Package: hplip-gui Version: 3.13.11-2 Severity: important Dear Maintainer,
I installed the hplip-gui package on a fresh Debian Jessie install to make available the HP Toolbox for easy HP printers installation and management (in particular networked multi-function printing/scanning). This installation has the root account disabled by specifying an empty password during the initial installation. After launching hp-toolbox from command line (it can't be found from the Activites Overview, reported as Bug #733947), I proceed to networked printer detection which goes on as expected until reaching the Setup Device dialog and confirming the printer addition by clicking on the Add Printer button. At that point a dialog appears: You do not have permission to add a printer. You need authentication. My standard credentials don't work as expected, an error dialog indicates: Could not connect to CUPS Server due to insufficient privileges. Try with a valid user. I would expect HP Toolbox to be usable even when the root account is disabled, as the initial user in a vanilla install has admin privileges. As a workaround, a networked printer can be installed using the standard printing configuration utility, but network scanning and other advanced features won't be configured. This effectively makes it harder to properly configure such networked multifunction devices. I believe the same bug has been reported in Ubuntu: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1209246 -- Package-specific info: Saving output in log file: /home/magicfab/hp-check.log HP Linux Imaging and Printing System (ver. 3.13.11) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: debian-unstable version is not supported. Using debian-7.2 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 3.11-2-amd64 #1 SMP Debian 3.11.10-1 (2013-12-04) GNU/Linux Host: ARA-salon Proc: 3.11-2-amd64 #1 SMP Debian 3.11.10-1 (2013-12-04) GNU/Linux Distribution: debian unstable Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.13.11 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for debian distro unstable version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.13.11 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML html=/usr/share/doc/hplip-3.13.11 icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.13.11 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes lite-build=no udev-acl-rules=yes udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: [installation] date_time = 01/02/14 09:51:01 version = 3.13.11 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> -------------------------- | External Dependencies | -------------------------- policykit Admin-Policy-framework OPTIONAL - 0.105 OK - gs Ghostscript REQUIRED 7.05 9.05 OK - network Network-wget OPTIONAL - 1.14 OK - scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK - error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed' error: dbus DBus REQUIRED - 1.6.18 MISSING 'DBUS may not be installed or not running' error: cups CUPS REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' error: xsane SANE-GUI OPTIONAL 0.9 - MISSING 'xsane needs to be installed' ------------------------- | General Dependencies | ------------------------- reportlab Python-PDF-Lib OPTIONAL 2.0 2.7 OK - error: libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 MISSING 'libcrypto needs to be installed' pil Python-Image-Lib OPTIONAL - 1.1.7 OK - pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.10.3 OK - error: libjpeg JPEG-Lib REQUIRED - - MISSING 'libjpeg needs to be installed' libpthread POSIX-Threads-Lib REQUIRED - 2.17 OK - python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK - error: python-devel Python-SDK REQUIRED 2.2 2.7.6 MISSING 'python-devel needs to be installed' pyqt4 Python-Qt4 REQUIRED 4.0 4.10.3 OK - error: cups-devel CUPS-SDK REQUIRED - - MISSING 'cups-devel needs to be installed' error: sane-devel SANE-SDK REQUIRED - - MISSING 'sane-devel needs to be installed' error: libusb USB-Lib REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane Scan-Lib REQUIRED - - OK - error: cups-image CUPS-Image-Lib REQUIRED - - MISSING 'cups-image needs to be installed' error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' python-xml Python-XML-Lib REQUIRED - 2.1.0 OK - python-notify Desktop-notifications OPTIONAL - - OK - ---------------------- | Python Extentions | ---------------------- cupsext CUPS-Extension REQUIRED - 3.13.11 OK - pcardext PhotoCard-Extension REQUIRED - 3.13.11 OK - hpmudext IO-Extension REQUIRED - 3.13.11 OK - ----------------------- | Scan Configuration | ----------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.13.11 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.13.11 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ No Scanner found. -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- lpstat ------ Type: Unknown Device URI: No destinations added. -------------- | PERMISSION | -------------- ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'libdbus-1-dev' package is missing/incompatible error: 'libcups2' package is missing/incompatible error: 'libssl-dev' package is missing/incompatible error: 'libjpeg8-dev' package is missing/incompatible error: 'python-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libcupsimage2' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'avahi-utils' package is missing/incompatible error: 'xsane' package is missing/incompatible Total Errors: 12 Total Warnings: 0 Run 'hp-doctor' command to prompt and fix the issues. Done. -- System Information: Debian Release: jessie/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.11-2-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages hplip-gui depends on: ii dbus-x11 1.6.18-2 ii gksu 2.0.2-6 ii hplip 3.13.11-2 ii python-qt4 4.10.3+dfsg1-1 ii python-qt4-dbus 4.10.3+dfsg1-1 Versions of packages hplip-gui recommends: ii python-notify 0.1.1-3 ii simple-scan 3.10.0-1 hplip-gui suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
