Package: src:linux
Version: 3.16.3-1
Severity: normal
Dear Maintainer,
the brightness control of my Laptop does not work anymore. It used to work
with the 3.14 kernel.
Previous behavior (3.14):
* When I drag the brightness slider in KDE, the OSD appears and the
brightness changes.
* After some minutes of inactivity with no AC (as configured in the
KDE power-saving options), the screen is dimmed.
* When I press the brightness keys on the keyboard, the brightness
changes *but* KDE does not notice, no OSD appears, and the brightness
slider in the battery applet does not move.
Current behavior (3.16):
* Dragging the brightness slider does nothing except for showing the OSD.
* No dimming on inactivity happens.
* Pressing the brightness ekys on the keyboard results in the KDE brightness
OSD appearing, without the brightness changing.
So the power system (KDE, presumably through upower?) now notices that
I press the power keys. However, the keys don't work anymore. Overall, this
is clearly a regression as I can now no longer control the brightness.
I bootet the current system with the old kernel to verify that the kernel
is the only part that changed.
I can do tests with vanilla kernels, git bisect, and/or report bugs upstream
if that helps to resolve the issue.
Kind regards
Ralf
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3
(Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-1 (2014-09-18)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-2-amd64 root=/dev/mapper/cryptvg-rootlv ro quiet
** Not tainted
** Kernel log:
[ 177.757395] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 177.770584] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 177.823759] ACPI: Battery Slot [BAT0] (battery present)
[ 177.823853] ACPI: AC Adapter [AC0] (on-line)
[ 177.837084] wmi: Mapper loaded
[ 177.840193] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042f conflicts with OpRegion
0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 177.840201] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 177.840227] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054f conflicts with OpRegion
0x0000000000000500-0x0000000000000549 (\SBGP) (20140424/utaddress-258)
[ 177.840231] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 177.840235] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 177.840237] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053f conflicts with OpRegion
0x0000000000000500-0x0000000000000549 (\SBGP) (20140424/utaddress-258)
[ 177.840240] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 177.840244] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 177.840246] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052f conflicts with OpRegion
0x0000000000000500-0x0000000000000549 (\SBGP) (20140424/utaddress-258)
[ 177.840249] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052f conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[ 177.840253] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 177.840254] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 177.843247] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 177.848625] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X
[ 177.857774] ACPI Warning: SystemIO range
0x000000000000e040-0x000000000000e05f conflicts with OpRegion
0x000000000000e040-0x000000000000e04f (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-258)
[ 177.857782] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 177.858251] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 177.862414] cfg80211: Calling CRDA to update world regulatory domain
[ 177.863687] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 177.870803] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,discard
[ 177.873049] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 177.873052] Copyright(c) 2003- 2014 Intel Corporation
[ 177.873308] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X
[ 177.885409] iwlwifi 0000:03:00.0: firmware: direct-loading firmware
iwlwifi-7260-9.ucode
[ 177.885672] iwlwifi 0000:03:00.0: loaded firmware version 23.214.9.0 op_mode
iwlmvm
[ 177.886292] intel_rapl: RAPL domain dram detection failed
[ 177.896902] sound hdaudioC0D0: autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 177.896907] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 177.896909] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 177.896911] sound hdaudioC0D0: mono: mono_out=0x0
[ 177.896913] sound hdaudioC0D0: inputs:
[ 177.896916] sound hdaudioC0D0: Internal Mic=0x19
[ 177.896918] sound hdaudioC0D0: Mic=0x18
[ 177.904971] iTCO_vendor_support: vendor-support=0
[ 177.905285] asus_wmi: ASUS WMI generic driver loaded
[ 177.906021] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 177.906049] asus_wmi: Initialization: 0x1
[ 177.906052] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 177.906166] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 177.906203] asus_wmi: SFUN value: 0x1a0af7
[ 177.906758] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC
7260, REV=0x144
[ 177.906966] input: Asus WMI hotkeys as
/devices/platform/asus-nb-wmi/input/input17
[ 177.907371] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 177.907679] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 177.912108] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 177.912194] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 177.912360] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 177.946549] cfg80211: World regulatory domain updated:
[ 177.946552] cfg80211: DFS Master region: unset
[ 177.946553] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 177.946556] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 177.946557] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 177.946558] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 177.946559] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 177.946561] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 177.946562] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 177.958563] media: Linux media interface: v0.10
[ 177.960225] Bluetooth: Core ver 2.19
[ 177.960243] NET: Registered protocol family 31
[ 177.960244] Bluetooth: HCI device and connection manager initialized
[ 177.960252] Bluetooth: HCI socket layer initialized
[ 177.960254] Bluetooth: L2CAP socket layer initialized
[ 177.960263] Bluetooth: SCO socket layer initialized
[ 177.962078] Linux video capture interface: v2.00
[ 177.972407] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam
(13d3:5710)
[ 177.977848] usbcore: registered new interface driver btusb
[ 177.979031] input: USB 2.0 UVC VGA WebCam as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input22
[ 177.980255] usbcore: registered new interface driver uvcvideo
[ 177.980258] USB Video Class driver (1.1.1)
[ 177.986054] asus_wmi: Backlight controlled by ACPI video driver
[ 177.988694] Bluetooth: hci0: read Intel version: 370710018002030d37
[ 177.988697] Bluetooth: hci0: Intel device is already patched. patch num: 37
[ 178.009348] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
errors=remount-ro,discard
[ 178.024238] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
errors=remount-ro,discard
[ 178.108929] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 178.652799] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id:
0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1704, fw id: 705499
[ 178.685237] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input21
[ 179.295751] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
errors=remount-ro
[ 179.596014] systemd-journald[252]: Received request to flush runtime journal
from PID 1
[ 179.875145] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 179.875149] Bluetooth: BNEP filters: protocol multicast
[ 179.875159] Bluetooth: BNEP socket layer initialized
[ 180.112138] r8169 0000:05:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168e-2.fw
[ 180.251512] r8169 0000:05:00.0 eth0: link down
[ 180.251551] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 180.253175] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 180.253424] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 180.266878] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 201.143870] wlan0: authenticate with bc:05:43:d0:14:c6
[ 201.147199] wlan0: send auth to bc:05:43:d0:14:c6 (try 1/3)
[ 201.149423] wlan0: authenticated
[ 201.151470] wlan0: associate with bc:05:43:d0:14:c6 (try 1/3)
[ 201.176848] wlan0: RX AssocResp from bc:05:43:d0:14:c6 (capab=0x431 status=0
aid=1)
[ 201.178111] wlan0: associated
[ 201.178164] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: K53SM
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: K53SM.214
board_vendor: ASUSTeK Computer Inc.
board_name: K53SM
board_version: 1.0
** Loaded modules:
ctr
ccm
bnep
binfmt_misc
rtsx_usb_ms
memstick
arc4
ecb
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
btusb
v4l2_common
joydev
videodev
bluetooth
media
6lowpan_iphc
iwlmvm
asus_nb_wmi
iTCO_wdt
asus_wmi
iTCO_vendor_support
mxm_wmi
snd_hda_codec_hdmi
sparse_keymap
mac80211
snd_hda_codec_realtek
snd_hda_codec_generic
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm_intel
kvm
iwlwifi
snd_hda_intel
psmouse
cfg80211
pcspkr
serio_raw
snd_hda_controller
snd_hda_codec
snd_hwdep
i2c_i801
rfkill
snd_pcm
mei_me
snd_timer
snd
mei
soundcore
shpchp
lpc_ich
wmi
ac
battery
processor
evdev
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
cuse
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
dm_crypt
dm_mod
hid_cherry
hid_generic
usbhid
hid
rtsx_usb_sdmmc
mmc_core
sg
rtsx_usb
mfd_core
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
libata
scsi_mod
r8169
mii
i915
i2c_algo_bit
ehci_pci
drm_kms_helper
xhci_hcd
ehci_hcd
drm
usbcore
usb_common
i2c_core
thermal
video
thermal_sys
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: db000000-dc0fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if
00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:212e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at df00a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at df008000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1ac3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de600000-deffffff
Prefetchable memory behind bridge: 00000000d4200000-00000000d4bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ddc00000-de5fffff
Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dd200000-ddbfffff
Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dc800000-dd1fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df007000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC
Controller [8086:1c49] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 48
Region 0: I/O ports at e0b0 [size=8]
Region 1: I/O ports at e0a0 [size=4]
Region 2: I/O ports at e090 [size=8]
Region 3: I/O ports at e080 [size=4]
Region 4: I/O ports at e060 [size=32]
Region 5: Memory at df006000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at df005000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at e040 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT
630M] [10de:0de9] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:212e]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at db000000 (32-bit, non-prefetchable) [disabled]
[size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [disabled]
[size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [disabled]
[size=32M]
Region 5: I/O ports at d000 [disabled] [size=128]
Expansion ROM at dc000000 [disabled] [size=512K]
Capabilities: <access denied>
03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1]
(rev 73)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at ddc00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB
Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1059]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:1277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: I/O ports at 9000 [size=256]
Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 005: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard G230
Bus 003 Device 004: ID 04b4:0033 Cypress Semiconductor Corp. Mouse
Bus 003 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card
Reader Controller
Bus 001 Device 004: ID 13d3:5710 IMC Networks UVC VGA Webcam
Bus 001 Device 003: ID 8087:07dc Intel Corp.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (100, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
