Package: installation-reports INSTALL REPORT
Debian-installer-version: 2005-02-02, sarge-i386-netinst.iso uname -a: Linux nakke 2.6.8-2-686 #1 Sat Jan 8 16:50:08 EST 2005 i686 GNU/Linux Date: 2005-02-05 Method: CD Machine: build Processor: pentium 4, 3.2 GHz Memory:512 MB Root Device: SATA, Maxtor 6B200M0 Root Size/partition table: /dev/sda2 / ext3 rw,errors=remount-ro 0 0 proc /proc proc rw 0 0 sysfs /sys sysfs rw 0 0 devpts /dev/pts devpts rw,gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs rw 0 0 /dev/sda1 /boot ext3 rw 0 0 /dev/sda7 /home ext3 rw 0 0 /dev/sda5 /tmp ext2 rw 0 0 /dev/sda3 /var ext3 rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 /dev /.dev unknown rw,bind 0 0 none /dev tmpfs rw,size=5M,mode=0755 0 0 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0326 (rev a1) 0000:02:07.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61) 0000:02:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 01) [EMAIL PROTECTED]:/proc/ide$ lspci -n 0000:00:00.0 0600: 8086:2570 (rev 02) 0000:00:01.0 0604: 8086:2571 (rev 02) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.3 0c03: 8086:24de (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.1 0101: 8086:24db (rev 02) 0000:00:1f.2 0101: 8086:24d1 (rev 02) 0000:00:1f.3 0c05: 8086:24d3 (rev 02) 0000:00:1f.5 0401: 8086:24d5 (rev 02) 0000:01:00.0 0300: 10de:0326 (rev a1) 0000:02:07.0 0c00: 11c1:5811 (rev 61) 0000:02:08.0 0200: 8086:1050 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O ] Configure network HW: [O ] Config network: [O ] Detect CD: [ O] Load installer modules: [O ] Detect hard drives: [ O] Partition hard drives: [ O] Create file systems: [ O] Mount partitions: [ O] Install base system: [ O] Install boot loader: [ O] Reboot: [ O] Comments/Problems: as usual, X11 fonts, resolution are not set as optimal, to first time user it might be a little bit hard to setup these things -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
