Package: src:linux
Version: 3.10.11-1
Severity: normal
Hi.
After a while, not systematically, the HL-DT-ST DVD+/-RW GT10N (Hitachi LG ?)
in my Dell E5400 laptop will stop playing audio CDs, or ripping them, or
ejecting the disk.
dmesg reports this at boot :
[ 0.938128] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980
irq 43
...
[ 1.624027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.625156] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GT10N, A108, max UDMA/100
[ 1.627457] ata2.00: configured for UDMA/100
[ 1.630878] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GT10N A108
PQ: 0 ANSI: 5
Upon problems happening, /var/log/syslog reads:
Oct 13 11:24:01 jonsnow kernel: [ 5465.824067] ata2.00: exception Emask 0x0
SAct 0x0 SErr 0x0 action 0x6 frozen
Oct 13 11:24:01 jonsnow kernel: [ 5465.824078] sr 1:0:0:0: [sr0] CDB:
Oct 13 11:24:01 jonsnow kernel: [ 5465.824081] Read(10): 28 00 00 05 6d 3c 00
00 02 00
Oct 13 11:24:01 jonsnow kernel: [ 5465.824100] ata2.00: cmd
a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096 in
Oct 13 11:24:01 jonsnow kernel: [ 5465.824100] res
40/00:01:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 13 11:24:01 jonsnow kernel: [ 5465.824103] ata2.00: status: { DRDY }
Oct 13 11:24:01 jonsnow kernel: [ 5465.824108] ata2: hard resetting link
Oct 13 11:24:01 jonsnow kernel: [ 5466.144065] ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Oct 13 11:24:01 jonsnow kernel: [ 5466.146709] ata2.00: configured for UDMA/100
Oct 13 11:24:01 jonsnow kernel: [ 5466.160095] ata2: EH complete
Rebooting solves the issue, but after a while, ripping another disk will
exhibit the same issue.
There are quite a few reports about disks resets, but were more in the HD class
(for instance in RAID setups), than CD/DVD players/burners.
Maybe same problem or another. Difficult to tell.
Thanks in advance for your help.
Best regards,
-- Package-specific info:
** Version:
Linux version 3.10-3-amd64 (debian-ker...@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
** Command line:
BOOT_IMAGE=/vmlinuz-3.10-3-amd64 root=/dev/mapper/main-slash ro quiet
** Not tainted
** Kernel log:
[ 5.502849] input: Microsoft Microsoft Basic Optical Mouse v2.0 as
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3.3/6-2.3.3:1.0/input/input9
[ 5.503499] hid-generic 0003:045E:00CB.0004: input,hidraw3: USB HID v1.11
Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on
usb-0000:00:1d.0-2.3.3/input0
[ 5.623623] 3:3:1: cannot get freq at ep 0x84
[ 5.628451] iTCO_vendor_support: vendor-support=0
[ 5.631745] usb_audio: Warning! Unlikely big volume range (=3328), cval->res
is probably wrong.
[ 5.632187] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1
[ 5.632187] usbcore: registered new interface driver snd-usb-audio
[ 5.636116] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.636149] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
[ 5.636257] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.668707] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 5.668728] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 5.668743] pcmcia_socket pcmcia_socket0: cs: memory probe
0xa0000000-0xa0ffffff:
[ 5.668756] clean.
[ 5.668770] pcmcia_socket pcmcia_socket0: cs: memory probe
0x60000000-0x60ffffff:
[ 5.668789] excluding 0x60000000-0x60ffffff
[ 5.676625] input: Dell WMI hotkeys as /devices/virtual/input/input10
[ 5.983365] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input11
[ 5.999856] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio1/input/input12
[ 6.115349] Console: switching to colour frame buffer device 128x48
[ 6.118592] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.118595] i915 0000:00:02.0: registered panic notifier
[ 6.145023] acpi device:3e: registered as cooling_device2
[ 6.145464] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 6.145522] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input13
[ 6.145590] [Firmware Bug]: Duplicate ACPI video bus devices for the same
VGA controller, please try module parameter "video.allow_duplicates=1"if the
current driver doesn't work.
[ 6.145618] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.145875] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 6.195274] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input14
[ 6.220163] input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.220247] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.220315] input: HDA Intel Dock Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.220387] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 6.220455] input: HDA Intel Dock Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 7.485012] EXT3-fs (dm-0): using internal journal
[ 8.267984] fuse init (API version 7.22)
[ 8.400069] loop: module loaded
[ 9.235742] Adding 1949692k swap on /dev/mapper/main-swap. Priority:-1
extents:1 across:1949692k
[ 10.332849] kjournald starting. Commit interval 5 seconds
[ 10.333064] EXT3-fs (sda1): using internal journal
[ 10.333068] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.424390] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 10.461376] kjournald starting. Commit interval 5 seconds
[ 10.461618] EXT3-fs (dm-1): using internal journal
[ 10.461622] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 10.492439] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[ 10.522491] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 10.559552] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts:
(null)
[ 15.721211] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input20
[ 20.055231] tg3 0000:09:00.0: irq 47 for MSI/MSI-X
[ 20.121766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.737844] tg3 0000:09:00.0 eth0: Link is up at 100 Mbps, full duplex
[ 21.737851] tg3 0000:09:00.0 eth0: Flow control is on for TX and on for RX
[ 21.737878] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.816248] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.816251] Bluetooth: BNEP filters: protocol multicast
[ 22.816262] Bluetooth: BNEP socket layer initialized
[ 22.830441] Bluetooth: RFCOMM TTY layer initialized
[ 22.830453] Bluetooth: RFCOMM socket layer initialized
[ 22.830455] Bluetooth: RFCOMM ver 1.11
[ 24.227266] lp: driver loaded but no devices found
[ 24.230105] ppdev: user-space parallel port driver
[ 25.420039] Raw EDID:
[ 25.420046] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420049] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420051] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420054] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420056] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420058] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420060] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420063] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 25.420071] i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
[ 27.219628] FS-Cache: Loaded
[ 27.220140] Key type dns_resolver registered
[ 27.313530] FS-Cache: Netfs 'cifs' registered for caching
[ 27.313557] Key type cifs.spnego registered
[ 27.313566] Key type cifs.idmap registered
[ 28.596143] Ebtables v2.0 registered
[ 28.848106] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.908166] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 42.945106] 3:3:1: cannot get freq at ep 0x84
[ 42.967380] 3:3:1: cannot get freq at ep 0x84
[ 43.017480] 3:3:1: cannot get freq at ep 0x84
[ 43.039599] 3:3:1: cannot get freq at ep 0x84
[ 86.085833] 3:3:1: cannot get freq at ep 0x84
[ 86.107825] 3:3:1: cannot get freq at ep 0x84
[ 86.143960] 3:3:1: cannot get freq at ep 0x84
[ 86.166094] 3:3:1: cannot get freq at ep 0x84
[ 5362.798431] CIFS VFS: Autodisabling the use of server inode numbers on
\\192.168.0.254\disque dur. This server doesn't seem to support them properly.
Hardlinks will not be recognized on this mount. Consider mounting with the
"noserverino" option to silence this message.
[ 5465.824067] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 5465.824078] sr 1:0:0:0: [sr0] CDB:
[ 5465.824081] Read(10): 28 00 00 05 6d 3c 00 00 02 00
[ 5465.824100] ata2.00: cmd a0/01:00:00:00:10/00:00:00:00:00/a0 tag 0 dma 4096
in
[ 5465.824100] res 40/00:01:00:00:02/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 5465.824103] ata2.00: status: { DRDY }
[ 5465.824108] ata2: hard resetting link
[ 5466.144065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5466.146709] ata2.00: configured for UDMA/100
[ 5466.160095] ata2: EH complete
[ 6776.228068] CE: hpet increased min_delta_ns to 20113 nsec
** Model information
sys_vendor: Dell Inc.
product_name: Latitude E5400
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A18
board_vendor: Dell Inc.
board_name: 0D695C
board_version:
** Loaded modules:
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
md4
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
sha256_generic
hmac
nls_utf8
cifs
dns_resolver
fscache
parport_pc
ppdev
lp
parport
rfcomm
bnep
binfmt_misc
uinput
ext4
jbd2
loop
firewire_sbp2
fuse
dm_crypt
snd_hda_codec_hdmi
snd_hda_codec_idt
joydev
coretemp
kvm_intel
kvm
dell_wmi
iTCO_wdt
iTCO_vendor_support
snd_usb_audio
sparse_keymap
hid_generic
hid_belkin
dell_laptop
dcdbas
snd_hda_intel
snd_hda_codec
evdev
snd_usbmidi_lib
btusb
bluetooth
snd_hwdep
arc4
snd_pcm_oss
snd_seq_midi
microcode
pcmcia
snd_mixer_oss
snd_seq_midi_event
iwldvm
mac80211
snd_rawmidi
snd_pcm
pcspkr
psmouse
serio_raw
snd_seq
crc16
uvcvideo
snd_page_alloc
iwlwifi
snd_seq_device
snd_timer
usbhid
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
hid
i915
media
snd
yenta_socket
pcmcia_rsrc
pcmcia_core
cfg80211
i2c_i801
lpc_ich
mfd_core
soundcore
drm_kms_helper
drm
button
video
wmi
rfkill
i2c_algo_bit
i2c_core
acpi_cpufreq
mperf
processor
ac
battery
ext3
mbcache
jbd
dm_mod
md_mod
sg
sd_mod
sr_mod
crc_t10dif
cdrom
ahci
libahci
sdhci_pci
sdhci
mmc_core
firewire_ohci
libata
scsi_mod
firewire_core
crc_itu_t
tg3
ptp
pps_core
thermal
libphy
thermal_sys
ehci_pci
uhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 00:25:64:64:e2:ae brd ff:ff:ff:ff:ff:ff
inet 192.168.4.105/24 brd 192.168.4.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 2a01:e35:2ee0:e820:225:64ff:fe64:e2ae/64 scope global dynamic
valid_lft 86351sec preferred_lft 86351sec
inet6 fe80::225:64ff:fe64:e2ae/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 00:24:d6:2e:b3:a8 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 274238213 237349 0 0 0 0 0 1147 23334119
153496 0 0 0 0 0 0
lo: 407301 1305 0 0 0 0 0 0 407301
1305 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
231917 total packets received
0 forwarded
0 incoming packets discarded
231914 incoming packets delivered
148647 requests sent out
16 outgoing packets dropped
Icmp:
44 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 44
44 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 44
IcmpMsg:
InType3: 44
OutType3: 44
Tcp:
741 active connections openings
19 passive connection openings
26 failed connection attempts
61 connection resets received
4 connections established
234086 segments received
152090 segments send out
31 segments retransmited
37 bad segments received.
358 resets sent
Udp:
2055 packets received
44 packets to unknown port received.
0 packet receive errors
1614 packets sent
UdpLite:
TcpExt:
1 packets pruned from receive queue because of socket buffer overrun
317 TCP sockets finished time wait in fast timer
415 delayed acks sent
Quick ack mode was activated 17 times
131596 packets directly queued to recvmsg prequeue.
69891 bytes directly in process context from backlog
80764567 bytes directly received in process context from prequeue
167375 packet headers predicted
58091 packets header predicted and directly queued to user
1147 acknowledgments not containing data payload received
52914 predicted acknowledgments
4 other TCP timeouts
TCPLossProbes: 10
TCPLossProbeRecovery: 9
4 packets collapsed in receive queue due to low socket buffer
17 DSACKs sent for old packets
8 DSACKs received
92 connections reset due to unexpected data
61 connections reset due to early user close
4 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 3
TCPSackShiftFallback: 3
TCPRcvCoalesce: 2345
TCPOFOQueue: 442
TCPChallengeACK: 37
TCPSYNChallenge: 37
IpExt:
InNoRoutes: 3
InMcastPkts: 737
OutMcastPkts: 161
InOctets: 267311121
OutOctets: 20234904
InMcastOctets: 126996
OutMcastOctets: 13486
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at efe8 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f6afc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 84000000-841fffff
Prefetchable memory behind bridge: 0000000084200000-00000000843fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6900000-f69fffff
Prefetchable memory behind bridge: 0000000084400000-00000000845fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f6800000-f68fffff
Prefetchable memory behind bridge: 0000000084600000-00000000847fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f6700000-f67fffff
Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller
[8086:2919] (rev 02)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E)
4 port SATA Controller [AHCI mode] [8086:2929] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 43
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6afbf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Dell Device [1028:0262]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83ffffff (prefetchable)
Memory window 1: 8c000000-8fffffff
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f67ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
02:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f67ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761e
Gigabit Ethernet PCIe [14e4:1680] (rev 10)
Subsystem: Dell Device [1028:0262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f68e0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f68f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
0c:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1321]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f69fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 004 Device 003: ID 06f8:3005 Guillemot Corp. Hercules Dualpix Exchange
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 04bf:0319 TDK Corp. Bluetooth Adapter
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 006: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 006 Device 005: ID 046d:c303 Logitech, Inc. iTouch Keyboard
Bus 006 Device 004: ID 0409:55ab NEC Corp. Hub [iMac/iTouch kbd]
Bus 006 Device 003: ID 050d:3201 Belkin Components F1DF102U/F1DG102U Flip KVM
Bus 006 Device 002: ID 050d:3101 Belkin Components F1DF102U/F1DG102U Flip Hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.51
ii initramfs-tools [linux-initramfs-tool] 0.114
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-3-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-3-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:4.05+dfsg-6+deb7u3
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.40
pn firmware-libertas <none>
ii firmware-linux 0.40
ii firmware-linux-nonfree 0.40
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-3-amd64/prerm/removing-running-kernel-3.10-3-amd64: true
linux-image-3.10-3-amd64/postinst/ignoring-ramdisk:
linux-image-3.10-3-amd64/postinst/missing-firmware-3.10-3-amd64:
linux-image-3.10-3-amd64/postinst/depmod-error-initrd-3.10-3-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
