Package: src:linux
Version: 3.2.60-1+deb7u3
Severity: important

Dear Maintainer,
The current Debian 7 kernel only has the 4.2.220 version of the
be2net driver:

        $ sudo ethtool -i eth0
        driver: be2net
        version: 4.2.220u
        firmware-version: 4.6.247.5
        bus-info: 0000:02:00.0
        supports-statistics: yes
        supports-test: yes
        supports-eeprom-access: yes
        supports-register-dump: yes
        supports-priv-flags: no

        $ strings .../ethernet/emulex/benet/be2net.ko
        [...]
        description=ServerEngines BladeEngine 10Gbps NIC Driver 4.2.220u
        version=4.2.220u
        srcversion=37BCB0144B22E0B05771D68
        alias=pci:v000010DFd00000720sv*sd*bc*sc*i*
        alias=pci:v000010DFd0000E228sv*sd*bc*sc*i*
        [...]

Recently we had a server drop off the network (but still responsive
at the console) with the following message being output:

        kernel: [18336042.212047] be2net 0000:02:00.2: Out of MCCQ wrbs
        kernel: [18336042.212079] be2net 0000:02:00.2: Out of MCCQ wrbs
        kernel: [18336042.212910] be2net 0000:02:00.3: Out of MCCQ wrbs

A search of that error led to, among other pages, this HP advisory:

http://tinyurl.com/lsco3xz
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03501857-3%257CdocLocale%253D%257CcalledBy%253D&ac.admitted=1409417693540.876444892.492883150

While the advisory says the issue is in 4.1.450.7-2 (or earlier), it seems
to still be present in 4.2.220. Regardless, they recommend going to
4.2.389 or newer.

I'd like to request that '389 be pulled into the 3.2 kernel, and if possible
the updated kernel also be brought into squeeze-backports.


-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.57-3+deb7u1

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 
root=UUID=3b5fcab2-2640-472d-b271-8a6d433d9baa ro crashkernel=256M quiet

** Not tainted

** Model information
sys_vendor: HP
product_name: ProLiant BL460c G7
product_version: 
chassis_vendor: HP
chassis_version: 
bios_vendor: HP
bios_version: I27

** Loaded modules:
fuse
btrfs
libcrc32c
zlib_deflate
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext4
crc16
jbd2
ext2
efivars
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
rpcsec_gss_krb5
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
8021q
garp
stp
vhost_net
tun
macvtap
macvlan
loop
kvm_intel
kvm
coretemp
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
hpwdt
i7core_edac
aes_generic
snd_pcm
hpilo
processor
iTCO_wdt
edac_core
joydev
iTCO_vendor_support
container
button
cryptd
snd_page_alloc
snd_timer
snd
soundcore
psmouse
serio_raw
evdev
pcspkr
acpi_power_meter
ext3
mbcache
jbd
dm_mod
usbhid
hid
sd_mod
sg
crc_t10dif
uhci_hcd
ehci_hcd
hpsa
scsi_mod
usbcore
usb_common
thermal
thermal_sys
be2net

** PCI devices:
02:00.0 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Region 0: Memory at fbcf0000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fbcc0000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fbca0000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8000000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.1 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 34
        Region 0: Memory at fbc90000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fbc60000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fbc40000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8040000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.2 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 35
        Region 0: Memory at fbc30000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fbc00000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fbbe0000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8180000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.3 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 36
        Region 0: Memory at fbbd0000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fbba0000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fbb80000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8190000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.4 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 24
        Region 0: Memory at fbb70000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fbb40000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fbb20000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8080000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.5 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 34
        Region 0: Memory at fbb10000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fbae0000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fbac0000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f80c0000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.6 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 35
        Region 0: Memory at fbab0000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fba80000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fba60000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8100000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

02:00.7 Ethernet controller [0200]: Emulex Corporation OneConnect 10Gb NIC 
(be3) [19a2:0710] (rev 01)
        Subsystem: Hewlett-Packard Company NC553i 10Gb 2-port FlexFabric 
Converged Network Adapter [103c:3315]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 36
        Region 0: Memory at fba50000 (64-bit, non-prefetchable) [size=16K]
        Region 2: Memory at fba20000 (64-bit, non-prefetchable) [size=128K]
        Region 4: Memory at fba00000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f8140000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: be2net

-- System Information:
Debian Release: 7.5
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/24 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u2
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information excluded


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to