-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i386-netinst.iso uname -a: Linux hades 2.6.8-2-686 #1 Mon Jan 24 03:58:38 EST 2005 i686 GNU/Linux Date: Tue Aug 2 16:26:21 CEST 2005 Method: netinstall cd, apt source than from ftp.de.debian.org via a squid proxy Machine: Maxdata Platinum Entry Server Processor: P4 Memory: 512 Root Device: 3ware 7006-2 controller with 2 ide 160 as (hardware) raid 0 Root Size/partition table: Device Boot Start End Blocks Id System /dev/sda1 1 249 2000061 82 Linux swap /dev/sda2 * 250 1494 10000462+ 83 Linux /dev/sda3 1495 19457 144287797+ 83 Linux /dev/sda2 on / type ext3 (rw,errors=remount-ro) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sda3 on /data type ext3 (rw) usbfs on /proc/bus/usb type usbfs (rw) Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) 0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 0000:02:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet Controller (LOM) 0000:03:02.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01) 0000:03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 0000:03:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 01) 0000:00:00.0 0600: 8086:2578 (rev 02) 0000:00:01.0 0604: 8086:2579 (rev 02) 0000:00:03.0 0604: 8086:257b (rev 02) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.3 0c03: 8086:24de (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.1 0101: 8086:24db (rev 02) 0000:00:1f.2 0101: 8086:24d1 (rev 02) 0000:00:1f.3 0c05: 8086:24d3 (rev 02) 0000:02:01.0 0200: 8086:1019 0000:03:02.0 0104: 13c1:1001 (rev 01) 0000:03:06.0 0300: 1002:4752 (rev 27) 0000:03:08.0 0200: 8086:1050 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: worked all out of the box, didn't though its that easy. really a good installer! the only problem I had was to understand the partition window. the system was pre-configured with some fat32/ntfs partions and I wanted to remove all and start from scratch. I switched onto the second shell (alt-f2) and used cfdisk. a problem for beginner users will be that the devices are not accessable in the" normal way" (in my case: /dev/sda) during the install -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCCN1p8tTsQqJDUBMRArPsAJwLRG7tdM4DZyTRlLcc+oBJ4/5cvwCeIHRT e/t1PNqEy1WUwzV1J2d68LE= =gRgC -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
