Am 11.08.2014 15:10, schrieb David Baron: > On Monday 11 August 2014 14:13:23 you wrote: >> Am 11.08.2014 12:58, schrieb David Baron: >>> On Monday 11 August 2014 12:28:39 Michael Biebl wrote: >>>> Am 11.08.2014 11:50, schrieb David Baron: >>>>> Package: udev >>>>> Version: 208-7 >>>>> Severity: normal >>>>> >>>>> --- Please enter the report below this line. --- >>>>> Module use to auto-load as of 2.04.14 >>>>> Workaround is simple enough: manually or rc.local modprobe snd-seq >>>> >>>> Have you rebooted after the upgrade to 208-7? >>>> Do you have a /dev/snd/seq device after the reboot? >>>> The 208-7 package has a fix for udev under sysvinit to create the dead >>>> /dev/snd/seq device node. >>>> >>>> With that device available accessing /dev/snd/seq does auto-load the >>>> snd-seq module here. >>> >>> Was rebooted. First thing I tried. >> >> What is the output of >> "kmod static-nodes --format=tmpfiles" > > I assume you want this without my modprobing. > > This is what I get now, after having modprobed and qjackqtl runs: > ~$ sudo kmod static-nodes --format=tmpfiles > c /dev/autofs 0600 - - - 10:235 > c /dev/fuse 0600 - - - 10:229 > c /dev/cuse 0600 - - - 10:203 > c /dev/btrfs-control 0600 - - - 10:234 > c /dev/loop-control 0600 - - - 10:237 > d /dev/net 0755 - - - > c /dev/net/tun 0600 - - - 10:200 > c /dev/ppp 0600 - - - 108:0 > c /dev/uinput 0600 - - - 10:223 > d /dev/mapper 0755 - - - > c /dev/mapper/control 0600 - - - 10:236 > d /dev/vfio 0755 - - - > c /dev/vfio/vfio 0600 - - - 10:196 > c /dev/vhci 0600 - - - 10:137 > c /dev/uhid 0600 - - - 10:239 > c /dev/vhost-net 0600 - - - 10:238 > d /dev/snd 0755 - - - > c /dev/snd/timer 0600 - - - 116:33 > d /dev/snd 0755 - - - > c /dev/snd/seq 0600 - - - 116:1 > > >> Please add "set -x" to your /etc/init.d/udev init script and attach the >> output you get during boot. >> >>> What about same fix but using systemd? >> >> Not sure what you mean by that? > Systemd is the bootup system, not sysvinit (for which 208-7 was fixed).
Ok, this was not clear from your bug report. > I am still running the 204.14 systemd. Oh, you shouldn't probably mix systemd 204 with udev 208. The creation of static device nodes was moved out of udev. Under systemd this is now handled by /lib/systemd/system/kmod-static-nodes.service (which is shipped in the systemd package), under sysvinit, we added the creation of the static device nodes to the /etc/init.d/udev init script. Since you upgraded udev to 208, but kept systemd at 204, you ended up with this broken setup. Please update systemd to 208 as well and try again. To avoid this version mismatches, we might make systemd have a strictly versioned dependency on udev. Marco, what do you think? Michael -- Why is it that all of the instruments seeking intelligent life in the universe are pointed away from Earth?
signature.asc
Description: OpenPGP digital signature
