Package: src:linux
Version: 3.11.10-1
Severity: normal
Tags: upstream
Dear Maintainer,
* What led up to the situation?
At first, it didn't work at all (POST never ended). After activating IOMMU on
BIOS, and disabling USB3 legacy support, I could make it boot.
Some of the functions are working (SD/MicroSD readers, I have no more type of
card available).
* What exactly did you do (or not do) that was effective (or
ineffective)?
I've tried changing every USB3 related BIOS option, with no success in avoiding
errors
* What was the outcome of this action?
* What outcome did you expect instead?
Stop making noise in dmesg/messages...
-- Package-specific info:
** Version:
Linux version 3.11-2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.2
(Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04)
** Command line:
BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/system_vg-root_lv ro quiet
splash
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 1786.459216] usb 2-2: new low-speed USB device number 70 using xhci_hcd
[ 1786.548173] usb 2-2: Device not responding to set address.
[ 1786.839969] usb 2-2: Device not responding to set address.
[ 1787.042871] usb 2-2: device not accepting address 70, error -71
[ 1787.450650] usb 2-2: new low-speed USB device number 72 using xhci_hcd
[ 1787.539602] usb 2-2: Device not responding to set address.
[ 1787.831466] usb 2-2: Device not responding to set address.
[ 1788.034298] usb 2-2: device not accepting address 72, error -71
[ 1788.442074] usb 2-2: new low-speed USB device number 74 using xhci_hcd
[ 1788.531065] usb 2-2: Device not responding to set address.
[ 1788.822884] usb 2-2: Device not responding to set address.
[ 1789.025726] usb 2-2: device not accepting address 74, error -71
[ 1789.433504] usb 2-2: new low-speed USB device number 76 using xhci_hcd
[ 1789.522476] usb 2-2: Device not responding to set address.
[ 1789.814330] usb 2-2: Device not responding to set address.
[ 1790.017158] usb 2-2: device not accepting address 76, error -71
[ 1790.424932] usb 2-2: new low-speed USB device number 78 using xhci_hcd
[ 1790.513986] usb 2-2: Device not responding to set address.
[ 1790.805861] usb 2-2: Device not responding to set address.
[ 1791.008586] usb 2-2: device not accepting address 78, error -71
[ 1791.416361] usb 2-2: new low-speed USB device number 80 using xhci_hcd
[ 1791.505395] usb 2-2: Device not responding to set address.
[ 1791.797321] usb 2-2: Device not responding to set address.
[ 1792.000012] usb 2-2: device not accepting address 80, error -71
[ 1792.407790] usb 2-2: new low-speed USB device number 82 using xhci_hcd
[ 1792.496852] usb 2-2: Device not responding to set address.
[ 1792.788619] usb 2-2: Device not responding to set address.
[ 1792.991446] usb 2-2: device not accepting address 82, error -71
[ 1793.399217] usb 2-2: new low-speed USB device number 84 using xhci_hcd
[ 1793.488169] usb 2-2: Device not responding to set address.
[ 1793.779988] usb 2-2: Device not responding to set address.
[ 1793.982870] usb 2-2: device not accepting address 84, error -71
[ 1794.390646] usb 2-2: new low-speed USB device number 86 using xhci_hcd
[ 1794.479597] usb 2-2: Device not responding to set address.
[ 1794.771493] usb 2-2: Device not responding to set address.
[ 1794.974301] usb 2-2: device not accepting address 86, error -71
[ 1795.382074] usb 2-2: new low-speed USB device number 88 using xhci_hcd
[ 1795.471029] usb 2-2: Device not responding to set address.
[ 1795.762907] usb 2-2: Device not responding to set address.
[ 1795.965728] usb 2-2: device not accepting address 88, error -71
[ 1796.373507] usb 2-2: new low-speed USB device number 90 using xhci_hcd
[ 1796.462524] usb 2-2: Device not responding to set address.
[ 1796.754373] usb 2-2: Device not responding to set address.
[ 1796.957169] usb 2-2: device not accepting address 90, error -71
[ 1797.364933] usb 2-2: new low-speed USB device number 92 using xhci_hcd
[ 1797.453925] usb 2-2: Device not responding to set address.
[ 1797.745852] usb 2-2: Device not responding to set address.
[ 1797.948586] usb 2-2: device not accepting address 92, error -71
[ 1798.356377] usb 2-2: new low-speed USB device number 94 using xhci_hcd
[ 1798.445384] usb 2-2: Device not responding to set address.
[ 1798.737197] usb 2-2: Device not responding to set address.
[ 1798.940016] usb 2-2: device not accepting address 94, error -71
[ 1799.347791] usb 2-2: new low-speed USB device number 96 using xhci_hcd
[ 1799.436841] usb 2-2: Device not responding to set address.
[ 1799.728621] usb 2-2: Device not responding to set address.
[ 1799.931445] usb 2-2: device not accepting address 96, error -71
[ 1800.339222] usb 2-2: new low-speed USB device number 98 using xhci_hcd
[ 1800.428210] usb 2-2: Device not responding to set address.
[ 1800.720084] usb 2-2: Device not responding to set address.
[ 1800.922831] usb 2-2: device not accepting address 98, error -71
[ 1801.330649] usb 2-2: new low-speed USB device number 100 using xhci_hcd
[ 1801.419653] usb 2-2: Device not responding to set address.
[ 1801.711464] usb 2-2: Device not responding to set address.
[ 1801.914301] usb 2-2: device not accepting address 100, error -71
[ 1802.322075] usb 2-2: new low-speed USB device number 102 using xhci_hcd
[ 1802.411078] usb 2-2: Device not responding to set address.
[ 1802.702940] usb 2-2: Device not responding to set address.
[ 1802.905687] usb 2-2: device not accepting address 102, error -71
[ 1803.313521] usb 2-2: new low-speed USB device number 104 using xhci_hcd
[ 1803.402521] usb 2-2: Device not responding to set address.
[ 1803.694361] usb 2-2: Device not responding to set address.
[ 1803.897107] usb 2-2: device not accepting address 104, error -71
[ 1804.304949] usb 2-2: new low-speed USB device number 106 using xhci_hcd
[ 1804.393945] usb 2-2: Device not responding to set address.
[ 1804.685842] usb 2-2: Device not responding to set address.
[ 1804.888601] usb 2-2: device not accepting address 106, error -71
[ 1805.296378] usb 2-2: new low-speed USB device number 108 using xhci_hcd
[ 1805.385424] usb 2-2: Device not responding to set address.
[ 1805.677299] usb 2-2: Device not responding to set address.
[ 1805.880032] usb 2-2: device not accepting address 108, error -71
[ 1806.287808] usb 2-2: new low-speed USB device number 110 using xhci_hcd
[ 1806.376831] usb 2-2: Device not responding to set address.
[ 1806.668619] usb 2-2: Device not responding to set address.
[ 1806.871460] usb 2-2: device not accepting address 110, error -71
[ 1807.279234] usb 2-2: new low-speed USB device number 112 using xhci_hcd
[ 1807.368273] usb 2-2: Device not responding to set address.
[ 1807.659945] usb 2-2: Device not responding to set address.
[ 1807.862889] usb 2-2: device not accepting address 112, error -71
[ 1808.270663] usb 2-2: new low-speed USB device number 114 using xhci_hcd
[ 1808.359688] usb 2-2: Device not responding to set address.
[ 1808.651429] usb 2-2: Device not responding to set address.
[ 1808.854304] usb 2-2: device not accepting address 114, error -71
[ 1809.262041] usb 2-2: new low-speed USB device number 116 using xhci_hcd
[ 1809.351065] usb 2-2: Device not responding to set address.
[ 1809.642914] usb 2-2: Device not responding to set address.
[ 1809.845731] usb 2-2: device not accepting address 116, error -71
[ 1810.253509] usb 2-2: new low-speed USB device number 118 using xhci_hcd
[ 1810.342532] usb 2-2: Device not responding to set address.
[ 1810.634343] usb 2-2: Device not responding to set address.
[ 1810.837163] usb 2-2: device not accepting address 118, error -71
** Model information
sys_vendor: To be filled by O.E.M.
product_name: To be filled by O.E.M.
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2103
board_vendor: ASUSTeK COMPUTER INC.
board_name: M5A97 EVO R2.0
board_version: Rev 1.xx
** Loaded modules:
joydev
hid_logitech
ff_memless
rpcsec_gss_krb5
nfsv4
dns_resolver
parport_pc
ppdev
lp
parport
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ext4
crc16
mbcache
jbd2
fuse
saa7134_alsa
tda1004x
saa7134_dvb
videobuf_dvb
dvb_core
tda827x
snd_hda_codec_hdmi
tda8290
hid_generic
tuner
usbhid
hid
eeepc_wmi
asus_wmi
sparse_keymap
rfkill
kvm_amd
kvm
snd_hda_codec_realtek
crc32c_intel
ghash_clmulni_intel
aesni_intel
snd_hda_intel
aes_x86_64
snd_hda_codec
ablk_helper
saa7134
cryptd
lrw
snd_hwdep
gf128mul
usb_storage
glue_helper
tveeprom
videobuf_dma_sg
snd_pcm
videobuf_core
rc_core
snd_page_alloc
v4l2_common
snd_seq
edac_mce_amd
videodev
snd_seq_device
snd_timer
edac_core
pcspkr
media
k10temp
fam15h_power
snd
sp5100_tco
i2c_piix4
soundcore
acpi_cpufreq
mperf
evdev
processor
xfs
crc32c
libcrc32c
dm_mod
sg
sr_mod
sd_mod
cdrom
crc_t10dif
firewire_ohci
microcode
firewire_core
crc_itu_t
ahci
libahci
xhci_hcd
ohci_pci
ehci_pci
ohci_hcd
ehci_hcd
libata
r8169
mii
nouveau
scsi_mod
mxm_wmi
usbcore
video
i2c_algo_bit
usb_common
ttm
drm_kms_helper
drm
i2c_core
thermal_sys
wmi
button
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether d8:50:e6:56:b2:d8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.160/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::da50:e6ff:fe56:b2d8/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 988478733 667752 0 0 0 0 0 0 8066115
72851 0 0 0 0 0 0
lo: 15394 187 0 0 0 0 0 0 15394
187 0 0 0 0 0 0
*** Protocol statistics:
Ip:
70656 total packets received
0 forwarded
0 incoming packets discarded
70628 incoming packets delivered
72898 requests sent out
11 dropped because of missing route
Icmp:
15 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 15
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
IcmpMsg:
InType3: 15
Tcp:
250 active connections openings
20 passive connection openings
3 failed connection attempts
11 connection resets received
1 connections established
70274 segments received
72312 segments send out
133 segments retransmited
77 bad segments received.
69 resets sent
Udp:
350 packets received
0 packets to unknown port received.
0 packet receive errors
396 packets sent
UdpLite:
TcpExt:
127 TCP sockets finished time wait in fast timer
5 packets rejects in established connections because of timestamp
104 delayed acks sent
Quick ack mode was activated 45 times
66420 packet headers predicted
435 acknowledgments not containing data payload received
14301 predicted acknowledgments
4 times recovered from packet loss by selective acknowledgements
11 congestion windows recovered without slow start after partial ack
1 timeouts after SACK recovery
4 timeouts in loss state
2 fast retransmits
2 forward retransmits
45 retransmits in slow start
54 other TCP timeouts
TCPLossProbes: 78
TCPLossProbeRecovery: 57
45 DSACKs sent for old packets
14 DSACKs received
12 connections reset due to unexpected data
11 connections reset due to early user close
4 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 9
TCPSpuriousRTOs: 2
TCPSackShiftFallback: 20
TCPRetransFail: 1
TCPRcvCoalesce: 156
TCPOFOQueue: 173
TCPChallengeACK: 78
TCPSYNChallenge: 78
IpExt:
InMcastPkts: 40
OutMcastPkts: 77
InBcastPkts: 12
InOctets: 948088730
OutOctets: 7051108
InMcastOctets: 5187
OutMcastOctets: 18088
InBcastOctets: 2967
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI
bridge (external gfx0 port B) [1002:5a14]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory
Management Unit (IOMMU) [1002:5a23]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory
Management Unit (IOMMU) [1002:5a23]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 72
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd000000-fe0fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000da100000-00000000da1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe300000-fe3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to
PCI bridge (PCI express gpp port G) [1002:5a1b] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fe200000-fe2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01
[AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84dd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at fe50b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe50a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe509000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe508000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe507000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. M4A89GTD PRO/USB3 Motherboard
[1043:8410]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC
host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe100000-fe1fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI2 Controller [1002:4399]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe506000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
OHCI0 Controller [1002:4397]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe505000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB
EHCI Controller [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe504000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h
Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119 [GeForce GT
610] [10de:104a] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:840d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at d8000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at fe000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation GF119 HDMI Audio Controller
[10de:0e08] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:840d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
Region 0: Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 09)
Subsystem: ASUSTeK Computer Inc. P8H77-I Motherboard [1043:8505]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 73
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at da104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at da100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB
Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
04:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA
Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: I/O ports at c050 [size=8]
Region 1: I/O ports at c040 [size=4]
Region 2: I/O ports at c030 [size=8]
Region 3: I/O ports at c020 [size=4]
Region 4: I/O ports at c000 [size=32]
Region 5: Memory at fe300000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB
Host Controller [1b21:1042] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fe200000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
06:06.0 Multimedia controller [0480]: Philips Semiconductors
SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Avermedia Technologies Inc DVB-T Super 007 [1461:f01d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe101000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: saa7134
06:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire
II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b000 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 046d:c71f Logitech, Inc. diNovo Mini Wireless Keyboard
Bus 001 Device 005: ID 046d:c71e Logitech, Inc.
Bus 001 Device 004: ID 046d:0b07 Logitech, Inc.
Bus 001 Device 003: ID 05e3:0660 Genesys Logic, Inc. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 04f3:02f4 Elan Microelectronics Corp. 2.4G Cordless Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 05e3:0732 Genesys Logic, Inc.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (650, 'experimental'), (500,
'testing-updates')
Architecture: amd64 (x86_64)
Kernel: Linux 3.11-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-2-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.11-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.40
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
