Package: src:linux
Version: 3.10.11-1
Severity: important
Dear Maintainer,
my laptop has just froze for a few seconds when I was working in 2d applications
and this message appeared in dmesg:
[37193.756789] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU
hung
[37193.756794] [drm] capturing error event; look for more information in
/sys/kernel/debug/dri/0/i915_error_state
[37193.759626] [drm:kick_ring] *ERROR* Kicking stuck semaphore on render ring
I'll send the i915_error_state file in the next mail.
-- Package-specific info:
** Version:
Linux version 3.10-3-amd64 (debian-ker...@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
** Command line:
BOOT_IMAGE=/vmlinuz-3.10-3-amd64 root=/dev/mapper/ssd_group-root_vlm ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 5905.457113] ata5: SATA link down (SStatus 0 SControl 300)
[ 5905.473012] ata5: EH complete
[ 5970.136003] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 5970.136022] ata5: irq_stat 0x00000040, connection status changed
[ 5970.136025] ata5: SError: { DevExch }
[ 5970.136033] ata5: hard resetting link
[ 5970.923547] ata5: SATA link down (SStatus 0 SControl 300)
[ 5970.939456] ata5: EH complete
[ 6073.003093] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6073.003102] ata5: irq_stat 0x00000040, connection status changed
[ 6073.003109] ata5: SError: { DevExch }
[ 6073.003127] ata5: hard resetting link
[ 6073.822729] ata5: SATA link down (SStatus 0 SControl 300)
[ 6073.838683] ata5: EH complete
[ 6079.814638] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6079.814647] ata5: irq_stat 0x00000040, connection status changed
[ 6079.814654] ata5: SError: { DevExch }
[ 6079.814671] ata5: hard resetting link
[ 6080.631242] ata5: SATA link down (SStatus 0 SControl 300)
[ 6080.647179] ata5: EH complete
[ 6085.105939] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6085.105944] ata5: irq_stat 0x00000040, connection status changed
[ 6085.105948] ata5: SError: { DevExch }
[ 6085.105959] ata5: limiting SATA link speed to 1.5 Gbps
[ 6085.105964] ata5: hard resetting link
[ 6085.892577] ata5: SATA link down (SStatus 0 SControl 310)
[ 6085.908494] ata5: EH complete
[ 6087.705279] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6087.705285] ata5: irq_stat 0x00000040, connection status changed
[ 6087.705288] ata5: SError: { DevExch }
[ 6087.705307] ata5: limiting SATA link speed to 1.5 Gbps
[ 6087.705310] ata5: hard resetting link
[ 6088.523126] ata5: SATA link down (SStatus 0 SControl 310)
[ 6088.539108] ata5: EH complete
[ 6132.829905] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6132.829914] ata5: irq_stat 0x00000040, connection status changed
[ 6132.829921] ata5: SError: { DevExch }
[ 6132.829938] ata5: limiting SATA link speed to 1.5 Gbps
[ 6132.829944] ata5: hard resetting link
[ 6133.648019] ata5: SATA link down (SStatus 0 SControl 310)
[ 6133.664095] ata5: EH complete
[ 6139.014843] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6139.014853] ata5: irq_stat 0x00000040, connection status changed
[ 6139.014859] ata5: SError: { DevExch }
[ 6139.014877] ata5: limiting SATA link speed to 1.5 Gbps
[ 6139.014891] ata5: hard resetting link
[ 6139.832845] ata5: SATA link down (SStatus 0 SControl 310)
[ 6139.848896] ata5: EH complete
[ 6222.941960] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6222.941969] ata5: irq_stat 0x00000040, connection status changed
[ 6222.941976] ata5: SError: { DevExch }
[ 6222.941994] ata5: hard resetting link
[ 6223.725821] ata5: SATA link down (SStatus 0 SControl 300)
[ 6223.741797] ata5: EH complete
[ 6315.739300] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6315.739310] ata5: irq_stat 0x00000040, connection status changed
[ 6315.739317] ata5: SError: { DevExch }
[ 6315.739342] ata5: hard resetting link
[ 6316.462311] ata5: SATA link down (SStatus 0 SControl 300)
[ 6316.478206] ata5: EH complete
[ 6361.881089] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6361.881106] ata5: irq_stat 0x00000040, connection status changed
[ 6361.881110] ata5: SError: { DevExch }
[ 6361.881120] ata5: hard resetting link
[ 6362.698512] ata5: SATA link down (SStatus 0 SControl 300)
[ 6362.714508] ata5: EH complete
[ 6366.603837] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6366.603841] ata5: irq_stat 0x00000040, connection status changed
[ 6366.603843] ata5: SError: { DevExch }
[ 6366.603850] ata5: limiting SATA link speed to 1.5 Gbps
[ 6366.603852] ata5: hard resetting link
[ 6367.324218] ata5: SATA link down (SStatus 0 SControl 310)
[ 6367.340169] ata5: EH complete
[ 6567.257966] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6567.257972] ata5: irq_stat 0x00000040, connection status changed
[ 6567.257976] ata5: SError: { DevExch }
[ 6567.257989] ata5: hard resetting link
[ 6568.077213] ata5: SATA link down (SStatus 0 SControl 300)
[ 6568.093191] ata5: EH complete
[ 6611.233656] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe
frozen
[ 6611.233660] ata5: irq_stat 0x00000040, connection status changed
[ 6611.233662] ata5: SError: { DevExch }
[ 6611.233669] ata5: hard resetting link
[ 6612.050617] ata5: SATA link down (SStatus 0 SControl 300)
[ 6612.066587] ata5: EH complete
[ 7592.124026] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[ 7592.180917] usb 2-1: New USB device found, idVendor=1532, idProduct=0013
[ 7592.180931] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7592.180938] usb 2-1: Product: Razer Orochi
[ 7592.180945] usb 2-1: Manufacturer: Razer
[ 7592.719704] hidraw: raw HID events driver (C) Jiri Kosina
[ 7592.754629] usbcore: registered new interface driver usbhid
[ 7592.754634] usbhid: USB HID core driver
[ 7592.762896] input: Razer Razer Orochi as
/devices/pci0000:00/0000:00:1c.3/0000:09:00.0/usb2/2-1/2-1:1.0/input/input17
[ 7592.763316] hid-generic 0003:1532:0013.0001: input,hidraw0: USB HID v1.11
Mouse [Razer Razer Orochi] on usb-0000:09:00.0-1/input0
[ 7592.763839] input: Razer Razer Orochi as
/devices/pci0000:00/0000:00:1c.3/0000:09:00.0/usb2/2-1/2-1:1.1/input/input18
[ 7592.765602] hid-generic 0003:1532:0013.0002: input,hidraw1: USB HID v1.11
Keyboard [Razer Razer Orochi] on usb-0000:09:00.0-1/input1
[37193.756789] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU
hung
[37193.756794] [drm] capturing error event; look for more information in
/sys/kernel/debug/dri/0/i915_error_state
[37193.759626] [drm:kick_ring] *ERROR* Kicking stuck semaphore on render ring
** Model information
sys_vendor: LENOVO
product_name: 20091
product_version: Lenovo IdeaPad Y570
chassis_vendor: Chassis Manufacturer
chassis_version: Chassis Version
bios_vendor: LENOVO
bios_version: 47CN30WW(V2.08)
board_vendor: LENOVO
board_name: Base Board Product Name
board_version: Base Board Version
** Loaded modules:
hid_generic
usbhid
hid
bbswitch(O)
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ndiswrapper(O)
loop
fuse
joydev
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
thinkpad_acpi
nvram
coretemp
kvm_intel
kvm
iTCO_wdt
iTCO_vendor_support
lib80211_crypt_tkip
wl(PO)
microcode
psmouse
serio_raw
pcspkr
evdev
lib80211
i915
cfg80211
jmb38x_ms
lpc_ich
i2c_i801
memstick
mfd_core
mxm_wmi
ttm
mperf
snd_hda_codec_hdmi
snd_hda_codec_realtek
ideapad_laptop
snd_hda_intel
sparse_keymap
rfkill
snd_hda_codec
battery
snd_hwdep
drm_kms_helper
snd_pcm
drm
snd_page_alloc
snd_seq
i2c_algo_bit
snd_seq_device
i2c_core
snd_timer
wmi
mei_me
processor
snd
video
button
mei
ac
soundcore
ext4
crc16
jbd2
mbcache
dm_crypt
dm_mod
sg
sr_mod
cdrom
sd_mod
crc_t10dif
crc32c_intel
ahci
ghash_clmulni_intel
libahci
libata
scsi_mod
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
glue_helper
sdhci_pci
sdhci
xhci_hcd
tg3
mmc_core
ptp
pps_core
libphy
ehci_pci
fan
ehci_hcd
thermal
thermal_sys
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group
default qlen 1000
link/ether b8:70:f4:14:bf:76 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether c0:f8:da:a6:99:da brd ff:ff:ff:ff:ff:ff
inet 192.168.1.4/24 brd 192.168.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::c2f8:daff:fea6:99da/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 85914 1018 0 0 0 0 0 0 85914
1018 0 0 0 0 0 0
wlan0: 1733892065 1896746 0 0 0 4987992 0 0 68593450
594192 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1897729 total packets received
0 forwarded
0 incoming packets discarded
1897728 incoming packets delivered
595123 requests sent out
8 dropped because of missing route
Icmp:
593 ICMP messages received
393 input ICMP message failed.
ICMP input histogram:
destination unreachable: 593
607 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 607
IcmpMsg:
InType3: 593
OutType3: 607
Tcp:
9194 active connections openings
42 passive connection openings
206 failed connection attempts
1440 connection resets received
12 connections established
1889825 segments received
586343 segments send out
615 segments retransmited
433 bad segments received.
2909 resets sent
Udp:
7275 packets received
17 packets to unknown port received.
0 packet receive errors
7299 packets sent
UdpLite:
TcpExt:
2 packets pruned from receive queue because of socket buffer overrun
2582 TCP sockets finished time wait in fast timer
30194 delayed acks sent
13 delayed acks further delayed because of locked socket
Quick ack mode was activated 893 times
156113 packets directly queued to recvmsg prequeue.
1408051 bytes directly in process context from backlog
237785535 bytes directly received in process context from prequeue
1342887 packet headers predicted
169546 packets header predicted and directly queued to user
30487 acknowledgments not containing data payload received
26109 predicted acknowledgments
4 times recovered from packet loss by selective acknowledgements
4 congestion windows fully recovered without slow start
4 congestion windows partially recovered using Hoe heuristic
1 congestion windows recovered without slow start by DSACK
44 congestion windows recovered without slow start after partial ack
5 fast retransmits
1 forward retransmits
309 other TCP timeouts
TCPLossProbes: 280
TCPLossProbeRecovery: 136
1 times receiver scheduled too late for direct processing
38 packets collapsed in receive queue due to low socket buffer
444 DSACKs sent for old packets
251 DSACKs received
297 connections reset due to unexpected data
1406 connections reset due to early user close
8 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 65
TCPSackShiftFallback: 40
TCPRetransFail: 1
TCPRcvCoalesce: 1252996
TCPOFOQueue: 31209
TCPChallengeACK: 433
TCPSYNChallenge: 433
TCPSpuriousRtxHostQueues: 314
IpExt:
InNoRoutes: 1
InMcastPkts: 11
OutMcastPkts: 13
InBcastPkts: 36
InOctets: 1707422302
OutOctets: 55616603
InMcastOctets: 3293
OutMcastOctets: 2795
InBcastOctets: 4917
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Lenovo Device [17aa:3975]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f10fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Lenovo Device [17aa:3981]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f1400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Lenovo Device [17aa:3975]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f1c04000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3975]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1c0a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Lenovo Device [17aa:3975]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f1c00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: bfb00000-bfbfffff
Prefetchable memory behind bridge: 00000000f1800000-00000000f18fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Memory behind bridge: f1b00000-f1bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: f1a00000-f1afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Memory behind bridge: f1900000-f19fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3975]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1c09000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC
Controller [8086:1c49] (rev 05)
Subsystem: Lenovo Device [17aa:3975]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:3975]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 3098 [size=8]
Region 1: I/O ports at 30bc [size=4]
Region 2: I/O ports at 3090 [size=8]
Region 3: I/O ports at 30b8 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at f1c08000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 05)
Subsystem: Lenovo Device [17aa:3975]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f1c06000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 3040 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT
555M] [10de:0deb] (rev ff) (prog-if ff)
!!! Unknown header type 7f
07:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57781
Gigabit Ethernet PCIe [14e4:16b1] (rev 10)
Subsystem: Lenovo Device [17aa:3975]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1800000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at f1810000 (64-bit, prefetchable) [size=64K]
Expansion ROM at f1820000 [disabled] [size=2K]
Capabilities: <access denied>
Kernel driver in use: tg3
08:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Broadcom Corporation Device [14e4:051b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f1b00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
09:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:3975]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f1a00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
0a:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host
Controller [197b:2392] (rev 30)
Subsystem: Lenovo Device [17aa:3976]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1903000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0a:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host
Controller [197b:2391] (rev 30) (prog-if 01)
Subsystem: Lenovo Device [17aa:3976]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1902000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
0a:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller
[197b:2393] (rev 30)
Subsystem: Lenovo Device [17aa:3976]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f1901000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
0a:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller
[197b:2394] (rev 30)
Subsystem: Lenovo Device [17aa:3976]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at f1900000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
** USB devices:
Bus 004 Device 003: ID 5986:a006 Acer, Inc
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 1532:0013 Razer USA, Ltd Orochi mouse
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.10-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-3-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
ii linux-doc-3.10 3.10.11-1
Versions of packages linux-image-3.10-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.40
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.10-3-amd64/postinst/missing-firmware-3.10-3-amd64:
linux-image-3.10-3-amd64/postinst/depmod-error-initrd-3.10-3-amd64: false
linux-image-3.10-3-amd64/prerm/removing-running-kernel-3.10-3-amd64: true
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
