This is the whole output of dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.10-1 (2014-04-15) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13-1-amd64 root=/dev/mapper/g0-root ro quiet acpi_backlight=vendor libata.force=2.0:disable [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a4570fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a4571000-0x00000000a469bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a469c000-0x00000000a6dbefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a6dbf000-0x00000000a6ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire S3/Aspire S3, BIOS 1.18 02/20/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable [ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask FC0000000 write-back [ 0.000000] 7 base 140000000 mask FF0000000 write-back [ 0.000000] 8 base 14FE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a9a000, 0x01a9afff] PGTABLE [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14fc00000-0x14fdfffff] [ 0.000000] [mem 0x14fc00000-0x14fdfffff] page 2M [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14fbfffff] [ 0.000000] [mem 0x14c000000-0x14fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x14bffffff] page 2M [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa4570fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xa43fffff] page 2M [ 0.000000] [mem 0xa4400000-0xa4570fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa469c000-0xa6dbefff] [ 0.000000] [mem 0xa469c000-0xa47fffff] page 4k [ 0.000000] [mem 0xa4800000-0xa6bfffff] page 2M [ 0.000000] [mem 0xa6c00000-0xa6dbefff] page 4k [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff] [ 0.000000] [mem 0xa6fff000-0xa6ffffff] page 4k [ 0.000000] RAMDISK: [mem 0x363a2000-0x371c8fff] [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 00000000a6ffe120 000094 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 00000000a6ffc000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 00000000a6fed000 00B218 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 00000000a6f6c000 000040 [ 0.000000] ACPI: ASF! 00000000a6ffd000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 00000000a6ffb000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 00000000a6ffa000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 00000000a6ff9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 00000000a6fec000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: WDAT 00000000a6feb000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 00000000a6fe9000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 00000000a6fe7000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 00000000a6fe4000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 00000000a6fe3000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 00000000a6fe2000 000846 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 00000000a6fe1000 000996 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: DMAR 00000000a6fe0000 0000E8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14fdfffff] [ 0.000000] NODE_DATA [mem 0x14fdf6000-0x14fdfafff] [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014b600000-ffff88014edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xa4570fff] [ 0.000000] node 0: [mem 0xa469c000-0xa6dbefff] [ 0.000000] node 0: [mem 0xa6fff000-0xa6ffffff] [ 0.000000] node 0: [mem 0x100000000-0x14fdfffff] [ 0.000000] On node 0 totalpages: 1010225 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9285 pages used for memmap [ 0.000000] DMA32 zone: 679061 pages, LIFO batch:31 [ 0.000000] Normal zone: 4473 pages used for memmap [ 0.000000] Normal zone: 327168 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa4571000-0xa469bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6dbf000-0xa6ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014fa00000 s85824 r8192 d20672 u262144 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 996255 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-1-amd64 root=/dev/mapper/g0-root ro quiet acpi_backlight=vendor libata.force=2.0:disable [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3890300K/4040900K available (4811K kernel code, 693K rwdata, 1620K rodata, 984K init, 952K bss, 150600K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1696.000 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.00 BogoMIPS (lpj=6784000) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000038] Security Framework initialized [ 0.000043] AppArmor: AppArmor disabled by boot time parameter [ 0.000045] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000388] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001591] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002106] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002113] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002354] Initializing cgroup subsys memory [ 0.002361] Initializing cgroup subsys devices [ 0.002363] Initializing cgroup subsys freezer [ 0.002365] Initializing cgroup subsys blkio [ 0.002367] Initializing cgroup subsys perf_event [ 0.002396] CPU: Physical Processor ID: 0 [ 0.002397] CPU: Processor Core ID: 0 [ 0.002403] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002403] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002407] mce: CPU supports 7 MCE banks [ 0.002419] CPU0: Thermal monitoring handled by SMI [ 0.002430] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002430] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002430] tlb_flushall_shift: 5 [ 0.002548] Freeing SMP alternatives memory: 20K (ffffffff819a5000 - ffffffff819aa000) [ 0.004325] ACPI: Core revision 20131115 [ 0.010874] ACPI: All ACPI Tables successfully acquired [ 0.021579] dmar: Host address width 36 [ 0.021581] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.021590] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.021592] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.021597] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.021599] dmar: RMRR base: 0x000000a6e9b000 end: 0x000000a6ebafff [ 0.021601] dmar: RMRR base: 0x000000a7800000 end: 0x000000af9fffff [ 0.021674] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.021676] HPET id 0 under DRHD base 0xfed91000 [ 0.021677] HPET id 0 under DRHD base 0xfed91000 [ 0.021678] HPET id 0 under DRHD base 0xfed91000 [ 0.021680] HPET id 0 under DRHD base 0xfed91000 [ 0.021681] HPET id 0 under DRHD base 0xfed91000 [ 0.021682] HPET id 0 under DRHD base 0xfed91000 [ 0.021684] HPET id 0 under DRHD base 0xfed91000 [ 0.021685] HPET id 0 under DRHD base 0xfed91000 [ 0.021966] Enabled IRQ remapping in x2apic mode [ 0.021968] Enabling x2apic [ 0.021969] Enabled x2apic [ 0.021975] Switched APIC routing to cluster x2apic. [ 0.022445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062145] smpboot: CPU0: Intel(R) Core(TM) i7-2637M CPU @ 1.70GHz (fam: 06, model: 2a, stepping: 07) [ 0.062155] TSC deadline timer enabled [ 0.062166] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.062174] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.062177] ... version: 3 [ 0.062178] ... bit width: 48 [ 0.062180] ... generic registers: 4 [ 0.062181] ... value mask: 0000ffffffffffff [ 0.062182] ... max period: 0000ffffffffffff [ 0.062184] ... fixed-purpose events: 3 [ 0.062185] ... event mask: 000000070000000f [ 0.062552] x86: Booting SMP configuration: [ 0.073715] CPU1: Thermal monitoring handled by SMI [ 0.075911] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.086996] CPU2: Thermal monitoring handled by SMI [ 0.100177] CPU3: Thermal monitoring handled by SMI [ 0.062555] .... node #0, CPUs: #1 #2 #3 [ 0.102287] x86: Booted up 1 node, 4 CPUs [ 0.102292] smpboot: Total of 4 processors activated (13568.00 BogoMIPS) [ 0.107282] devtmpfs: initialized [ 0.110640] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes) [ 0.110873] NET: Registered protocol family 16 [ 0.110983] cpuidle: using governor ladder [ 0.110985] cpuidle: using governor menu [ 0.111028] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.111030] ACPI: bus type PCI registered [ 0.111032] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.111130] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.111133] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.139781] PCI: Using configuration type 1 for base access [ 0.140564] bio: create slab <bio-0> at 0 [ 0.140711] ACPI: Added _OSI(Module Device) [ 0.140714] ACPI: Added _OSI(Processor Device) [ 0.140715] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.140717] ACPI: Added _OSI(Processor Aggregator Device) [ 0.143937] ACPI: Executed 1 blocks of module-level executable AML code [ 0.159119] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.159613] ACPI: SSDT 00000000a6e70798 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.160032] ACPI: Dynamic OEM Table Load: [ 0.160034] ACPI: SSDT (null) 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.171396] ACPI: SSDT 00000000a6e71a98 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.171852] ACPI: Dynamic OEM Table Load: [ 0.171855] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.183220] ACPI: SSDT 00000000a6e6fd98 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.183624] ACPI: Dynamic OEM Table Load: [ 0.183627] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.197455] ACPI: Interpreter enabled [ 0.197464] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.197470] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.197481] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580) [ 0.197489] ACPI: (supports S0 S3 S5) [ 0.197491] ACPI: Using IOAPIC for interrupt routing [ 0.197523] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.197923] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.205437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.205445] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.205491] \_SB_.PCI0:_OSC invalid UUID [ 0.205493] _OSC request data:1 1f 0 [ 0.205498] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.206412] PCI host bridge to bus 0000:00 [ 0.206416] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.206419] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.206421] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.206424] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.206426] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.206437] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.206552] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.206567] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.206575] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.206581] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.206732] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.206761] pci 0000:00:16.0: reg 0x10: [mem 0xc0504000-0xc050400f 64bit] [ 0.206847] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.206965] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.207278] pci 0000:00:1a.0: reg 0x10: [mem 0xc0509000-0xc05093ff] [ 0.208957] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.209039] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.209087] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.209107] pci 0000:00:1b.0: reg 0x10: [mem 0xc0500000-0xc0503fff 64bit] [ 0.209187] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.209251] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.209295] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.209427] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.209501] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.209552] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.209683] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.209755] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.209802] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.210094] pci 0000:00:1d.0: reg 0x10: [mem 0xc0508000-0xc05083ff] [ 0.211777] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.211857] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.211901] pci 0000:00:1f.0: [8086:1c47] type 00 class 0x060100 [ 0.212111] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.212134] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.212145] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097] [ 0.212156] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.212166] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093] [ 0.212177] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.212188] pci 0000:00:1f.2: reg 0x24: [mem 0xc0507000-0xc05077ff] [ 0.212241] pci 0000:00:1f.2: PME# supported from D3hot [ 0.212335] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.212355] pci 0000:00:1f.3: reg 0x10: [mem 0xc0505000-0xc05050ff 64bit] [ 0.212380] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f] [ 0.212578] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.212730] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000 [ 0.212776] pci 0000:02:00.0: reg 0x10: [mem 0xc0400000-0xc047ffff 64bit] [ 0.212865] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.212960] pci 0000:02:00.0: supports D1 D2 [ 0.212962] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213009] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.219239] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.219261] pci 0000:00:1c.5: bridge window [mem 0xc0400000-0xc04fffff] [ 0.219935] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.220008] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.220078] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.220147] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.220216] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.220285] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.220352] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.220420] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.220685] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.220694] ACPI: \_SB_.PCI0: notify handler is installed [ 0.220752] Found 1 acpi root devices [ 0.220796] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.220887] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.220890] vgaarb: loaded [ 0.220892] vgaarb: bridge control possible 0000:00:02.0 [ 0.220935] PCI: Using ACPI for IRQ routing [ 0.228339] PCI: pci_cache_line_size set to 64 bytes [ 0.228396] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.228399] e820: reserve RAM buffer [mem 0xa4571000-0xa7ffffff] [ 0.228401] e820: reserve RAM buffer [mem 0xa6dbf000-0xa7ffffff] [ 0.228403] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff] [ 0.228405] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff] [ 0.228528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.228535] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.230559] Switched to clocksource hpet [ 0.232490] pnp: PnP ACPI init [ 0.232504] ACPI: bus type PNP registered [ 0.232555] pnp 00:00: [dma 4] [ 0.232580] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.232612] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.232721] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.232759] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.232807] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.232811] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.232814] system 00:04: [io 0x1010-0x1013] has been reserved [ 0.232817] system 00:04: [io 0xffff] has been reserved [ 0.232820] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.232823] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.232825] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.232828] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.232831] system 00:04: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.232835] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.232866] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.232912] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.232916] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.232996] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.233030] pnp 00:08: Plug and Play ACPI device, IDs ETD0504 PNP0f0b PNP0f12 PNP0f03 PNP0f0e PNP0f13 (active) [ 0.233190] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.233193] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.233196] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.233199] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.233202] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.233204] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.233207] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.233210] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.233213] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.233216] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.233219] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.233567] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved [ 0.233570] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved [ 0.233574] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.233596] pnp: PnP ACPI: found 11 devices [ 0.233597] ACPI: bus type PNP unregistered [ 0.240301] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.240335] pci 0000:00:1c.5: BAR 15: assigned [mem 0xafb00000-0xafbfffff pref] [ 0.240338] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.240358] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb0ffff pref] [ 0.240361] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.240368] pci 0000:00:1c.5: bridge window [mem 0xc0400000-0xc04fffff] [ 0.240374] pci 0000:00:1c.5: bridge window [mem 0xafb00000-0xafbfffff pref] [ 0.240385] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.240387] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.240390] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.240392] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.240395] pci_bus 0000:02: resource 1 [mem 0xc0400000-0xc04fffff] [ 0.240397] pci_bus 0000:02: resource 2 [mem 0xafb00000-0xafbfffff pref] [ 0.240468] NET: Registered protocol family 2 [ 0.240712] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.240825] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.240933] TCP: Hash tables configured (established 32768 bind 32768) [ 0.240956] TCP: reno registered [ 0.240967] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.240991] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.241091] NET: Registered protocol family 1 [ 0.241105] pci 0000:00:02.0: Boot video device [ 0.270728] PCI: CLS 64 bytes, default 64 [ 0.270782] Unpacking initramfs... [ 0.638448] Freeing initrd memory: 14492K (ffff8800363a2000 - ffff8800371c9000) [ 0.638462] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.638465] software IO TLB [mem 0xa0571000-0xa4571000] (64MB) mapped at [ffff8800a0571000-ffff8800a4570fff] [ 0.638500] Simple Boot Flag at 0x44 set to 0x1 [ 0.638730] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23 [ 0.638739] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23 [ 0.638794] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23 [ 0.638804] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23 [ 0.638867] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 0.639195] audit: initializing netlink socket (disabled) [ 0.639209] type=2000 audit(1398762879.624:1): initialized [ 0.657359] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.657850] VFS: Disk quotas dquot_6.5.2 [ 0.657882] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657976] msgmni has been set to 7626 [ 0.658327] alg: No test for stdrng (krng) [ 0.658355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.658399] io scheduler noop registered [ 0.658401] io scheduler deadline registered [ 0.658422] io scheduler cfq registered (default) [ 0.658868] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.658885] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.658920] intel_idle: MWAIT substates: 0x21120 [ 0.658922] intel_idle: v0.4 model 0x2A [ 0.658923] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.659069] GHES: HEST is not enabled! [ 0.659127] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.659593] Linux agpgart interface v0.103 [ 0.659690] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.662414] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.662420] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.662545] mousedev: PS/2 mouse device common for all mice [ 0.662588] rtc_cmos 00:05: RTC can wake from S4 [ 0.662724] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.662765] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.662776] Intel P-state driver initializing. [ 0.662788] Intel pstate controlling: cpu 0 [ 0.662804] Intel pstate controlling: cpu 1 [ 0.662823] Intel pstate controlling: cpu 2 [ 0.662835] Intel pstate controlling: cpu 3 [ 0.662862] AMD IOMMUv2 driver by Joerg Roedel <joerg.roe...@amd.com> [ 0.662863] AMD IOMMUv2 functionality not available on this system [ 0.662979] TCP: cubic registered [ 0.663056] NET: Registered protocol family 10 [ 0.663275] mip6: Mobile IPv6 [ 0.663278] NET: Registered protocol family 17 [ 0.663281] mpls_gso: MPLS GSO support [ 0.663548] registered taskstats version 1 [ 0.664069] rtc_cmos 00:05: setting system clock to 2014-04-29 09:14:40 UTC (1398762880) [ 0.664118] PM: Hibernation image not present or could not be loaded. [ 0.664887] Freeing unused kernel memory: 984K (ffffffff818af000 - ffffffff819a5000) [ 0.664889] Write protecting the kernel read-only data: 8192k [ 0.669010] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000) [ 0.670307] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) [ 0.679624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.746848] systemd-udevd[69]: starting version 204 [ 0.766492] ACPI: bus type USB registered [ 0.766525] usbcore: registered new interface driver usbfs [ 0.766538] usbcore: registered new interface driver hub [ 0.768237] usbcore: registered new device driver usb [ 0.768752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.769061] ehci-pci: EHCI PCI platform driver [ 0.769232] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.769242] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.769260] ehci-pci 0000:00:1a.0: debug port 2 [ 0.773173] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.773361] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0509000 [ 0.776076] SCSI subsystem initialized [ 0.777377] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.777381] ACPI: Thermal Zone [TZS0] (51 C) [ 0.777615] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.777618] ACPI: Thermal Zone [TZS1] (38 C) [ 0.779268] libata version 3.00 loaded. [ 0.782864] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.782916] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.782920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.782922] usb usb1: Product: EHCI Host Controller [ 0.782925] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 0.782927] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.783105] hub 1-0:1.0: USB hub found [ 0.783117] hub 1-0:1.0: 2 ports detected [ 0.783401] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.783408] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.783426] ehci-pci 0000:00:1d.0: debug port 2 [ 0.787337] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.787365] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0508000 [ 0.788951] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 0.792378] alg: No test for crc32 (crc32-pclmul) [ 0.798845] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.798944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.798947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.798949] usb usb2: Product: EHCI Host Controller [ 0.798950] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd [ 0.798952] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.799071] hub 2-0:1.0: USB hub found [ 0.799146] hub 2-0:1.0: 2 ports detected [ 0.799269] ahci 0000:00:1f.2: version 3.0 [ 0.799435] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 0.799466] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.814871] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.814875] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 0.839622] scsi0 : ahci [ 0.839804] scsi1 : ahci [ 0.839918] scsi2 : ahci [ 0.840033] scsi3 : ahci [ 0.840148] scsi4 : ahci [ 0.840260] scsi5 : ahci [ 0.840313] ata1: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507100 irq 42 [ 0.840317] ata2: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507180 irq 42 [ 0.840319] ata3: DUMMY [ 0.840322] ata4: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507280 irq 42 [ 0.840325] ata5: SATA max UDMA/133 abar m2048@0xc0507000 port 0xc0507300 irq 42 [ 0.840327] ata6: DUMMY [ 1.095161] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.159115] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.161173] ata1.00: supports DRM functions and may not be fully accessible [ 1.161246] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.161251] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133 [ 1.161255] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.161532] ata1.00: supports DRM functions and may not be fully accessible [ 1.161604] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.161611] ata1.00: configured for UDMA/133 [ 1.162015] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 [ 1.227838] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.227846] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.228379] hub 1-1:1.0: USB hub found [ 1.228583] hub 1-1:1.0: 6 ports detected [ 1.339265] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.471754] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.471763] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.472185] hub 2-1:1.0: USB hub found [ 1.472408] hub 2-1:1.0: 8 ports detected [ 1.543477] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 1.635330] tsc: Refined TSC clocksource calibration: 1696.147 MHz [ 1.637925] usb 1-1.4: New USB device found, idVendor=04ca, idProduct=3004 [ 1.637933] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.637938] usb 1-1.4: Product: Bluetooth USB Host Controller [ 1.637942] usb 1-1.4: Manufacturer: Atheros Communications [ 1.637946] usb 1-1.4: SerialNumber: Alaska Day 2006 [ 1.711561] usb 1-1.5: new high-speed USB device number 4 using ehci-pci [ 2.111417] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=2c00 [ 2.111448] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.111453] usb 1-1.5: Product: 1.3M HD WebCam [ 2.111456] usb 1-1.5: Manufacturer: C8BAF0ET2 [ 2.399858] usb 2-1.6: new high-speed USB device number 3 using ehci-pci [ 2.493347] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0129 [ 2.493356] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.493361] usb 2-1.6: Product: USB2.0-CRW [ 2.493365] usb 2-1.6: Manufacturer: Generic [ 2.493369] usb 2-1.6: SerialNumber: 20100201396000000 [ 2.636016] Switched to clocksource tsc [ 6.521569] ata2: link is slow to respond, please be patient (ready=0) [ 9.226674] usb 1-1.4: USB disconnect, device number 3 [ 11.171719] ata2: COMRESET failed (errno=-16) [ 16.534188] ata2: link is slow to respond, please be patient (ready=0) [ 21.184350] ata2: COMRESET failed (errno=-16) [ 26.546810] ata2: link is slow to respond, please be patient (ready=0) [ 33.268714] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 33.268878] sd 0:0:0:0: [sda] Write Protect is off [ 33.268884] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 33.268951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.271301] sda: sda1 sda2 sda3 < sda5 > [ 33.271956] sd 0:0:0:0: [sda] Attached SCSI disk [ 56.240513] ata2: COMRESET failed (errno=-16) [ 56.240586] ata2: limiting SATA link speed to 1.5 Gbps [ 61.266834] ata2: COMRESET failed (errno=-16) [ 61.266906] ata2: reset failed, giving up [ 61.586996] ata4: SATA link down (SStatus 0 SControl 300) [ 61.907160] ata5: SATA link down (SStatus 0 SControl 300) [ 61.910248] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 61.948608] device-mapper: uevent: version 1.0.3 [ 61.948692] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-de...@redhat.com [ 61.952909] random: lvm urandom read with 33 bits of entropy available [ 83.120313] random: nonblocking pool is initialized [ 147.171055] bio: create slab <bio-1> at 1 [ 163.768531] bio: create slab <bio-1> at 1 [ 163.890466] bio: create slab <bio-1> at 1 [ 163.959600] PM: Starting manual resume from disk [ 163.959604] PM: Hibernation image partition 254:3 present [ 163.959605] PM: Looking for hibernation image. [ 163.959799] PM: Image not found (code -22) [ 163.959800] PM: Hibernation image not present or could not be loaded. [ 163.965005] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 163.965009] EXT4-fs (dm-1): write access will be enabled during recovery [ 164.037823] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 164.038019] EXT4-fs (dm-1): 1 orphan inode deleted [ 164.038022] EXT4-fs (dm-1): recovery complete [ 164.059945] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 164.204199] systemd-udevd[469]: starting version 204 [ 164.268991] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 164.268998] ACPI: Sleep Button [SLPB] [ 164.269037] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 164.269146] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X [ 164.278128] [drm] Initialized drm 1.1.0 20060810 [ 164.288597] ACPI: Lid Switch [LID0] [ 164.288676] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 164.288681] ACPI: Power Button [PWRF] [ 164.288755] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 164.289544] wmi: Mapper loaded [ 164.289688] ACPI: Battery Slot [BAT0] (battery present) [ 164.303472] ACPI: AC Adapter [ADP1] (off-line) [ 164.308107] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 164.319495] cfg80211: Calling CRDA to update world regulatory domain [ 164.339856] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 164.340020] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 164.341622] [drm] Memory usable by graphics device = 2048M [ 164.349580] acer_wmi: Acer Laptop ACPI-WMI Extras [ 164.349601] acer_wmi: Function bitmap for Communication Button: 0x801 [ 164.351157] ath: phy0: ASPM enabled: 0x43 [ 164.351160] ath: EEPROM regdomain: 0x65 [ 164.351162] ath: EEPROM indicates we should expect a direct regpair map [ 164.351164] ath: Country alpha2 being used: 00 [ 164.351165] ath: Regpair used: 0x65 [ 164.354720] media: Linux media interface: v0.10 [ 164.357297] Linux video capture interface: v2.00 [ 164.362250] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (1bcf:2c00) [ 164.362303] rts5139: module is from the staging directory, the quality is unknown, you have been warned. [ 164.363385] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 164.363623] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010d80000, irq=17 [ 164.368047] scsi6 : SCSI emulation for RTS5139 USB card reader [ 164.368582] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 164.369648] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 164.369999] usbcore: registered new interface driver rts5139 [ 164.384121] acer_wmi: Disabling ACPI video driver [ 164.386088] input: Acer WMI hotkeys as /devices/virtual/input/input9 [ 164.387307] input: Acer BMA150 accelerometer as /devices/virtual/input/input10 [ 164.402797] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 164.402814] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 164.402816] [drm] Driver supports precise vblank timestamp query. [ 164.402889] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 164.419612] cfg80211: World regulatory domain updated: [ 164.419617] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 164.419620] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 164.419622] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 164.419624] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 164.419627] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 164.419629] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 164.419630] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 164.430614] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 164.430617] [drm] This can cause pipe underruns and display issues. [ 164.430618] [drm] Please upgrade your BIOS to fix this. [ 164.447940] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 164.448207] fbcon: inteldrmfb (fb0) is primary device [ 164.448789] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11 [ 164.448862] usbcore: registered new interface driver uvcvideo [ 164.448862] USB Video Class driver (1.1.1) [ 165.170325] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00) [ 165.182813] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x13, 0x0e. [ 165.244798] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 165.364172] Console: switching to colour frame buffer device 170x48 [ 165.368735] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 165.368738] i915 0000:00:02.0: registered panic notifier [ 165.391901] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 165.392033] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 165.392191] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 165.392278] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 165.392290] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 165.392296] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 165.392302] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 165.392305] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 165.392311] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 165.392313] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 165.392318] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 165.392321] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 165.392514] ACPI Warning: 0x0000000000002040-0x000000000000205f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251) [ 165.392526] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 165.397609] iTCO_vendor_support: vendor-support=0 [ 165.398072] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 165.398108] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 165.398246] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 165.569256] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 165.598001] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 165.907289] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 193.067793] lp: driver loaded but no devices found [ 193.072842] ppdev: user-space parallel port driver [ 193.083317] loop: module loaded [ 193.090982] fuse init (API version 7.22) [ 193.318392] Adding 8249340k swap on /dev/mapper/g0-swap. Priority:-1 extents:1 across:8249340k SS [ 193.395292] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 193.396134] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 193.399989] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 193.403583] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 193.595082] RPC: Registered named UNIX socket transport module. [ 193.595086] RPC: Registered udp transport module. [ 193.595087] RPC: Registered tcp transport module. [ 193.595088] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 193.597567] FS-Cache: Loaded [ 193.602790] FS-Cache: Netfs 'nfs' registered for caching [ 193.608543] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 193.976435] Bluetooth: Core ver 2.17 [ 193.976456] NET: Registered protocol family 31 [ 193.976458] Bluetooth: HCI device and connection manager initialized [ 193.976468] Bluetooth: HCI socket layer initialized [ 193.976471] Bluetooth: L2CAP socket layer initialized [ 193.976476] Bluetooth: SCO socket layer initialized [ 193.982176] Bluetooth: RFCOMM TTY layer initialized [ 193.982189] Bluetooth: RFCOMM socket layer initialized [ 193.982195] Bluetooth: RFCOMM ver 1.11 [ 193.983272] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 193.983276] Bluetooth: BNEP filters: protocol multicast [ 193.983284] Bluetooth: BNEP socket layer initialized [ 194.097913] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 194.508418] systemd-logind[3043]: New seat seat0. [ 194.509026] systemd-logind[3043]: Watching system buttons on /dev/input/event3 (Power Button) [ 194.509096] systemd-logind[3043]: Watching system buttons on /dev/input/event11 (Video Bus) [ 194.509158] systemd-logind[3043]: Watching system buttons on /dev/input/event2 (Lid Switch) [ 194.509219] systemd-logind[3043]: Watching system buttons on /dev/input/event1 (Sleep Button) [ 194.509910] systemd-logind[3043]: New session c1 of user lightdm. [ 194.509999] systemd-logind[3043]: Linked /tmp/.X11-unix/X0 to /run/user/110/X11-display. [ 194.810913] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 [ 195.886457] wlan0: authenticate with 00:1e:e5:84:fa:cf [ 195.910356] wlan0: send auth to 00:1e:e5:84:fa:cf (try 1/3) [ 195.912544] wlan0: authenticated [ 195.912898] wlan0: associate with 00:1e:e5:84:fa:cf (try 1/3) [ 195.917003] wlan0: RX AssocResp from 00:1e:e5:84:fa:cf (capab=0x411 status=0 aid=2) [ 195.917063] wlan0: associated [ 195.917075] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 203.107482] systemd-logind[3043]: New session 1 of user mehdi. [ 203.107588] systemd-logind[3043]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
-- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
