Package: installation-reports
Debian-installer-version: Nov 3 2005
uname -a: Linux trondheim 2.6.12-1-386 #1 Tue Sep 27 12:41:08 JST 2005
i686 GNU/Linux
Date: Nov 4 2005
Method: Etch installer booted from CD; used to install "sarge" packages
from DVD
Machine: Custom Shuttle ST20G5
Processor: AMD Athlon 64 3700+
Memory: 1GiB
Root Device: SATA
Root Size/partition table:
24GiB sda1 MS-Windows
1GiB sda2 swap
15GiB sda3 /
50GiB sda5 /home
160GiB sda6 unused (/mnt/data)
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev
01)
0000:00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34
0000:00:06.0 PCI bridge: ATI Technologies Inc: Unknown device 5a38
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
0000:00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:1c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:1c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:1c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
0000:00:1d.0 0403: ALi Corporation: Unknown device 5461
0000:00:1e.0 ISA bridge: ALi Corporation: Unknown device 1573 (rev 31)
0000:00:1e.1 Bridge: ALi Corporation M7101 Power Management Controller
[PMU]
0000:00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
0000:00:1f.1 RAID bus controller: ALi Corporation: Unknown device 5287
(rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0141 (rev a2)
0000:02:00.0 Ethernet controller: Broadcom Corporation: Unknown device
169d (rev 11)
0000:03:15.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
0000:00:00.0 0600: 1002:5950 (rev 01)
0000:00:02.0 0604: 1002:5a34
0000:00:06.0 0604: 1002:5a38
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:00:19.0 0604: 10b9:5249
0000:00:1c.0 0c03: 10b9:5237 (rev 03)
0000:00:1c.1 0c03: 10b9:5237 (rev 03)
0000:00:1c.2 0c03: 10b9:5237 (rev 03)
0000:00:1c.3 0c03: 10b9:5239 (rev 01)
0000:00:1d.0 0403: 10b9:5461
0000:00:1e.0 0601: 10b9:1573 (rev 31)
0000:00:1e.1 0680: 10b9:7101
0000:00:1f.0 0101: 10b9:5229 (rev c7)
0000:00:1f.1 0104: 10b9:5287 (rev 02)
0000:01:00.0 0300: 10de:0141 (rev a2)
0000:02:00.0 0200: 14e4:169d (rev 11)
0000:03:15.0 0c00: 1106:3044 (rev 80)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
Detect hard drives: modules "libata" and "sata_uli" were not
automatically loaded so the hard disk would not be recognized. Solved by
manually loading them from a console before the "detect hard drives"
phase.
Install base system: I wanted to install a "sarge" installation from
DVD, but the sarge installer kernel does not include the sata_uli driver
for my hard disk. The etch installer does. It was not clear how to do
this mixed installation. It worked when I:
- booted with the etch installer
- kept the etch installer in the CD drive for the "load installer
modules" phase
- manually changed the CD and put the first sarge DVD in the CD drive
before the "install base system" phase.
That this was difficult to do is not really your fault. I'm just telling
you in case other people ask and you want to put a short note in a FAQ.
Install boot loader: (with GRUB) it didn't realize that I had MS-Windows
installed in sda1, and so no option for booting it was included in the
automatically generated GRUB menu.lst. An additional problem is that I
didn't seem to find any editor with which I could manually modify the
GRUB menu file --so I had to "edit" it with "echo ... >> menu.lst". I
suggest adding a tiny editor, or if there is indeed an editor other than
"vi" or "emacs", I suggest adding a symlink from "editor".
Anyway, I hadn't done a Debian installation from scratch since at least
2.0, and man, what an improvement! Good job.
--
Fins aviat,
Roger Trias i Sanz :-)
--([EMAIL PROTECTED])--------------- --- -- -- - - - -
(IM: jabber.org:rogerious ICQ:91138902)-- - -
today, Tue, 08 Nov 2005 22:07:04 +0100
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
