Package: src:linux
Version: 3.11.5-1
Severity: important
Dear Maintainer,
I report the hibernation doesn't resume Jessie on my laptop HP 635
Before to report this bug I tried to launch the kernel without any particular
setting to understand if the activation of DPM could cause problem, but the
resume doesn't work, so I had a black screen.
I'm currently using Debian Jessie, XFCE as D.E. and using the open video driver
radeon.
dmesg | grep PM:
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfb3f000-0xdfbbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfebf000-0xdfef4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.197550] PM: Registering ACPI NVS region [mem 0xdfbbf000-0xdfebefff]
(3145728 bytes)
[ 1.823952] PM: Hibernation image not present or could not be loaded.
[ 3.756687] PM: Starting manual resume from disk
[ 3.756698] PM: Hibernation image partition 8:6 present
[ 3.756701] PM: Looking for hibernation image.
[ 3.757265] PM: Image not found (code -22)
[ 3.757273] PM: Hibernation image not present or could not be loaded.
Thanks
D.
-- Package-specific info:
** Version:
Linux version 3.11-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.1
(Debian 4.8.1-10) ) #1 SMP Debian 3.11.5-1 (2013-10-17)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.11-1-amd64
root=UUID=4a47055a-2f1b-4085-9aed-06235b423ae1 ro quiet acpi_backlight=vendor
radeon.dpm=1
** Not tainted
** Kernel log:
[ 21.175921] RPC: Registered udp transport module.
[ 21.175924] RPC: Registered tcp transport module.
[ 21.175927] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.226933] FS-Cache: Loaded
[ 21.283865] FS-Cache: Netfs 'nfs' registered for caching
[ 21.364891] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 24.781108] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input13
[ 33.736565] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160
(bits) (20130517/dsopcode-236)
[ 33.736583] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD]
(Node ffff8801800a6d58), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[ 33.736604] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD]
(Node ffff8801800a8510), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
[ 33.891310] r8169 0000:06:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw
into memory
[ 34.067514] r8169 0000:06:00.0 eth0: link down
[ 34.068222] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.090419] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.677588] wlan0: authenticate with 74:9d:dc:98:7a:11
[ 36.699106] wlan0: send auth to 74:9d:dc:98:7a:11 (try 1/3)
[ 36.703794] wlan0: authenticated
[ 36.704381] ath9k 0000:07:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[ 36.704396] ath9k 0000:07:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[ 36.708578] wlan0: associate with 74:9d:dc:98:7a:11 (try 1/3)
[ 36.712077] wlan0: RX AssocResp from 74:9d:dc:98:7a:11 (capab=0x431 status=0
aid=1)
[ 36.712925] wlan0: associated
[ 36.713041] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.713267] cfg80211: Calling CRDA for country: US
[ 36.730659] ath: regdomain 0x8348 updated by CountryIE
[ 36.730674] ath: EEPROM regdomain: 0x8348
[ 36.730680] ath: EEPROM indicates we should expect a country code
[ 36.730688] ath: doing EEPROM country->regdmn map search
[ 36.730694] ath: country maps to regdmn code: 0x3a
[ 36.730700] ath: Country alpha2 being used: US
[ 36.730705] ath: Regpair used: 0x3a
[ 36.730806] cfg80211: Regulatory domain changed to country: US
[ 36.730814] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 36.730822] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2700 mBm)
[ 36.730830] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
1700 mBm)
[ 36.730837] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 36.730844] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 36.730851] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 36.730858] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
3000 mBm)
[ 36.730865] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
4000 mBm)
[ 3695.888078] usb 3-3: new low-speed USB device number 2 using ohci-pci
[ 3696.050455] usb 3-3: New USB device found, idVendor=062a, idProduct=0000
[ 3696.050472] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3696.138535] hidraw: raw HID events driver (C) Jiri Kosina
[ 3696.181679] usbcore: registered new interface driver usbhid
[ 3696.181688] usbhid: USB HID core driver
[ 3696.229544] input: HID 062a:0000 as
/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14
[ 3696.230488] hid-generic 0003:062A:0000.0001: input,hidraw0: USB HID v1.10
Mouse [HID 062a:0000] on usb-0000:00:12.0-3/input0
[ 4442.371726] perf samples too long (2513 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[10048.768490] usb 3-3: USB disconnect, device number 2
[10051.445293] EXT4-fs (sda5): re-mounted. Opts:
errors=remount-ro,data=ordered,commit=600
[10051.778536] EXT4-fs (sda7): re-mounted. Opts: data=ordered,commit=600
[10062.400202] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10062.400220] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10062.404034] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10062.404052] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10062.851792] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10062.851811] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10062.856745] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10062.856764] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10063.274442] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10063.274460] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10063.279588] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10063.279606] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10063.528516] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10063.528529] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10063.534300] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10063.534313] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10063.979673] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10063.979692] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10063.984366] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10063.984384] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10064.255429] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10064.255448] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10064.261101] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10064.261113] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10064.685853] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10064.685872] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10064.689817] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10064.689836] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10064.939384] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10064.939398] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10064.944265] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10064.944279] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10065.398140] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10065.398151] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10065.402087] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10065.402099] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10065.653463] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10065.653475] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10065.659410] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10065.659422] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10065.898372] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10065.898383] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10065.903128] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10065.903141] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10066.145265] atkbd serio0: Unknown key pressed (translated set 2, code 0xab
on isa0060/serio0).
[10066.145277] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
[10066.150182] atkbd serio0: Unknown key released (translated set 2, code 0xab
on isa0060/serio0).
[10066.150193] atkbd serio0: Use 'setkeycodes e02b <keycode>' to make it known.
** Model information
sys_vendor: Hewlett-Packard
product_name: HP 635 Notebook PC
product_version: 058A100000004C10002600000
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Hewlett-Packard
bios_version: F.43
board_vendor: Hewlett-Packard
board_name: 3577
board_version: 24.48
** Loaded modules:
hid_generic
usbhid
hid
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
loop
fuse
snd_hda_codec_realtek
snd_hda_codec_hdmi
joydev
arc4
ath9k
ath9k_common
ath9k_hw
btusb
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
ath
videodev
hp_wmi
sparse_keymap
media
mac80211
bluetooth
cfg80211
rtsx_pci_ms
memstick
kvm_amd
rfkill
k10temp
kvm
snd_hda_intel
snd_hda_codec
radeon
ttm
pcspkr
psmouse
serio_raw
evdev
drm_kms_helper
drm
wmi
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
battery
acpi_cpufreq
snd_page_alloc
sp5100_tco
i2c_piix4
i2c_algo_bit
i2c_core
button
snd_seq_midi
snd_seq_midi_event
mperf
video
ac
snd_rawmidi
snd_seq
processor
snd_seq_device
snd_timer
snd
ohci_pci
ohci_hcd
soundcore
ext4
crc16
mbcache
jbd2
mmc_block
sg
sr_mod
sd_mod
cdrom
crc_t10dif
rtsx_pci_sdmmc
mmc_core
microcode
rtsx_pci
r8169
mii
mfd_core
thermal
thermal_sys
ahci
libahci
ehci_pci
ehci_hcd
libata
usbcore
scsi_mod
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h
Processor Root Complex [1022:1510]
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root
Complex [1022:1510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Wrestler [Radeon HD 6320] [1002:9806] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at f0400000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler
HDMI Audio [1002:1314]
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 46
Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI
1.0])
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4118 [size=8]
Region 1: I/O ports at 4124 [size=4]
Region 2: I/O ports at 4110 [size=8]
Region 3: I/O ports at 4120 [size=4]
Region 4: I/O ports at 4100 [size=16]
Region 5: Memory at f044d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f044c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f044b000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus
Controller [1002:4385] (rev 42)
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00
Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f044a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0300000-f03fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI]
SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00002000-00002fff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:15.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to
PCI bridge (PCIE port 3) [1002:43a3] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0449000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0448000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 0 [1022:1700] (rev 43)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 1 [1022:1701]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 2 [1022:1702]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 3 [1022:1703]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 4 [1022:1704]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 6 [1022:1718]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 5 [1022:1716]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h
Processor Function 7 [1022:1719]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI
Express Card Reader [10ec:5209] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:3577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
07:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network
Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1461]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 002 Device 002: ID 05c8:021e Cheng Uei Precision Industry Co., Ltd
(Foxlink)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (600, 'unstable'), (50, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.11-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.11-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.11-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.11-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.11 <none>
Versions of packages linux-image-3.11-1-amd64 is related to:
ii firmware-atheros 0.40
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.40
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.40
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.11-1-amd64/prerm/removing-running-kernel-3.11-1-amd64: true
linux-image-3.11-1-amd64/postinst/depmod-error-initrd-3.11-1-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
