Package: udev Version: 0.074-2 Severity: normal
Ciao, After the switch to a recent release of udev, I have some problems with my Synaptics Touchpad. It is handled by the psmouse module but the "special features" of a synaptics device is detected at runtime. The problem is that psmouse is loaded too early by recent udev, more specifically: it is loaded BEFORE the loading of usb-stuff. This is known issue of psmouse module: http://www.ussg.iu.edu/hypermail/linux/kernel/0407.1/0862.html My Xserver doesn't start if the touchpad is detect as a simple mouse (it is configured as a synaptics device in xorg.conf). If I remove the module ('rmmod psmouse') and then I load it ('modprobe psmouse'), and I restart X: it works. This happens only if at boot-time I have my usb-mouse plugged. In a "bad run" lsmod reports (psmouse is loaded before usbcore): ........... soundcore 8288 1 snd shpchp 96612 0 ehci_hcd 31624 0 intel_agp 21276 1 uhci_hcd 31888 0 snd_page_alloc 8712 3 snd_intel8x0m,snd_intel8x0,snd_pcm i2c_i801 7948 0 pci_hotplug 12036 1 shpchp mousedev 10272 0 usbcore 115840 5 usbhid,hci_usb,ehci_hcd,uhci_hcd psmouse 37380 0 i2c_core 18576 1 i2c_i801 agpgart 29768 1 intel_agp rtc 11320 0 To delay the loading of psmouse I've added it in a file of /etc/hotplug/blacklist.d/ (this folder it is still working) and in /etc/modules. In this way, the output of lsmod is: ieee80211_crypt_tkip 10240 3 rfcomm 37404 2 l2cap 24196 5 rfcomm vmnet 27684 0 vmmon 173100 0 ipt_ULOG 6660 1 ip_tables 20736 1 ipt_ULOG pcmcia 33828 2 nls_iso8859_1 3968 1 nls_cp437 5632 1 psmouse 37380 0 eth1394 18440 0 hci_usb 14224 2 bluetooth 44932 7 rfcomm,l2cap,hci_usb usbhid 36960 0 evdev 7808 1 ohci1394 33332 0 8139cp 17920 0 ieee1394 91576 2 eth1394,ohci1394 snd_intel8x0 31200 0 snd_intel8x0m 15812 0 snd_ac97_codec 95484 2 snd_intel8x0,snd_intel8x0m snd_ac97_bus 2048 1 snd_ac97_codec yenta_socket 25100 2 rsrc_nonstatic 12160 1 yenta_socket pcmcia_core 37776 3 pcmcia,yenta_socket,rsrc_nonstatic ipw2200 184256 0 snd_pcm_oss 51232 0 snd_mixer_oss 17920 1 snd_pcm_oss 8139too 23040 0 mii 4864 2 8139cp,8139too ieee80211 46312 1 ipw2200 ieee80211_crypt 5380 2 ieee80211_crypt_tkip,ieee80211 snd_pcm 85640 4 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss snd_timer 22660 1 snd_pcm snd 49380 7 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 8288 1 snd uhci_hcd 31888 0 ehci_hcd 31624 0 i2c_i801 7948 0 snd_page_alloc 8712 3 snd_intel8x0,snd_intel8x0m,snd_pcm intel_agp 21276 1 agpgart 29768 2 intel_agp shpchp 96612 0 pci_hotplug 12036 1 shpchp mousedev 10272 1 usbcore 115840 5 hci_usb,usbhid,uhci_hcd,ehci_hcd i2c_core 18576 1 i2c_i801 rtc 11320 0 Another strange behaviour is: during the boot I can see strange messages (not always the same!) about unresolved symbols as you can see from the following dmesg output. The modules that create these messages are later loaded without any problem. :| It looks as something (udev?) is trying to load a module with an insmod (instead of modprobe). Kernel command line: root=/dev/hda5 ro noapic resume2=swap:/dev/hda7 vga=791 splash=silente,theme:current CONSOLE=/dev/tty1 SELINUX_INIT=NO Initializing CPU#0 CPU 0 irqstacks, hard=c043c000 soft=c043b000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1696.021 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 905004k/917504k available (2410k kernel code, 11868k reserved, 691k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3394.43 BogoMIPS (lpj=6788862) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0c38) checking if image is initramfs... it is Freeing initrd memory: 328k freed softlockup thread 0 started up. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs *4) ACPI: PCI Interrupt Link [LNKD] (IRQs *3) ACPI: PCI Interrupt Link [LNKE] (IRQs *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *4) ACPI: PCI Interrupt Link [LNKH] (IRQs *3) ACPI: Embedded Controller [H_EC] (gpe 29) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 6 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 3, cardbus bridge: 0000:02:09.0 IO window: 00003400-000034ff IO window: 00003800-000038ff PREFETCH window: 50000000-51ffffff MEM window: 54000000-55ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: e0200000-e02fffff PREFETCH window: 50000000-51ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 Simple Boot Flag at 0x36 set to 0x1 Initializing Cryptographic API vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 3072k, total 32576k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 128x48 fbsplash: console 0 using theme 'current' fbsplash: switched splash state to 'on' on console 0 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ACAD] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Thermal Zone [THRM] (67 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:1f.6 disabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST9100823A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PIONEER DVD-RW DVR-K14, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 hdaps: supported laptop not found! hdaps: driver init failed (ret=-6)! NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 input: AT Translated Set 2 keyboard on isa0060/serio0 Using IPI Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. ACPI wakeup devices: PCIB LAN PS2K PSM1 USB0 USB1 USB2 USB7 ACPI: (supports S0 S3 S4 S5) Suspend2 2.2-rc9: Swapwriter: Signature found. Suspend2 2.2-rc9: Suspending enabled. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 180k freed kjournald starting. Commit interval 5 seconds Real Time Clock Driver v1.12 usbcore: registered new driver usbfs usbcore: registered new driver hub mice: PS/2 mouse device common for all mice pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 uhci_hcd: Unknown symbol usb_hcd_pci_suspend uhci_hcd: Unknown symbol usb_hcd_resume_root_hub uhci_hcd: Unknown symbol usb_hcd_pci_probe uhci_hcd: Unknown symbol usb_check_bandwidth uhci_hcd: Unknown symbol usb_disabled uhci_hcd: Unknown symbol usb_release_bandwidth uhci_hcd: Unknown symbol usb_claim_bandwidth uhci_hcd: Unknown symbol usb_hcd_pci_resume uhci_hcd: Unknown symbol usb_hcd_giveback_urb uhci_hcd: Unknown symbol usb_hcd_poll_rh_status uhci_hcd: Unknown symbol usb_hcd_pci_remove Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Detected 32636K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 USB Universal Host Controller Interface driver v2.3 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 3, io mem 0xe0100000 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, 1.1.6 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected 8139too Fast Ethernet driver 0.9.27 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 3, io base 0x00001840 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 4, io base 0x00001860 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.6 to 64 eth0: RealTek RTL8139 at 0x3000, 00:c0:9f:71:7b:6a, IRQ 10 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ieee1394: Initialized config rom entry `ip1394' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) usb 3-1: new low speed USB device using uhci_hcd and address 2 MC'97 0 converters and GPIO not ready (0x1) intel8x0_measure_ac97_clock: measured 132160 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:09.0 [103c:3080] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:09.0, mfunc 0x01a01b22, devctl 0x64 Yenta: ISA IRQ mask 0x00c0, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff cs: IO port probe 0x3000-0x3fff: clean. pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]> ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 4 ACPI: PCI Interrupt 0000:02:09.2[C] -> Link [LNKG] -> GSI 4 (level, low) -> IRQ 4 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[4] MMIO=[e0207000-e02077ff] Max Packet=[2048] usb 4-2: new full speed USB device using uhci_hcd and address 2 usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Darfon USB Mouse] on usb-0000:00:1d.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new driver hci_usb ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000363866] eth1394: $Rev: 1312 $ Ben Collins <[EMAIL PROTECTED]> eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Adding 875500k swap on /dev/hda7. Priority:-1 extents:1 across:875500k EXT3 FS on hda5, internal journal Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0 input: SynPS/2 Synaptics TouchPad on isa0060/serio1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. eth0: link down ip_tables: (C) 2000-2002 Netfilter core team vmmon: module license 'unspecified' taints kernel. /dev/vmmon[5293]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[5293]: Module vmmon: initialized Bluetooth: L2CAP ver 2.7 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.5 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized fbsplash: console 1 using theme 'current' fbsplash: switched splash state to 'on' on console 1 fbsplash: console 2 using theme 'current' fbsplash: switched splash state to 'on' on console 2 fbsplash: console 3 using theme 'current' fbsplash: switched splash state to 'on' on console 3 fbsplash: console 4 using theme 'current' fbsplash: switched splash state to 'on' on console 4 fbsplash: console 5 using theme 'current' fbsplash: switched splash state to 'on' on console 5 fbsplash: console 6 using theme 'current' fbsplash: switched splash state to 'on' on console 6 fbsplash: console 7 using theme 'current' fbsplash: switched splash state to 'on' on console 7 ieee80211_crypt: registered algorithm 'TKIP' mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000 ipw2200: Unknown notification: subtype=40,flags=0xa0,size=40 -- Package-specific info: -- /etc/udev/rules.d/: /etc/udev/rules.d/: totale 0 lrwxrwxrwx 1 root root 20 2005-11-11 11:04 020_permissions.rules -> ../permissions.rules lrwxrwxrwx 1 root root 19 2005-10-26 08:27 025_libgphoto2.rules -> ../libgphoto2.rules lrwxrwxrwx 1 root root 16 2005-10-11 12:07 025_libsane.rules -> ../libsane.rules lrwxrwxrwx 1 root root 12 2005-10-30 10:38 050_hal-plugdev.rules -> ../hal.rules lrwxrwxrwx 1 root root 19 2005-11-11 11:04 cd-aliases.rules -> ../cd-aliases.rules lrwxrwxrwx 1 root root 13 2005-11-11 11:04 udev.rules -> ../udev.rules lrwxrwxrwx 1 root root 19 2005-11-11 11:04 z20_persistent.rules -> ../persistent.rules lrwxrwxrwx 1 root root 12 2005-11-11 11:04 z50_run.rules -> ../run.rules lrwxrwxrwx 1 root root 16 2005-11-11 11:04 z55_hotplug.rules -> ../hotplug.rules lrwxrwxrwx 1 root root 19 2005-09-13 19:46 z60_alsa-utils.rules -> ../alsa-utils.rules lrwxrwxrwx 1 root root 17 2005-11-11 11:04 z70_hotplugd.rules -> ../hotplugd.rules -- /sys/: /sys/block/hda/dev /sys/block/hda/hda1/dev /sys/block/hda/hda2/dev /sys/block/hda/hda3/dev /sys/block/hda/hda4/dev /sys/block/hda/hda5/dev /sys/block/hda/hda6/dev /sys/block/hda/hda7/dev /sys/block/hdc/dev /sys/block/loop0/dev /sys/block/loop1/dev /sys/block/loop2/dev /sys/block/loop3/dev /sys/block/loop4/dev /sys/block/loop5/dev /sys/block/loop6/dev /sys/block/loop7/dev /sys/block/ram0/dev /sys/block/ram10/dev /sys/block/ram11/dev /sys/block/ram12/dev /sys/block/ram13/dev /sys/block/ram14/dev /sys/block/ram15/dev /sys/block/ram1/dev /sys/block/ram2/dev /sys/block/ram3/dev /sys/block/ram4/dev /sys/block/ram5/dev /sys/block/ram6/dev /sys/block/ram7/dev /sys/block/ram8/dev /sys/block/ram9/dev /sys/class/graphics/fb0/dev /sys/class/input/event0/dev /sys/class/input/event1/dev /sys/class/input/event2/dev /sys/class/input/mice/dev /sys/class/input/mouse0/dev /sys/class/input/mouse1/dev /sys/class/misc/agpgart/dev /sys/class/misc/fbsplash/dev /sys/class/misc/psaux/dev /sys/class/misc/rtc/dev /sys/class/misc/vmmon/dev /sys/class/sound/adsp/dev /sys/class/sound/audio1/dev /sys/class/sound/audio/dev /sys/class/sound/controlC0/dev /sys/class/sound/controlC1/dev /sys/class/sound/dsp1/dev /sys/class/sound/dsp/dev /sys/class/sound/mixer1/dev /sys/class/sound/mixer/dev /sys/class/sound/pcmC0D0c/dev /sys/class/sound/pcmC0D0p/dev /sys/class/sound/pcmC0D1c/dev /sys/class/sound/pcmC0D2c/dev /sys/class/sound/pcmC0D3c/dev /sys/class/sound/pcmC0D4p/dev /sys/class/sound/pcmC1D0c/dev /sys/class/sound/pcmC1D0p/dev /sys/class/sound/timer/dev /sys/class/usb_device/usbdev1.1/dev /sys/class/usb_device/usbdev2.1/dev /sys/class/usb_device/usbdev3.1/dev /sys/class/usb_device/usbdev3.2/dev /sys/class/usb_device/usbdev4.1/dev /sys/class/usb_device/usbdev4.2/dev -- Kernel configuration: -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14-lgls Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages udev depends on: ii initscripts 2.86.ds1-4 Standard scripts needed for bootin ii libc6 2.3.5-6 GNU C Library: Shared libraries an ii libselinux1 1.26-1 SELinux shared libraries ii libsepol1 1.8-1 Security Enhanced Linux policy lib ii lsb-base 3.0-11 Linux Standard Base 3.0 init scrip ii makedev 2.3.1-78 creates device files in /dev ii sed 4.1.2-8 The GNU sed stream editor udev recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
