Package: libifd-cyberjack6
Version: 3.99.5final.SP03
Severity: important
Dear Maintainer,
My card reader (Cyber Jack eCom by the company ReinerSCT) no longer works
with HBCI Banking Software Hibiscus.
Here to reach the error message when trying my bank via HBCI in Hibiscus.
[24.04.2014 19:11:47] Teste Sicherheits-Medium...
[24.04.2014 19:11:47] Fehler beim Testen des Sicherheits-Mediums: Kein
Kartenleser gefunden
[24.04.2014 19:11:47] Aufgetretene Fehlermeldungen:
[24.04.2014 19:11:47] -----------------------------
[24.04.2014 19:11:47] error while opening chipcard; nested exception is:
[24.04.2014 19:11:47] Kein Kartenleser gefunden
[24.04.2014 19:11:47] Kein Kartenleser gefunden
[24.04.2014 19:11:47] -----------------------------
By installing the previous version 3.99.5final.SP03 the card reader worked
correctly again and Hibiscus has been detected. Here, the data of the card
reader of "lsusb"
# lsusb -s 001:005 -v
Bus 001 Device 005: ID 0c4b:0400 Reiner SCT Kartensysteme GmbH
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0c4b Reiner SCT Kartensysteme GmbH
idProduct 0x0400
bcdDevice 0.01
iManufacturer 1 Reiner-SCT
iProduct 2 cyberJack e-com(a)
iSerial 3 0679700133
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
DEVICE CLASS: 36 21 00 10 00 07 03 00 00 00 a0 0f 00 00 40 1f 00 00 00
58 27 00 00 90 d0 03 00 00 fe 00 00 00 07 00 00 00 00 00 00 00 30 00 01 00 0e
01 00 00 ff ff 00 00 03 01
Device Status: 0x0000
(Bus Powered)
Regards
Michael Singer
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.14-1.towo-siduction-amd64 (SMP w/8 CPU cores; PREEMPT)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages libifd-cyberjack6 depends on:
ii libc6 2.18-4
ii libgcc1 1:4.9-20140411-2
ii libpcsclite1 1.8.11-1
ii libstdc++6 4.9-20140411-2
ii libusb-1.0-0 2:1.0.18-2
ii pcscd 1.8.11-1
libifd-cyberjack6 recommends no packages.
Versions of packages libifd-cyberjack6 suggests:
ii pcsc-tools 1.4.22-1
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
