Package: src:linux
Version: 3.11.5-1
Severity: normal
The aufs module cannot be inserted.
au_loopback_init:136:modprobe[24614]: loop_backing_file() is not defined
-- Package-specific info:
** Version:
Linux version 3.11-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.1
(Debian 4.8.1-10) ) #1 SMP Debian 3.11.5-1 (2013-10-17)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-1-amd64
root=UUID=dd840eac-0283-45e9-8f04-ef33f516d29d ro quiet i915.i915_enable_fbc=1
i915.i915_enable_rc6=7 i915.lvds_downclock=1 "acpi_osi=!Windows 2012"
init=/lib/systemd/systemd
** Tainted: CO (5120)
* Module from drivers/staging has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[71048.246927] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[71048.247137] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[71048.262934] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
[71048.295019] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[71048.310967] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[71048.311029] PM: noirq suspend of devices complete after 95.754 msecs
[71048.311471] ACPI: Preparing to enter system sleep state S3
[71048.314587] PM: Saving platform NVS memory
[71048.315106] Disabling non-boot CPUs ...
[71048.419036] smpboot: CPU 1 is now offline
[71048.523105] smpboot: CPU 2 is now offline
[71048.627195] smpboot: CPU 3 is now offline
[71048.628998] ACPI: Low-level resume complete
[71048.629055] PM: Restoring platform NVS memory
[71048.629625] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19
[71048.629715] Enabling non-boot CPUs ...
[71048.629879] smpboot: Booting Node 0 Processor 1 APIC 0x1
[71048.644182] Intel pstate controlling: cpu 1
[71048.644269] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[71048.644900] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
[71048.644904] CPU1 is up
[71048.644972] smpboot: Booting Node 0 Processor 2 APIC 0x2
[71048.658563] Intel pstate controlling: cpu 2
[71048.658619] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[71048.658959] microcode: CPU2 updated to revision 0x19, date = 2013-06-13
[71048.658962] CPU2 is up
[71048.659035] smpboot: Booting Node 0 Processor 3 APIC 0x3
[71048.672636] Intel pstate controlling: cpu 3
[71048.672690] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19
[71048.672696] CPU3 is up
[71048.676282] ACPI: Waking up from system sleep state S3
[71048.743683] i915 0000:00:02.0: power state changed by ACPI to D0
[71048.757329] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[71048.773396] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[71048.805394] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
[71048.821408] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[71048.837583] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[71048.853428] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[71048.885641] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to
50Mhz.
[71048.902353] PM: noirq resume of devices complete after 158.625 msecs
[71048.902530] PM: early resume of devices complete after 0.141 msecs
[71048.902565] i915 0000:00:02.0: setting latency timer to 64
[71048.902577] xhci_hcd 0000:00:14.0: setting latency timer to 64
[71048.902665] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[71048.902692] e1000e 0000:00:19.0: setting latency timer to 64
[71048.902710] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[71048.902779] ehci-pci 0000:00:1a.0: setting latency timer to 64
[71048.902843] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[71048.902897] ahci 0000:00:1f.2: setting latency timer to 64
[71048.902963] ehci-pci 0000:00:1d.0: setting latency timer to 64
[71048.957501] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[71049.113704] usb 3-1.6: reset high-speed USB device number 4 using ehci-pci
[71049.237655] ata5: SATA link down (SStatus 0 SControl 300)
[71049.253663] ata2: SATA link down (SStatus 0 SControl 300)
[71049.261671] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[71049.264524] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[71049.264528] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[71049.264531] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[71049.265330] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[71049.265348] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[71049.265351] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[71049.265660] ata3.00: configured for UDMA/133
[71049.265803] sd 2:0:0:0: [sdb] Starting disk
[71049.281825] usb 3-1.4: reset full-speed USB device number 18 using ehci-pci
[71049.970172] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[71051.551251] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[71051.553658] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[71051.553663] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[71051.553666] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[71051.558488] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[71051.558493] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[71051.558495] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[71051.560786] ata1.00: configured for UDMA/133
[71051.561211] sd 0:0:0:0: [sda] Starting disk
[71051.584117] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[71051.590515] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[71051.686044] PM: resume of devices complete after 2781.635 msecs
[71051.686382] PM: Finishing wakeup.
[71051.686384] Restarting tasks ... done.
[71051.697821] video LNXVIDEO:00: Restoring backlight state
[71053.012258] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
[71054.044936] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
[71075.589640] wlan0: authenticate with f8:d1:11:a0:c7:be
[71075.594371] wlan0: send auth to f8:d1:11:a0:c7:be (try 1/3)
[71075.596778] wlan0: authenticated
[71075.599365] wlan0: associate with f8:d1:11:a0:c7:be (try 1/3)
[71075.602976] wlan0: RX AssocResp from f8:d1:11:a0:c7:be (capab=0x411 status=0
aid=3)
[71075.605612] wlan0: associated
[71415.509056] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[71415.509616] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[71415.528655] thinkpad_acpi: EC reports that Thermal Table has changed
[71415.612205] xhci_hcd 0000:00:14.0: setting latency timer to 64
[71415.628243] e1000e 0000:00:19.0: setting latency timer to 64
[71415.628265] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[71415.797457] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
[71415.900539] ehci-pci 0000:00:1d.0: setting latency timer to 64
[75201.704107] aufs: module is from the staging directory, the quality is
unknown, you have been warned.
[75201.704802] aufs au_loopback_init:136:modprobe[24586]: loop_backing_file()
is not defined
[75218.372981] aufs: module is from the staging directory, the quality is
unknown, you have been warned.
[75218.373749] aufs au_loopback_init:136:modprobe[24614]: loop_backing_file()
is not defined
** Model information
sys_vendor: LENOVO
product_name: 2325CN3
product_version: ThinkPad X230
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: G2ET94WW (2.54 )
board_vendor: LENOVO
board_name: 2325CN3
board_version: Not Defined
** Loaded modules:
acpi_call(O)
hid_generic
usbhid
hid
dm_mod
ecb
rfcomm
bnep
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
parport_pc
ppdev
lp
parport
binfmt_misc
uinput
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
nls_utf8
nls_cp437
vfat
fat
snd_hda_codec_hdmi
snd_hda_codec_realtek
joydev
x86_pkg_temp_thermal
coretemp
crc32c_intel
iTCO_wdt
iTCO_vendor_support
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
glue_helper
microcode
uvcvideo
videobuf2_vmalloc
pcspkr
videobuf2_memops
btusb
videobuf2_core
efi_pstore
videodev
media
bluetooth
psmouse
efivars
serio_raw
arc4
wmi
evdev
thinkpad_acpi
tpm_tis
snd_hda_intel
tpm
iwldvm
snd_hda_codec
tpm_bios
nvram
mac80211
snd_hwdep
battery
snd_pcm
ac
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
i915
snd
iwlwifi
video
drm_kms_helper
button
drm
cfg80211
soundcore
i2c_algo_bit
i2c_i801
mperf
mei_me
rfkill
lpc_ich
mei
i2c_core
mfd_core
processor
vhost_net
tun
vhost
macvtap
macvlan
kvm_intel
kvm
fuse
ecryptfs
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod
sdhci_pci
sdhci
mmc_core
e1000e
ehci_pci
ehci_hcd
ptp
pps_core
xhci_hcd
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f1520000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f1535000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network
Connection [8086:1502] (rev 04)
Subsystem: Lenovo Device [17aa:21f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f1500000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f153b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f153a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f1530000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0d00000-f14fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0c00000-f0cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1539000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC
Controller [8086:1e55] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at 40a8 [size=8]
Region 1: I/O ports at 40b4 [size=4]
Region 2: I/O ports at 40a0 [size=8]
Region 3: I/O ports at 40b0 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at f1538000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1534000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host Controller
[1180:e823] (rev 07) (prog-if 01)
Subsystem: Lenovo Device [17aa:21fa]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0d00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205
[Taylor Peak] [8086:0085] (rev 34)
Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 5986:02d2 Acer, Inc
Bus 003 Device 018: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0
[ThinkPad]
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (980, 'unstable'), (500, 'unstable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.11-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-1-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.11-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.40
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information excluded
--
Julian Andres Klode - Debian Developer, Ubuntu Member
See http://wiki.debian.org/JulianAndresKlode and http://jak-linux.org/.
Please do not top-post if possible.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
