Package: src:linux
Version: 3.14.13-1
Severity: important
Tags: upstream
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Installing and booting a 3.14.x long term stable kernel.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Booting with kernels 3.2.x provide expected sound output.
* What was the outcome of this action?
Sound plays twice as fast as it should.
* What outcome did you expect instead?
Sound should play at normal speed.
-- Package-specific info:
** Version:
Linux version 3.14-2-686-pae (debian-ker...@lists.debian.org) (gcc version
4.8.3 (Debian 4.8.3-5) ) #1 SMP Debian 3.14.13-1 (2014-07-21)
** Command line:
BOOT_IMAGE=/vmlinuz-3.14-2-686-pae root=/dev/mapper/Debian-root ro quiet
nosplash acpi_backlight=vendor acpi_osi=Linux pcie_aspm=force mem=1920mb
init=/bin/systemd
** Not tainted
** Kernel log:
[ 5.395305] sony_laptop: Sony Notebook Control Driver v0.6
[ 5.454795] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.458931] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 5.459136] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.459143] [drm] No driver support for vblank timestamp query.
[ 5.465674] cfg80211: Calling CRDA to update world regulatory domain
[ 5.735791] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.924912] kvm: disabled by bios
[ 6.085998] ath: phy0: ASPM enabled: 0x42
[ 6.086015] ath: EEPROM regdomain: 0x65
[ 6.086021] ath: EEPROM indicates we should expect a direct regpair map
[ 6.086032] ath: Country alpha2 being used: 00
[ 6.086037] ath: Regpair used: 0x65
[ 6.128674] psmouse serio1: alps: Unknown ALPS touchpad: E7=42 02 0a, EC=10
00 64
[ 6.225124] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.226385] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8c60000, irq=17
[ 6.278333] random: nonblocking pool is initialized
[ 6.508567] Bluetooth: Core ver 2.18
[ 6.508630] NET: Registered protocol family 31
[ 6.508636] Bluetooth: HCI device and connection manager initialized
[ 6.508657] Bluetooth: HCI socket layer initialized
[ 6.508667] Bluetooth: L2CAP socket layer initialized
[ 6.508698] Bluetooth: SCO socket layer initialized
[ 6.526831] usbcore: registered new interface driver btusb
[ 6.657694] media: Linux media interface: v0.10
[ 6.686097] Linux video capture interface: v2.00
[ 6.739800] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b2)
[ 6.747821] input: UVC Camera (05ca:18b2) as
/devices/pci0000:00/0000:00:1d.7/usb4/4-8/4-8:1.0/input/input9
[ 6.749676] usbcore: registered new interface driver uvcvideo
[ 6.749686] USB Video Class driver (1.1.1)
[ 6.763509] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/input/input7
[ 6.869373] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 7.310722] Adding 2654204k swap on /dev/mapper/Debian-swap_1. Priority:-1
extents:1 across:2654204k SS
[ 7.458958] cfg80211: World regulatory domain updated:
[ 7.458971] cfg80211: DFS Master region: unset
[ 7.458976] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 7.458984] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 7.458990] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 7.458995] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm)
[ 7.459001] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm)
[ 7.459007] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm)
[ 7.459013] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm)
[ 7.914109] gma500 0000:00:02.0: trying to get vblank count for disabled
pipe 0
[ 7.914279] gma500 0000:00:02.0: trying to get vblank count for disabled
pipe 0
[ 8.138014] checking generic (7f800000 4b0000) vs hw (7f800000 7bf000)
[ 8.138022] fb: conflicting fb hw usage psbdrmfb vs simple - removing
generic driver
[ 8.138105] Console: switching to colour dummy device 80x25
[ 8.146874] fbcon: psbdrmfb (fb0) is primary device
[ 8.512437] Console: switching to colour frame buffer device 200x48
[ 8.534431] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[ 8.534439] gma500 0000:00:02.0: registered panic notifier
[ 8.534662] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12
[ 8.534691] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on
minor 0
[ 8.548278] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 8.582702] hda_codec: ALC262: SKU not ready 0x411111f0
[ 8.588522] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 8.605751] input: HDA Intel MID Headphone Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.632054] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12
[ 9.077391] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.131546] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts:
user_xattr
[ 9.185475] systemd-journald[145]: Received request to flush runtime journal
from PID 1
[ 10.604349] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.604361] Bluetooth: BNEP filters: protocol multicast
[ 10.604393] Bluetooth: BNEP socket layer initialized
[ 10.856412] sky2 0000:01:00.0 eth0: enabling interface
[ 10.872887] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.148383] gma500 0000:00:02.0: Backlight lvds set brightness 7a125f36
[ 11.148429] gma500 0000:00:02.0: Backlight lvds set brightness 7a125f36
[ 13.495224] gma500 0000:00:02.0: Backlight lvds set brightness 7a125f36
[ 13.495270] gma500 0000:00:02.0: Backlight lvds set brightness 7a125f36
[ 13.582197] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.229579] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.506942] sky2 0000:01:00.0 eth0: disabling interface
[ 21.521298] sky2 0000:01:00.0 eth0: enabling interface
[ 21.521501] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.038137] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.225240] wlan0: authenticate with e8:94:f6:e2:78:f6
[ 25.240414] wlan0: send auth to e8:94:f6:e2:78:f6 (try 1/3)
[ 25.242564] wlan0: authenticated
[ 25.244460] wlan0: associate with e8:94:f6:e2:78:f6 (try 1/3)
[ 25.250111] wlan0: RX AssocResp from e8:94:f6:e2:78:f6 (capab=0x431 status=0
aid=1)
[ 25.250226] wlan0: associated
[ 25.250252] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 25.250536] cfg80211: Calling CRDA for country: ES
[ 25.422650] ath: EEPROM regdomain: 0x82d4
[ 25.422659] ath: EEPROM indicates we should expect a country code
[ 25.422666] ath: doing EEPROM country->regdmn map search
[ 25.422672] ath: country maps to regdmn code: 0x37
[ 25.422676] ath: Country alpha2 being used: ES
[ 25.422681] ath: Regpair used: 0x37
[ 25.422687] ath: regdomain 0x82d4 dynamically updated by country IE
[ 25.422751] cfg80211: Regulatory domain changed to country: ES
[ 25.422757] cfg80211: DFS Master region: unset
[ 25.422762] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 25.422769] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 25.422775] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm)
[ 25.422781] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000
mBm)
[ 25.422787] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698
mBm)
[ 25.422793] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A,
4000 mBm)
[ 84.923803] perf samples too long (2546 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
** Model information
not available
** Loaded modules:
ctr
ccm
bnep
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
binfmt_misc
snd_hda_codec_realtek
i2c_isch
snd_hda_codec_generic
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
btusb
bluetooth
6lowpan_iphc
arc4
kvm
pcspkr
psmouse
evdev
serio_raw
ath9k
ath9k_common
ath9k_hw
ath
mac80211
cfg80211
snd_hda_intel
lpc_sch
mfd_core
snd_hda_codec
snd_hwdep
button
sony_laptop
rfkill
gma500_gfx
snd_pcm_oss
snd_mixer_oss
drm_kms_helper
snd_pcm
snd_timer
drm
snd
soundcore
i2c_algo_bit
video
shpchp
i2c_core
acpi_cpufreq
battery
ac
processor
coretemp
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
pata_sch
libata
scsi_mod
ehci_pci
sky2
thermal
thermal_sys
uhci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH
Poulsbo) [8086:8100] (rev 06)
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller
Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 06) (prog-if 00 [VGA
controller])
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 94200000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 6070 [size=8]
Region 2: Memory at 80000000 (32-bit, non-prefetchable) [size=256M]
Region 3: Memory at 94280000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: gma500
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH
Poulsbo) HD Audio Controller [8086:811b] (rev 06)
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at 942c0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 1 [8086:8110] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00005fff
Memory behind bridge: 93100000-941fffff
Prefetchable memory behind bridge: 90000000-90ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH
Poulsbo) PCI Express Port 2 [8086:8112] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 92000000-930fffff
Prefetchable memory behind bridge: 91000000-91ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #1 [8086:8114] (rev 06) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 6040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #2 [8086:8115] (rev 06) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 6020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB UHCI #3 [8086:8116] (rev 06) (prog-if 00 [UHCI])
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 23
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation System Controller Hub (SCH
Poulsbo) USB EHCI #1 [8086:8117] (rev 06) (prog-if 20 [EHCI])
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 20
Region 0: Memory at 942c4000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH
Poulsbo) LPC Bridge [8086:8119] (rev 06)
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: lpc_sch
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH
Poulsbo) IDE Controller [8086:811a] (rev 06) (prog-if 80 [Master])
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at 6060 [size=16]
Kernel driver in use: pata_sch
01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8057 PCI-E
Gigabit Ethernet Controller [11ab:4380] (rev 10)
Subsystem: Sony Corporation Device [104d:9039]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at 93100000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 4000 [size=256]
Expansion ROM at 90000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
02:00.0 Network controller [0280]: Qualcomm Atheros AR928X Wireless Network
Adapter (PCI-Express) [168c:002a] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 92000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 004 Device 003: ID 05ca:18b2 Ricoh Co., Ltd
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 044e:3017 Alps Electric Co., Ltd BCM2046 Bluetooth Device
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (300, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.14-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.14-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.14-2-686-pae recommends:
ii firmware-linux-free 3.3
ii libc6-i686 2.19-7
Versions of packages linux-image-3.14-2-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.14 <none>
Versions of packages linux-image-3.14-2-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.14-2-686-pae/postinst/mips-initrd-3.14-2-686-pae:
linux-image-3.14-2-686-pae/prerm/removing-running-kernel-3.14-2-686-pae: true
linux-image-3.14-2-686-pae/postinst/depmod-error-initrd-3.14-2-686-pae: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
