Subject: linux-image-3.16.0-4-amd64: poor performance with free b43 module Package: src:linux Version: 3.16.7-2 Severity: important X-debbugs-cc: gael.marl...@vivaldi.net, k...@debian.org
Hi, using the b43 module with this wireless NIC, I'm only getting rate-limiting to 100KB/s, sometimes 500KB/s; while switching to broadcom-sta-dkms (plus the modprobe -r/modprobe dance) leads to >3MB/s. http://wireless.kernel.org/en/users/Drivers/b43 seems to list this device as not supported but since it seems to bind the device anyway, I thought reporting a bug would be a good idea. Cheers, -- gael, with some help from KiBi. -- Package-specific info: ** Version: Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06) ** Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=49d40362-89c6-49c3-9c68-a8d78eb360d4 ro quiet ** Not tainted ** Kernel log: [ 6.254104] Bluetooth: SCO socket layer initialized [ 6.278606] ACPI: Battery Slot [BAT0] (battery present) [ 6.280522] ACPI: AC Adapter [ADP1] (off-line) [ 6.321282] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 6.416465] usbcore: registered new interface driver btusb [ 6.471623] bluetooth hci0: firmware: failed to load brcm/BCM20702A0-0a5c-21e3.hcd (-2) [ 6.471624] bluetooth hci0: Direct firmware load failed with error -2 [ 6.471625] bluetooth hci0: Falling back to user helper [ 6.493511] iTCO_vendor_support: vendor-support=0 [ 6.494238] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.494267] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 6.494346] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.773356] AVX version of gcm_enc/dec engaged. [ 6.777347] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 6.917882] alg: No test for crc32 (crc32-pclmul) [ 7.288548] [drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on [ 7.289133] Console: switching to colour frame buffer device 170x48 [ 7.295625] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 7.295627] i915 0000:00:02.0: registered panic notifier [ 7.330458] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 7.353321] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 7.384980] intel_rapl: RAPL domain dram detection failed [ 7.385258] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 7.425230] ACPI : EC: GPE storm detected(20 GPEs), transactions will use polling mode [ 7.446053] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x22c00, board id: 1910, fw id: 851366 [ 7.512494] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 7.665061] acpi device:2d: registered as cooling_device5 [ 7.665157] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input13 [ 7.845559] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 7.882005] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro [ 8.215898] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e3.hcd not found [ 8.238364] Adding 3998716k swap on /dev/sda7. Priority:-1 extents:1 across:3998716k FS [ 8.353441] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.617724] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 8.662229] acpi device:3a: registered as cooling_device6 [ 8.667139] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem [ 8.682354] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14 [ 8.682501] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.682553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.683565] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 8.683579] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.685095] EXT4-fs (sda5): mounted filesystem without journal. Opts: (null) [ 8.772005] systemd-journald[158]: Received request to flush runtime journal from PID 1 [ 8.988857] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08 [ 8.988896] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) [ 8.988925] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) [ 8.988977] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) [ 9.000776] bcma: bus0: Bus registered [ 9.067521] [drm] radeon kernel modesetting enabled. [ 9.067549] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 9.067654] [drm:radeon_pci_probe] *ERROR* radeon kernel modesetting for R600 or later requires firmware-linux-nonfree. [ 9.196157] r8169 0000:0b:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2) [ 9.196197] r8169 0000:0b:00.0: Direct firmware load failed with error -2 [ 9.196199] r8169 0000:0b:00.0: Falling back to user helper [ 9.196574] r8169 0000:0b:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-12) [ 9.208772] r8169 0000:0b:00.0 eth0: link down [ 9.208831] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.298322] cfg80211: Calling CRDA to update world regulatory domain [ 9.337483] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 [ 9.337557] b43: probe of bcma0:0 failed with error -524 [ 9.337584] Broadcom 43xx driver loaded [ Features: PMNLS ] [ 9.511675] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17 [ 9.640235] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.846462] cfg80211: World regulatory domain updated: [ 9.846472] cfg80211: DFS Master region: unset [ 9.846475] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9.846482] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9.846486] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9.846490] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 9.846494] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 9.846499] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 9.846503] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 9.846507] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 9.846511] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 36.687125] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx-0.fw [ 36.697992] brcmsmac bcma0:0: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw [ 36.817110] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 36.817216] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 36.818018] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.647435] wlan0: authenticate with 64:87:88:34:25:04 [ 37.650915] wlan0: direct probe to 64:87:88:34:25:04 (try 1/3) [ 37.851444] wlan0: direct probe to 64:87:88:34:25:04 (try 2/3) [ 38.055701] wlan0: send auth to 64:87:88:34:25:04 (try 3/3) [ 38.056984] wlan0: authenticated [ 38.059766] wlan0: associate with 64:87:88:34:25:04 (try 1/3) [ 38.061703] wlan0: RX AssocResp from 64:87:88:34:25:04 (capab=0x421 status=0 aid=1) [ 38.062284] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 38.062380] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 38.062483] wlan0: associated [ 38.062503] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 38.062653] cfg80211: Calling CRDA for country: FR [ 38.073593] cfg80211: Regulatory domain changed to country: FR [ 38.073600] cfg80211: DFS Master region: ETSI [ 38.073603] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 38.073608] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 38.073613] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 38.073617] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 38.073620] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) [ 38.073624] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 115.034200] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) ** Model information sys_vendor: Hewlett-Packard product_name: HP Pavilion dm4 Notebook PC product_version: 0694100011204010000623100 chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Hewlett-Packard bios_version: F.05 board_vendor: Hewlett-Packard board_name: 1794 board_version: 41.19 ** Loaded modules: arc4 brcmsmac cordic brcmutil b43 mac80211 cfg80211 ssb rng_core pcmcia pcmcia_core radeon bcma ttm rtsx_pci_ms memstick joydev x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp kvm_intel kvm crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw hp_wmi gf128mul sparse_keymap glue_helper iTCO_wdt iTCO_vendor_support ecb ablk_helper cryptd evdev psmouse i2c_i801 serio_raw pcspkr btusb bluetooth 6lowpan_iphc rfkill uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media ac battery wmi intel_smartconnect hp_accel lis3lv02d input_polldev shpchp i915 button video drm_kms_helper drm i2c_algo_bit i2c_core snd_hda_codec_hdmi processor snd_hda_codec_idt lpc_ich snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep mei_me mei snd_pcm snd_timer snd soundcore autofs4 ext4 crc16 mbcache jbd2 sg sr_mod cdrom sd_mod crc_t10dif crct10dif_generic rtsx_pci_sdmmc mmc_core crct10dif_pclmul crct10dif_common crc32c_intel r8169 mii ahci libahci libata scsi_mod xhci_hcd rtsx_pci mfd_core ehci_pci ehci_hcd usbcore usb_common thermal thermal_sys ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp #iface eth0 inet static # address 192.168.0.2 # netmask 255.255.255.0 # network 192.168.0.0 # broadcast 192.168.0.255 # gateway 192.168.0.1 # # dns-* options are implemented by the resolvconf package, if installed # dns-nameservers 192.168.0.1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 link/ether 10:1f:74:68:6c:3b brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether e4:d5:3d:93:d5:8d brd ff:ff:ff:ff:ff:ff inet 10.243.33.223/21 brd 10.243.39.255 scope global wlan0 valid_lft forever preferred_lft forever inet6 2001:450:1e:232:e6d5:3dff:fe93:d58d/64 scope global mngtmpaddr dynamic valid_lft 2591998sec preferred_lft 604798sec inet6 fe80::e6d5:3dff:fe93:d58d/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 2762063 2716 0 0 0 0 0 0 242917 1672 0 0 0 0 0 0 lo: 1595 17 0 0 0 0 0 0 1595 17 0 0 0 0 0 0 *** Protocol statistics: Ip: 705 total packets received 20 with invalid addresses 0 forwarded 45 with unknown protocol 0 incoming packets discarded 380 incoming packets delivered 52 requests sent out Icmp: 17 ICMP messages received 1 input ICMP message failed. ICMP input histogram: destination unreachable: 17 17 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 17 IcmpMsg: InType3: 17 OutType3: 17 Tcp: 10 active connections openings 0 passive connection openings 0 failed connection attempts 2 connection resets received 0 connections established 1816 segments received 1630 segments send out 4 segments retransmited 0 bad segments received. 5 resets sent Udp: 22 packets received 0 packets to unknown port received. 0 packet receive errors 35 packets sent UdpLite: TcpExt: 54 delayed acks sent Quick ack mode was activated 2 times 1081 packet headers predicted 50 acknowledgments not containing data payload received 4 predicted acknowledgments 1 times recovered from packet loss by selective acknowledgements TCPLostRetransmit: 1 3 fast retransmits 1 forward retransmits 2 DSACKs sent for old packets 2 connections reset due to early user close TCPSackShiftFallback: 13 TCPRcvCoalesce: 358 TCPOFOQueue: 465 TCPAutoCorking: 4 TCPOrigDataSent: 58 IpExt: InBcastPkts: 386 InOctets: 99182 OutOctets: 3800 InBcastOctets: 48793 InNoECTPkts: 705 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: c0800000-c17fffff Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1794] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 52 Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Region 0: Memory at c1804000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at c1809000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at c1800000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Memory behind bridge: c0700000-c07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 Memory behind bridge: c0600000-c06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Prefetchable memory behind bridge: 00000000c0400000-00000000c04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 Memory behind bridge: c0500000-c05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at c1808000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA Controller [RAID mode] [8086:282a] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 49 Region 0: I/O ports at 4088 [size=8] Region 1: I/O ports at 4094 [size=4] Region 2: I/O ports at 4080 [size=8] Region 3: I/O ports at 4090 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at c1807000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at c1805000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 4040 [size=32] 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1794] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 7 Region 0: Memory at a0000000 (64-bit, prefetchable) [disabled] [size=256M] Region 2: Memory at c0800000 (64-bit, non-prefetchable) [disabled] [size=128K] Region 4: I/O ports at 3000 [disabled] [size=256] Expansion ROM at c0820000 [disabled] [size=128K] Capabilities: <access denied> 09:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:1795] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at c0700000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: bcma-pci-bridge 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at c0600000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci 0b:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 0c:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:1793] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd ** USB devices: Bus 004 Device 003: ID 08ff:2665 AuthenTec, Inc. Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 064e:e258 Suyin Corp. HP TrueVision HD Integrated Webcam Bus 001 Device 003: ID 0a5c:21e3 Broadcom Corp. HP Portable Valentine Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.16.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 18-1 ii linux-base 3.5 Versions of packages linux-image-3.16.0-4-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 Versions of packages linux-image-3.16.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 0.43 pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: KiBi. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
