Package: src:linux
Version: 3.16.2-3
Severity: important
The touchpad was correctly detected and working with linux-image-3.14-2-amd64
(version 3.14.15-2). After upgrading to linux-image-3.16-1-amd64 (version
3.16.2-3), the touchpad is not detected. I noticed these lines in dmesg output:
---------------------------------------
[ 0.873994] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.873997] i8042: PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.874490] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.874745] mousedev: PS/2 mouse device common for all mice
---------------------------------------
So, I tried the suggestion (I edited /etc/default/grub to have
"GRUB_CMDLINE_LINUX='i8042.nopnp' " and I ran update-grub) and with that boot
option the touchpad is detected and working again:
---------------------------------------
$ dmesg | grep i8042
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-1-amd64
root=UUID=2aad5c97-b307-4e8b-a002-052f62e894b5 ro i8042.nopnp quiet
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-1-amd64
root=UUID=2aad5c97-b307-4e8b-a002-052f62e894b5 ro i8042.nopnp quiet
[ 0.878004] i8042: PNP detection disabled
[ 0.879540] i8042: Detected active multiplexing controller, rev 1.1
[ 0.880198] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.880209] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.880266] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.880316] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.880364] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.899438] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 12.288784] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input15
---------------------------------------
Regards,
-- Package-specific info:
** Version:
Linux version 3.16-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3
(Debian 4.8.3-10) ) #1 SMP Debian 3.16.2-3 (2014-09-13)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-1-amd64
root=UUID=2aad5c97-b307-4e8b-a002-052f62e894b5 ro i8042.nopnp quiet
** Not tainted
** Kernel log:
[ 6.731665] systemd[1]: Starting Load Kernel Modules...
[ 6.733191] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.734583] systemd[1]: Starting udev Coldplug all Devices...
[ 6.736245] systemd[1]: Mounting Debug File System...
[ 6.737524] systemd[1]: Starting Syslog.
[ 6.737584] systemd[1]: Reached target Syslog.
[ 6.737712] systemd[1]: Starting Journal Service...
[ 6.739256] systemd[1]: Started Journal Service.
[ 7.259711] lp: driver loaded but no devices found
[ 7.480693] ppdev: user-space parallel port driver
[ 7.864458] fuse init (API version 7.23)
[ 7.980779] loop: module loaded
[ 8.354931] systemd-udevd[178]: starting version 208
[ 10.465107] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 10.580522] ACPI Warning: SystemIO range
0x0000000000002000-0x000000000000201f conflicts with OpRegion
0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI)
(20140424/utaddress-258)
[ 10.580533] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 10.610608] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.824580] EFI Variables Facility v0.08 2004-May-17
[ 10.881471] ACPI: AC Adapter [ACAD] (off-line)
[ 10.883016] ACPI: Battery Slot [BAT1] (battery present)
[ 10.887029] pstore: Registered efi as persistent store backend
[ 10.999395] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 11.311335] cfg80211: Calling CRDA to update world regulatory domain
[ 11.493476] snd_hda_intel 0000:00:1b.0: irq 107 for MSI/MSI-X
[ 11.501157] media: Linux media interface: v0.10
[ 11.512889] Bluetooth: Core ver 2.19
[ 11.512913] NET: Registered protocol family 31
[ 11.512916] Bluetooth: HCI device and connection manager initialized
[ 11.512925] Bluetooth: HCI socket layer initialized
[ 11.512929] Bluetooth: L2CAP socket layer initialized
[ 11.512943] Bluetooth: SCO socket layer initialized
[ 11.529681] Linux video capture interface: v2.00
[ 11.553833] alg: No test for crc32 (crc32-pclmul)
[ 11.601584] ath: phy0: ASPM enabled: 0x42
[ 11.601592] ath: EEPROM regdomain: 0x6c
[ 11.601595] ath: EEPROM indicates we should expect a direct regpair map
[ 11.601600] ath: Country alpha2 being used: 00
[ 11.601602] ath: Regpair used: 0x6c
[ 11.728547] sound hdaudioC0D0: autoconfig: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.728571] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.728588] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 11.728600] sound hdaudioC0D0: mono: mono_out=0x0
[ 11.728612] sound hdaudioC0D0: inputs:
[ 11.728627] sound hdaudioC0D0: Mic=0x1b
[ 11.768968] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.770536] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004a80000,
irq=17
[ 11.920999] usbcore: registered new interface driver btusb
[ 12.044515] usbcore: registered new interface driver ath3k
[ 12.067207] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input16
[ 12.067787] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.067904] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 12.140373] intel_rapl: RAPL domain uncore detection failed
[ 12.140379] intel_rapl: RAPL domain dram detection failed
[ 12.195208] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c57)
[ 12.203954] input: HD WebCam as
/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19
[ 12.204088] usbcore: registered new interface driver uvcvideo
[ 12.204091] USB Video Class driver (1.1.1)
[ 12.241946] iTCO_vendor_support: vendor-support=0
[ 12.254949] psmouse serio2: synaptics: Touchpad model: 1, fw: 8.1, id:
0x1e2b1, caps: 0xd40123/0x840300/0x126800, board id: 2991, fw id: 1626681
[ 12.288784] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input15
[ 12.456345] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.456514] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3,
TCOBASE=0x0460)
[ 12.457113] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.391008] cfg80211: World regulatory domain updated:
[ 13.391027] cfg80211: DFS Master region: unset
[ 13.391036] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.391053] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 13.391066] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 13.391079] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 13.391091] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 13.391104] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 13.391117] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 14.274330] Adding 4194300k swap on /dev/sda6. Priority:-1 extents:1
across:4194300k FS
[ 15.132416] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 15.662887] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts:
(null)
[ 15.712613] systemd-journald[143]: Received request to flush runtime journal
from PID 1
[ 16.808341] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.055668] RPC: Registered named UNIX socket transport module.
[ 17.055674] RPC: Registered udp transport module.
[ 17.055676] RPC: Registered tcp transport module.
[ 17.055678] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.080458] FS-Cache: Loaded
[ 17.112507] FS-Cache: Netfs 'nfs' registered for caching
[ 17.195151] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 20.728860] r8169 0000:03:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168g-2.fw
[ 20.771538] r8169 0000:03:00.0 eth0: link down
[ 20.771640] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.773061] wlan0: authenticate with 38:72:c0:d5:6d:9c
[ 20.782993] wlan0: send auth to 38:72:c0:d5:6d:9c (try 1/3)
[ 20.785002] wlan0: authenticated
[ 20.793313] wlan0: associate with 38:72:c0:d5:6d:9c (try 1/3)
[ 20.796880] wlan0: RX AssocResp from 38:72:c0:d5:6d:9c (capab=0x411 status=0
aid=6)
[ 20.796966] wlan0: associated
[ 20.797011] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.000157] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.000168] Bluetooth: BNEP filters: protocol multicast
[ 24.000187] Bluetooth: BNEP socket layer initialized
[ 65.118707] Bluetooth: RFCOMM TTY layer initialized
[ 65.118724] Bluetooth: RFCOMM socket layer initialized
[ 65.118733] Bluetooth: RFCOMM ver 1.11
** Model information
sys_vendor: Acer
product_name: TravelMate B115-M
product_version: V1.04
chassis_vendor: Chassis Manufacturer
chassis_version: Chassis Version
bios_vendor: Insyde Corp.
bios_version: V1.04
board_vendor: Acer
board_name: Roxy
board_version: Type2 - A01 Board Version
** Loaded modules:
rfcomm
bnep
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
cpufreq_userspace
ctr
ccm
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
iTCO_wdt
intel_powerclamp
iTCO_vendor_support
uvcvideo
intel_rapl
videobuf2_vmalloc
kvm_intel
videobuf2_memops
ath3k
snd_hda_codec_hdmi
ecb
joydev
btusb
videobuf2_core
kvm
arc4
snd_hda_codec_realtek
snd_hda_codec_generic
ath9k
v4l2_common
crc32_pclmul
ath9k_common
videodev
ath9k_hw
bluetooth
media
snd_hda_intel
ath
ghash_clmulni_intel
snd_hda_controller
mac80211
cryptd
6lowpan_iphc
snd_hda_codec
snd_hwdep
cfg80211
snd_pcm_oss
psmouse
snd_mixer_oss
pcspkr
snd_pcm
serio_raw
snd_timer
efi_pstore
efivars
evdev
snd
intel_smartconnect
battery
ac
i2c_designware_platform
i2c_designware_core
soundcore
shpchp
i2c_i801
lpc_ich
mfd_core
int3403_thermal
iosf_mbi
processor
coretemp
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
acer_wmi
rfkill
sparse_keymap
crct10dif_pclmul
crct10dif_common
crc32c_intel
thermal
i915
ahci
i2c_algo_bit
wmi
libahci
video
drm_kms_helper
xhci_hcd
r8169
mii
libata
button
drm
i2c_core
thermal_sys
usbcore
usb_common
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series SoC Transaction Register [8086:0f00] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e) (prog-if 00 [VGA
controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 106
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2050 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:13.0 SATA controller [0106]: Intel Corporation Device [8086:0f23] (rev 0e)
(prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 105
Region 0: I/O ports at 2048 [size=8]
Region 1: I/O ports at 205c [size=4]
Region 2: I/O ports at 2040 [size=8]
Region 3: I/O ports at 2058 [size=4]
Region 4: I/O ports at 2020 [size=32]
Region 5: Memory at 9091f000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 103
Region 0: Memory at 90900000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor
Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 90800000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at 90700000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series High Definition Audio Controller [8086:0f04] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 107
Region 0: Memory at 90910000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:0f48] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Device [8086:0f4a] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 90600000-906fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Device [8086:0f4c] (rev 0e)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 90500000-905fffff
Prefetchable memory behind bridge: 0000000090400000-00000000904fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx
Series Power Control Unit [8086:0f1c] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:0f12] (rev 0e)
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at 90919000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at 2000 [size=32]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network
Adapter [168c:0034] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e052]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at 90680000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Acer Incorporated [ALI] Device [1025:0860]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 104
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at 90500000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at 90400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 1bcf:2c57 Sunplus Innovation Technology Inc.
Bus 001 Device 004: ID 0489:e04e Foxconn / Hon Hai
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'oldstable-updates'), (500,
'unstable'), (500, 'stable'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.16-1-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
ii linux-doc-3.16 3.16.2-3
Versions of packages linux-image-3.16-1-amd64 is related to:
ii firmware-atheros 0.43
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-1-amd64/postinst/depmod-error-initrd-3.16-1-amd64: false
linux-image-3.16-1-amd64/prerm/removing-running-kernel-3.16-1-amd64: true
linux-image-3.16-1-amd64/postinst/mips-initrd-3.16-1-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
