Hi, On Sun, Apr 27, 2014 at 8:46 AM, gpe <gp...@free.fr> wrote: > Le Tue, 22 Apr 2014 20:09:28 -0300 > Felipe Sateler <fsate...@debian.org> a écrit: > >> Hi, >> >> On Sun, Apr 20, 2014 at 8:00 PM, gpe92 <gp...@free.fr> wrote: >> > Package: pulseaudio >> > Version: 5.0-2 >> > Severity: normal >> > >> > Dear Maintainer, >> > >> > After updating PA to version 5.0-2 I've lost my sound. So I've >> > checked my connections and I've saw that my speakers were connected to >> > "rear speaker out" (black connector) instead of "port line out" >> > (green connector). Then I've connected the speakers at the green >> > connector and the sound is ok now. >> > So it seems that there is a problem with the connections >> > autodetection in PA5 because with PA4 and the speakers connected on >> > the black connector, there was any problem. >> >> please run the following: >> >> pulseaudio -k ; pulseaudio -vvvv --log-target=file:pa.log --log-time >> >> If the command exits immediately, please retry a few times until the >> command stays running. >> >> After that, please try changing the speaker plug back and forth >> between the different connectors. >> >> Does pulseaudio pick up the change automatically? If so, then I'd say >> there is no problem ;). Maybe a one-time fluke? > > No it doesn't work. Here is the pa.log file. I've switched between the green > and black connectors. > >> >> If not, please attach the pa.log file, and also the output of the command: >> >> pactl list sinks >> >> Please Run that command once for each connector you can plug your speakers >> to. > > Here is the 2 log file for the green and the black connectors > (pa_list_sink_green.log and pa_list_sinks_black.log)
I'm going out on a limb here, not sure if this will work: It looks like your pulseaudio is configured as stereo instead of surround, which may be disabling the surround jack. Please try opening pavucontrol and on the Configuration tab change the profile of the built in card (should be the second one as the first is the hdmi port). -- Saludos, Felipe Sateler -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
