouveau [ DRM] TMDS table version 2.0 [ 3.815943] nouveau [ DRM] DCB version 4.0 [ 3.815944] nouveau [ DRM] DCB outp 00: 01000f02 00020030 [ 3.815945] nouveau [ DRM] DCB outp 01: 02000f00 00000000 [ 3.815945] nouveau [ DRM] DCB outp 02: 08011f82 00020030 [ 3.815946] nouveau [ DRM] DCB outp 03: 02022f62 00020010 [ 3.815946] nouveau [ DRM] DCB outp 04: 04833fb6 0f420010 [ 3.815947] nouveau [ DRM] DCB outp 05: 04033f72 00020010 [ 3.815948] nouveau [ DRM] DCB conn 00: 00001030 [ 3.815948] nouveau [ DRM] DCB conn 01: 00020131 [ 3.815949] nouveau [ DRM] DCB conn 02: 00010261 [ 3.815949] nouveau [ DRM] DCB conn 03: 00002346 [ 3.817385] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.817385] [drm] Driver supports precise vblank timestamp query. [ 3.821544] nouveau [ DRM] MM: using COPY for buffer copies [ 3.911770] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.025917] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 4.033188] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode [ 4.041392] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 4.048940] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 4.055667] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.063240] hub 2-1:1.0: USB hub found [ 4.067093] hub 2-1:1.0: 8 ports detected [ 4.084810] scsi0 : ahci [ 4.087637] scsi1 : ahci [ 4.090408] scsi2 : ahci [ 4.093170] scsi3 : ahci [ 4.095926] scsi4 : ahci [ 4.098478] Switched to clocksource tsc [ 4.098590] scsi5 : ahci [ 4.098627] ata1: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426100 irq 59 [ 4.098631] ata2: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426180 irq 59 [ 4.098632] ata3: DUMMY [ 4.098636] ata4: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426280 irq 59 [ 4.098640] ata5: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426300 irq 59 [ 4.098644] ata6: SATA max UDMA/133 abar m2048@0xf7426000 port 0xf7426380 irq 59 [ 4.098873] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 4.098874] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 4.099081] scsi6 : ahci [ 4.099133] scsi7 : ahci [ 4.099171] ata7: SATA max UDMA/133 abar m512@0xf7210000 port 0xf7210100 irq 19 [ 4.099175] ata8: SATA max UDMA/133 abar m512@0xf7210000 port 0xf7210180 irq 19 [ 4.100409] nouveau [ DRM] allocated 2048x1152 fb: 0x80000, bo ffff880036aa2c00 [ 4.144169] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 4.193709] fbcon: nouveaufb (fb0) is primary device [ 4.238712] usb 1-1.1: New USB device found, idVendor=058f, idProduct=6364 [ 4.238713] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.238713] usb 1-1.1: Product: Mass Storage Device [ 4.238714] usb 1-1.1: Manufacturer: Generic [ 4.238714] usb 1-1.1: SerialNumber: 058F63646476 [ 4.239613] hidraw: raw HID events driver (C) Jiri Kosina [ 4.239952] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 4.240189] scsi8 : usb-storage 1-1.1:1.0 [ 4.240257] usbcore: registered new interface driver usb-storage [ 4.241109] usbcore: registered new interface driver usbhid [ 4.241109] usbhid: USB HID core driver [ 4.241484] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.1/input1 [ 4.344465] usb 2-1.3: new low-speed USB device number 3 using ehci-pci [ 4.416458] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.416468] ata8: SATA link down (SStatus 0 SControl 300) [ 4.416503] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.416511] ata7: SATA link down (SStatus 0 SControl 300) [ 4.416533] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.416555] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.416579] ata2: SATA link down (SStatus 0 SControl 300) [ 4.416844] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.416846] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021e057bf8), AE_NOT_FOUND (20140424/psparse-536) [ 4.417221] ata1.00: ATA-8: ST1000DM003-1CH162, CC43, max UDMA/133 [ 4.417221] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.417262] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.417264] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021e057a18), AE_NOT_FOUND (20140424/psparse-536) [ 4.417491] ata5.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133 [ 4.417492] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.417590] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.417592] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021e057bf8), AE_NOT_FOUND (20140424/psparse-536) [ 4.417846] ata1.00: configured for UDMA/133 [ 4.417961] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC43 PQ: 0 ANSI: 5 [ 4.418290] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.418292] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021e057a18), AE_NOT_FOUND (20140424/psparse-536) [ 4.418452] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.418454] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021e06e9a0), AE_NOT_FOUND (20140424/psparse-536) [ 4.418457] ata6.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100 [ 4.418482] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.418485] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021e057a90), AE_NOT_FOUND (20140424/psparse-536) [ 4.418528] ata5.00: configured for UDMA/133 [ 4.418774] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.418774] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.418811] sd 0:0:0:0: [sda] Write Protect is off [ 4.418824] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.419261] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.419263] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88021e06e9a0), AE_NOT_FOUND (20140424/psparse-536) [ 4.419265] ata6.00: configured for UDMA/100 [ 4.420707] ata4.00: ATA-8: OCZ-VERTEX2 3.5, 1.33, max UDMA/133 [ 4.420707] ata4.00: 224674128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.428490] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359) [ 4.428492] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021e057a90), AE_NOT_FOUND (20140424/psparse-536) [ 4.430722] ata4.00: configured for UDMA/133 [ 4.430755] scsi 3:0:0:0: Direct-Access ATA OCZ-VERTEX2 3.5 1.33 PQ: 0 ANSI: 5 [ 4.430831] sd 3:0:0:0: [sdb] 224674128 512-byte logical blocks: (115 GB/107 GiB) [ 4.430877] sd 3:0:0:0: [sdb] Write Protect is off [ 4.430890] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.430891] scsi 4:0:0:0: Direct-Access ATA WDC WD5001AALS-0 3B01 PQ: 0 ANSI: 5 [ 4.430986] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.431013] sd 4:0:0:0: [sdc] Write Protect is off [ 4.431027] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.431136] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.431166] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 4.431191] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.431720] sdb: [ 4.431819] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.432258] Console: switching to colour frame buffer device 256x72 [ 4.433087] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5 [ 4.434777] sdc: sdc1 sdc2 sdc3 [ 4.434895] sd 4:0:0:0: [sdc] Attached SCSI disk [ 4.438912] sda: sda1 sda2 sda3 [ 4.439340] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.442377] usb 2-1.3: New USB device found, idVendor=413c, idProduct=2107 [ 4.442378] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.442379] usb 2-1.3: Product: Dell USB Entry Keyboard [ 4.442379] usb 2-1.3: Manufacturer: DELL [ 4.445347] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:413C:2107.0002/input/input4 [ 4.445373] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.3/input0 [ 4.446354] scsi 5:0:0:0: Attached scsi generic sg3 type 5 [ 4.516714] usb 2-1.4: new high-speed USB device number 4 using ehci-pci [ 4.544596] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.544596] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.613133] usb 2-1.4: New USB device found, idVendor=0424, idProduct=2512 [ 4.613134] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.613380] hub 2-1.4:1.0: USB hub found [ 4.613479] hub 2-1.4:1.0: 2 ports detected [ 4.885301] usb 2-1.4.1: new high-speed USB device number 5 using ehci-pci [ 4.983445] usb 2-1.4.1: New USB device found, idVendor=05a9, idProduct=2649 [ 4.983446] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.983447] usb 2-1.4.1: Product: Monitor Webcam [ 4.983447] usb 2-1.4.1: Manufacturer: OmniVision Technologies, Inc.538-2640-08.09.09.1 [ 5.061549] usb 2-1.4.2: new high-speed USB device number 6 using ehci-pci [ 5.075561] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 5.081922] nouveau 0000:01:00.0: registered panic notifier [ 5.117493] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root fil[ 5.138382] device-mapper: uevent: version 1.0.3 e system ... Beg[ 5.144475] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-de...@redhat.com [ 5.153898] usb 2-1.4.2: New USB device found, idVendor=0424, idProduct=2514 in: Running /scr[ 5.153899] usb 2-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.154052] hub 2-1.4.2:1.0: USB hub found [ 5.154146] hub 2-1.4.2:1.0: 4 ports detected ipts/local-top ... [ 5.242534] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 5.251287] scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 5.260040] scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 5.268917] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS [ 5.277708] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 5.279263] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 5.288648] sd 8:0:0:1: Attached scsi generic sg5 type 0 [ 5.290224] sd 8:0:0:1: [sde] Attached SCSI removable disk [ 5.299569] sd 8:0:0:2: Attached scsi generic sg6 type 0 [ 5.301121] sd 8:0:0:2: [sdf] Attached SCSI removable disk [ 5.310539] sd 8:0:0:3: Attached scsi generic sg7 type 0 [ 5.312133] sd 8:0:0:3: [sdg] Attached SCSI removable disk [ 5.354706] random: nonblocking pool is initialized One or more specified logical volume(s) not found. Unable to find LVM volume vg0/swap_crypt Reading all physical volumes. This may take a while... Found volume group "vg0" using metadata type lvm2 5 logical volume(s) in volume group "vg0" now active [ 5.434058] usb 2-1.4.2.1: new full-speed USB device number 7 using ehci-pci [ 5.549238] usb 2-1.4.2.1: New USB device found, idVendor=05f3, idProduct=0081 [ 5.556476] usb 2-1.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.564146] usb 2-1.4.2.1: Product: Kinesis Keyboard Hub [ 5.569464] usb 2-1.4.2.1: Manufacturer: PI Engineering [ 5.575122] hub 2-1.4.2.1:1.0: USB hub found [ 5.579649] hub 2-1.4.2.1:1.0: 4 ports detected Please unlock disk /dev/mapper/vg0-swap (vg0-swa[ 5.658440] usb 2-1.4.2.2: new low-speed USB device number 8 using ehci-pci p_crypt):[ 5.781247] usb 2-1.4.2.2: New USB device found, idVendor=1a7c, idProduct=0068 [ 5.788494] usb 2-1.4.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.796162] usb 2-1.4.2.2: Product: Evoluent VerticalMouse 3 [ 5.801954] usb 2-1.4.2.2: Manufacturer: Kingsis Peripherals [ 5.812592] input: Kingsis Peripherals Evoluent VerticalMouse 3 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2.2/2-1.4.2.2:1.0/0003:1A7C:0068.0003/input/input5 [ 5.829024] hid-generic 0003:1A7C:0068.0003: input,hidraw2: USB HID v1.10 Mouse [Kingsis Peripherals Evoluent VerticalMouse 3 ] on usb-0000:00:1d.0-1.4.2.2/input0 [ 5.915060] usb 2-1.4.2.1.2: new full-speed USB device number 9 using ehci-pci [ 6.022628] usb 2-1.4.2.1.2: New USB device found, idVendor=05f3, idProduct=0007 [ 6.030043] usb 2-1.4.2.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.042309] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2.1/2-1.4.2.1.2/2-1.4.2.1.2:1.0/0003:05F3:0007.0004/input/input6 [ 6.057017] hid-generic 0003:05F3:0007.0004: input,hidraw3: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:1d.0-1.4.2.1.2/input0 [ 6.074015] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2.1/2-1.4.2.1.2/2-1.4.2.1.2:1.1/0003:05F3:0007.0005/input/input7 [ 6.088723] hid-generic 0003:05F3:0007.0005: input,hidraw4: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1d.0-1.4.2.1.2/input1 [2K Please unlock disk /dev/mapper/vg0-swap (vg0-swap_crypt):*[2K Please unlock disk /dev/mapper/vg0-swap (vg0-swap_crypt):**[2K Please unlock disk /dev/mapper/vg0-swap (vg0-swap_crypt):***[2K Please unlock disk /dev/mapper/vg0-swap (vg0-swap_crypt):****[2K Please unlock disk /dev/mapper/vg0-swap (vg0-swap_crypt):*****[2K Please unlock disk /dev/mapper/vg0-swap (vg0-swap_crypt):******[2K Please unlock disk /dev/mapper/vg0-swap (vg0-swap_crypt):******* [ 15.098558] NET: Registered protocol family 38 [ 15.239740] sha256_ssse3: Using AVX optimized SHA-256 implementation cryptsetup: vg0-swap_crypt set up successfully done. Begin: Running /scripts/local-premount ... [ 15.416596] raid6: sse2x1 4824 MB/s [ 15.484701] raid6: sse2x2 7532 MB/s [ 15.552797] raid6: sse2x4 10434 MB/s [ 15.556548] raid6: using algorithm sse2x4 (10434 MB/s) [ 15.561691] raid6: using ssse3x2 recovery algorithm [ 15.566966] xor: automatically using best checksumming function: [ 15.612881] avx : 26163.000 MB/sec [ 15.619520] Btrfs loaded Scanning for Btrfs filesystems [ 15.913020] BTRFS: device label debian devid 1 transid 188513 /dev/mapper/vg0-debian [ 15.922753] PM: Starting manual resume from disk [ 15.929923] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.909260] PM: Using 3 thread(s) for decompression. [ 18.909260] PM: Loading and decompressing image data (675234 pages)... [ 19.115970] PM: Image loading progress: 0% [ 20.194578] PM: Image loading progress: 10% [ 20.945883] PM: Image loading progress: 20% [ 21.771872] PM: Image loading progress: 30% [ 22.517143] PM: Image loading progress: 40% [ 23.140849] PM: Image loading progress: 50% [ 23.946874] PM: Image loading progress: 60% [ 24.791268] PM: Image loading progress: 70% [ 25.512121] PM: Image loading progress: 80% [ 26.265635] PM: Image loading progress: 90% [ 26.796579] PM: Image loading progress: 100% [ 26.801137] PM: Image loading done. [ 26.804646] PM: Read 2700936 kbytes in 7.86 seconds (343.63 MB/s) [ 26.812550] nouveau [ DRM] suspending display... [ 26.817625] nouveau [ DRM] unpinning framebuffer(s)... [ 26.823274] nouveau [ DRM] evicting buffers... [ 26.828993] nouveau [ DRM] waiting for kernel channels to go idle... [ 26.835811] nouveau [ DRM] suspending client object trees... [ 26.848617] nouveau [ DRM] suspending kernel object tree... [ 28.196524] PM: quiesce of devices complete after 1382.350 msecs [ 28.202862] PM: late quiesce of devices complete after 0.314 msecs [ 28.209960] PM: noirq quiesce of devices complete after 0.909 msecs [ 28.216231] Disabling non-boot CPUs ... [ 28.255475] intel_pstate CPU 1 exiting [ 28.391674] smpboot: CPU 1 is now offline [ 28.399716] usb 1-1-port1: cannot reset (err = -113) [ 28.404688] usb 1-1-port1: cannot reset (err = -113) [ 28.409657] usb 1-1-port1: cannot reset (err = -113) [ 28.414624] usb 1-1-port1: cannot reset (err = -113) [ 28.419592] usb 1-1-port1: cannot reset (err = -113) [ 28.424561] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad? [ 28.431006] usb 1-1-port1: cannot disable (err = -113) [ 28.436147] usb 1-1-port1: cannot reset (err = -113) [ 28.441117] usb 1-1-port1: cannot reset (err = -113) [ 28.446083] usb 1-1-port1: cannot reset (err = -113) [ 28.451050] usb 1-1-port1: cannot reset (err = -113) [ 28.456020] usb 1-1-port1: cannot reset (err = -113) [ 28.460988] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad? [ 28.467432] usb 1-1-port1: cannot disable (err = -113) [ 28.472576] usb 1-1-port1: cannot reset (err = -113) [ 28.477542] usb 1-1-port1: cannot reset (err = -113) [ 28.482513] usb 1-1-port1: cannot reset (err = -113) [ 28.487480] usb 1-1-port1: cannot reset (err = -113) [ 28.492448] usb 1-1-port1: cannot reset (err = -113) [ 28.497414] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad? [ 28.503861] usb 1-1-port1: cannot disable (err = -113) [ 28.509002] usb 1-1-port1: cannot reset (err = -113) [ 28.513971] usb 1-1-port1: cannot reset (err = -113) [ 28.518940] usb 1-1-port1: cannot reset (err = -113) [ 28.523909] usb 1-1-port1: cannot reset (err = -113) [ 28.528875] usb 1-1-port1: cannot reset (err = -113) [ 28.533841] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad? [ 28.540286] usb 1-1-port1: cannot disable (err = -113) [ 28.545428] usb 1-1-port1: cannot disable (err = -113) [ 28.571934] intel_pstate CPU 2 exiting [ 28.712141] smpboot: CPU 2 is now offline [ 28.748195] intel_pstate CPU 3 exiting [ 28.888399] smpboot: CPU 3 is now offline [ 29.068665] intel_pstate CPU 4 exiting [ 29.204863] smpboot: CPU 4 is now offline [ 29.244922] intel_pstate CPU 5 exiting [ 29.276969] NOHZ: local_softirq_pending 10 [ 29.281072] NOHZ: local_softirq_pending 10 [ 29.286295] smpboot: CPU 5 is now offline [ 29.361091] intel_pstate CPU 6 exiting [ 29.493284] smpboot: CPU 6 is now offline [ 29.513314] intel_pstate CPU 7 exiting [ 29.633488] smpboot: CPU 7 is now offline Enter command. Try 'help' for a list of builtin commands -> exit
